Do you have an area of interest that requires regularly updated imagery but you do not have time to check daily for this data?

Or perhaps you have a remote location that needs updated imagery but you cannot afford a new collection?

If either of these questions ring true, then you need to check our new Data Alert service on Image Hunter!

Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once this is set up, we check for new data over your area of interest every single day, and send you an email alert when we find coverage that meets your specifications.

We have a short YouTube video with directions to set up a Data Alert, check out the second video. We also have written directions for Data Alert here.

It’s that easy to find the data you need for all of your key projects.

If you would like to check out Data Alert, send us an email at sales@apollomapping.com or visit Image Hunter and click on the bell icon in the header to get started using this great service!

We love maps.

We love imagery.

We love work breaks.

We hope you like them as well!

You have really been a stellar employee in the past month, as a reward we suggest you take a work break! But before you head out, spend a few moments to check out this 30-cm WorldView-3 image collected on Halloween 2015 over the site of Super Bowl 50, Levi’s Stadium in Santa Clara, California. Now yes, you are correct that we are a bit late on putting this image in our newsletter since the Super Bowl is over, but still this is some spectacular data. And in case you were wondering, Super Bowl 50 was the third most watched event in TV history, falling about 2.5 million viewers short of the record set in 2014 for Super Bowl 49. In fact, the seven most viewed TV events in history have all been Super Bowls!

Have a great rest of your workday! J

(Images Courtesy: DigitalGlobe. Processed by Apollo Mapping for improved color accuracy and clarity.)




We settled on Moscow, Russia for this WV3 image of the month as Saint Basil’s Cathedral (seen in the first graphic here) is renowned to have one of the most colorful roofs in the world, would you agree? The other three images here were selected to showcase the amazing colors that can be seen in WorldView-3 imagery–particularly the bright green roofs which are common in Moscow. This 30-cm WV3 imagery was collected on August 21, 2015 and has been processed by Apollo Mapping to improve its clarity and colors. (Image Courtesy: DigitalGlobe)

Every time we look at WorldView-3 (WV3) imagery, we are blown away. And we hope you are equally impressed with the data! From our stop last month in Barcelona, Spain, we travel across Europe to its eastern edge, heading to Moscow, Russia for the March WV3 Image of the Month.

PLEASE NOTE: Effective November 2015, WorldView-3 prices dropped at least 25% for each and every imagery product; and prices even dropped more than 50% for shortwave infrared (SWIR) data! Are you interested in finding out more about these price drops? If so, send us an email at sales@apollomapping.com. You can also find out a bit more about these new WV3 prices in this older article from The Geospatial Times.

WorldView-3 was launched in late 2014 and it is the most advanced satellite the commercial marketplace has ever had access to. Here are a few of the features that really set it apart from the competition:

  • Improved Resolution
    • Higher resolution means you can see more detail in WV3 imagery.
    • Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR and 30-m CAVIS bands.
    • At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
    • Per US government regulation, all SWIR orders are produced at a maximum resolution of 7.5-m. CAVIS bands are not available for purchase at this time.
  • Additional Spectral Bands
    • If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
  • Better Positional Accuracy
    • With accuracies of 3.5-m CE90% or better (without ground control even!), WV3 has no rivals for its enhanced positional accuracy.
  • Daily Revisits
    • At 40 degrees latitude, WV3 will be able to image each location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
  • Increased Collection Capacity
    • WV3 features a 13.1-km swath width (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day.
    • Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.

If you are interested in WorldView-3 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.

You can also find more samples and technical information on our website here.

The January 2016 NOAA temperature percentile departure map showing record warmth across large areas of the southern and mid-latitudes as well as the far northern hemisphere.
  • The January 2016 NOAA global climate reports confirms that the streak continues! And this not a good streak folks as it was the hottest January in the 137-year record, meaning it was also the ninth month in a row to break a temperature record. It was also the 14th month in a row to rank in the top three warmest years for a given month. And finally, it was the second hottest month ever recorded, second only to December 2015.
  • The Salvation Army was founded on March 10, 1880 and in honor of this event, my Google Search of the month was, “Salvation Army and GIS.” And what I found is a bit unique for this section of the News Snippets as typically I feature an academic publication here, but hey, why not offer a bit of shameless advertising for the GIS field as it can help you get a job even with the Salvation Army. You can see in this job description for their Eastern Pennsylvania and Delaware Impact and Analytics Manager that GIS is one of the requirements. Yay GIS!
  • From last month’s review of Providence, Rhode Island’s GIS resources, we head down south with a review of South Carolina’s largest city’s online mapping tools which would be Columbia, narrowly edging out Charleston according to 2010 US Census data. And well to say that the online resources are lacking would be nice–the actual Columbia GIS homepage is simply a text placeholder. You can download static PDF maps here. The County of Richland which contains Columbia offers this WMS with a few countywide layers but that looks to be it, ugh.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

In this monthly feature, we span the globe to examine Our Changing Landscape with time series of medium resolution RapidEye satellite imagery. The RapidEye archive dates back to late 2008 and already contains more than 7 billion square kilometers of data. For March, we focus our attention on Lake Poopo, Bolivia, an environmental tragedy in the making.

