
This month’s 30-cm Worldview-3 image features Ottmar Hitzfeld Arena in the village of Gspon, Switzerland. Ottmar Hitzfeld Arena sits a remarkable 2,000 meters (6,600 feet) above sea level, making it the highest stadium in Europe. The stadium rests at such an altitude that it becomes part of a ski resort during the winter months. Ottmar Hitzfeld Arena is used primarily for soccer events. Nestled high in the Alps, the field sits on one of the only patches of ground flat and large enough to hold it. In fact, the stadium is surrounded by netting on 3 sides to help prevent balls from being kicked over the side of the mountain. If a ball does manage to escape the confines of the stadium, it plummets nearly 1,100 meters (3,600 feet) into the canyon below. It’s estimated that over 1,000 soccer balls have been launched into the gorge since the stadium was built in 2009. The arena is only accessible by cable cars, and the mountaintop air is crisp and thin. So thin, in fact, that it gives the home team a distinct advantage as visiting teams often struggle in the high altitude. These 30-cm WorldView-3 images of Ottmar Hitzfeld Arena and its surrounding area were captured on July 5, 2020. The first image provides an aerial view of the stadium, while the second image shows a mountain tunnel about 3 kilometers (2 miles) away from the stadium. These 30-cm WorldView-3 imagery has been processed by Apollo Mapping for improved perspective, clarity and colors. (Satellite Imagery © 2023 Maxar Technologies)Every time we look at WorldView-3 and WorldView-4 (WV3/4) imagery, we are blown away. And we hope you are equally impressed with the data! In August, we looked at Monaco’s Stade Louis II Stadium. For this edition of the 30-cm Color WorldView-3/4 Image of the Month we’re headed to Switzerland to check out the mountaintop Ottmar Hitzfeld Arena.
WorldView-3 launched in late 2014 and WorldView-4 launched in late 2016; taken together they are the most advanced satellite constellation the commercial marketplace has ever had access to. Here are a few of the features that really set these satellites apart from the competition:
- Improved Resolution
- Higher resolution means you can see more detail in WV3/4 imagery.
- Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR (WV3 only) and 30-m CAVIS (WV3 only) bands.
- At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
- Additional Spectral Bands
- If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
- Better Positional Accuracy
- With accuracies of 3.5-m CE90% or better (without ground control even!), WV3/4 has no rivals for its enhanced positional accuracy.
- Daily Revisits
- At 40 degrees latitude, WV3 is able to image every location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
- WV