The RapidEye Constellation

RapidEye is a constellation of five 5-meter medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers daily revisits to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a starting cost of $1.28 per square kilometer for all five spectral bands–academics do receive discounts. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data in the red edge band allows users to extract more useful land ‘information’ than can be from traditional 4-band imagery sources. When RapidEye imagery is ordered as a Level 3A Orthorectified product, images from multiple dates are extremely well registered, making it the ideal data source for Our Changing Landscape.

The Disappearance of Lake Poopó, Bolivia

Lake Poopó was Bolivia’s second largest lake, located some 12,090 feet above sea level, the shallow, saline lake covered 977 square miles at its average low point, measuring about 56 miles by 20 miles. With depths ranging from 8 to 18 feet, Lake Poopó was an important ecological resource for both the local residents as well as the local flora and fauna of the Altiplano Mountains in southwest Bolivia. Archeological evidence suggests permanent, subsistence-based human populations have been found in the region since about 200 BCE. Lake Poopó was also home to at least 75 bird, 14 plant and 3 algae species.

Now as you might have noticed pretty quickly, we are talking about Lake Poopó in the past tense as in December 2015, it was reported that the lake had all but completely disappeared! Given that the lake is located at a high elevation in an arid region, it was not uncommon for the lake’s levels to fluctuate greatly during the season, with levels rising during the rainy months of December to March. However, in 1995, the first warning signs of the impending doom of Lake Poopó were apparent when the lake dried up in December. Increased rainfalls in the mid to late 1990s replenished the lake but in the recent years, the lake’s waters were receding dramatically again. In fact, in 2013, the German consortium of Gitec-Cobodes predicted the demise of the lake when it found Poopó received 4.2 billion fewer gallons of water than were required to maintain it.

While Lake Poopó has come and gone in the past, many scientists think this time it may be gone for a long time as there are multiple environmental pressures on the region that compound one another. First, the Oruro Department of Bolivia is a mining region with at least 100 mines that are upstream of the lake. For many years, environmentalists have shown that heavy metals from the mine were trapped in the sediment deposited into the lake by its feeder streams. These sediments were not only toxic but they also choked out the ecosystem as the lake’s bottom rose off its original surface. Second, much of the water that once feed the lake has been diverted for both use in mining as well as for irrigation. Next, there is the pressure of global climate change which has increased local temperatures by about 1.6 degrees Fahrenheit; and higher temperatures means quicker evaporation of the lake’s waters. Finally, with climate change there has been an increase in both the frequency and severity of El Niño events which brings drought conditions to the region around Lake Poopó.

No one knows what the future will hold but the loss of this important ecological resource should concern climate change deniers and supporters alike. But regardless of your views on climate change, now it is time to turn to the 5-meter RapidEye record over Lake Poopó to see how its water levels have fluctuated in recent years.

Click on the image above to see an animation of 5-meter natural color RapidEye imagery collected over Lake Poopo, Bolivia on February 12, 2010, December 1, 2012, February 4, 2014 and January 9, 2016. When you click on this animation you might first notice how different the lake and surrounding lands look from year to year. But more importantly, you will see little change in the water level from 2010 to 2014; and then in 2016, you see that the lake is completely gone, scary stuff folks. And please excuse the cloud cover and missing data as this was a large area with few images collected close in time to each other, so we had to make do! To give you a sense of the scale, these images measure about 22 kilometers x 22 kilometers. (Images Courtesy: BlackBridge)

If you would like to find out more about using RapidEye for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.

With the pending launch of Map Mavin, it seems an appropriate time to focus on GIS (Geographic Information Systems) clouds. Specifically, in the March edition of the Geospatial Tip of the Month (GTM) I will try to answer the seemingly simple question, “What is a GIS Cloud?” I say try and answer as from my research on the topic, it is obvious that there is not a clear definition of what this service (perhaps product?) should be. As such, I will start with a quick survey of the academic research on the topic and then discuss what a GIS cloud means to Apollo Mapping.

Before we go too much farther, perhaps it makes sense to offer a definition of GIS in general. And while this is a topic we could spend many paragraphs discussing, as we did in this four-part series starting here, I will spare you from reading this diatribe by offering up my definition from the series:

GIS is a mapping software–and the field of science that studies it–which is used to answer questions on physical and/or human phenomena in a standardized and repeatable fashion.

At the backbone of any cloud service is cloud computing, which has been defined by the National Institute of Standards and Technology (NIST) as:

Cloud computing is a model for enabling convenient, on-demand network access to a shared pool of configurable computing resources (for example, networks, servers, storage, applications, and services) that can be rapidly provisioned and released with minimal management effort or service provider interaction.

So then, a working definition of a GIS cloud might be as follows (offered by Aly and Labib in this paper):

Cloud GIS is a next generation Web GIS (Geographic Information System) solution with advanced capability of collecting, processing, analyzing and publishing geospatial and database data. The main goal is to provide the power of desktop GIS solutions on a web based platform and in such way bring GIS closer to a wide audience.

Stated in a simpler fashion by me, a GIS cloud is a web-based mapping service that enables all users (even those without access or knowledge to use GIS) to answer questions on physical and/or human phenomena by employing spatial information. With this simple goal in mind, the Apollo Mapping team set out to build the most flexible and easy-to-use GIS cloud on the market–and we call this GIS cloud Map Mavin.

Here is sneak peek at the web map interface we are working on for Map Mavin. A lot will still change on the interface but at least you get a sense of where we are headed–a clean, modern interface with a functional header and real-time collaborations.

Now you might be asking yourself, what exactly is Map Mavin? Well, let me elaborate a bit. Map Mavin will be the most interactive web mapping service on the market when launched. It will let users instantly create web maps from a mashup of various spatial layers, share the URL with a team of users and then collaborate in real-time in order to make more informed and accurate decisions. Similar to any cloud service on the market, be it for mapping or Apple’s iCloud, Map Mavin has four basic components:

  1. Real-time collaboration
  2. Hosted storage
  3. A marketplace
  4. Cloud processing

And in next month’s edition of the GTM, I will elaborate on each of these four components. Until then, drop us a line at sales@apollomapping.com if you would like to find out more about our highly anticipated GIS cloud, Map Mavin!

Do you have an idea for a future GTM? If so, let me know by email at brock@apollomapping.com.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high-resolution satellite constellation, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.

Graphic Region of Interest: Australia (including its off-shore islands)

Land Mass Covered: 7,683,406.3 sq km

Time Period: October 1 to December 31, 2015

High Resolution Satellite Constellation: WorldView-2/3

WorldView-2/3 Constellation Imaging Statistics–Australia

Total Area Collected: 3,534,995.6 sq km; 19,211.9 sq km per satellite/per day

Area Collected @ 20% or Less Clouds & 30 Degrees or Less Off-Nadir: 2,324,109.0 sq km; 12,631.0 sq km per satellite/per day; 65.75% of total

This map shows the areas imaged by the WorldView-2/3 constellation from October to December, 2015 over Australia. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.

For some projects, satellites cannot offer the resolution or cloud-free conditions demanded by your project. In these instances, the solution is our 15-centimeter (cm) and 30-cm aerial imagery. Delivered in color or with four multispectral bands, our new collections of aerial imagery are a reasonably-priced solution for your next geospatial project in the United States (and beyond).

A 30-cm color aerial imagery sample collected over Houston, Texas late September 2013.
And now a 15-cm color aerial imagery sample collected over Pittsburgh, Pennsylvania on April 10, 2014.

Please Note: In December 2015, the minimum order size for tasked aerial imagery dropped to just 100 square kilometers!

Here are the key specifications of our new tasked aerial imagery offering:

  • Spectral Bands: natural color, color infrared (i.e. green, red and near-infrared) or 4-band multispectral (i.e. blue, green, red and near-infrared)
  • At Nadir Resolution: 15-cm or 30-cm
  • Typical Delivery Time: 1 to 2 months
  • Possible Coverage Area: continental United States (other geographies may be available with a custom quote)
  • Horizontal Accuracy: ~3-m CE90 (dependent on terrain, can be improved with ground control points)

Our aerial imagery offering is ideal for customers requiring competitively priced, cloud-free data at resolutions not available from a satellite sensor.

If you would like more information on our new tasked aerial imagery services, you can reach us by phone at (303) 993-3863 or email. In the meantime, you can check out additional samples and product specifications on our website here.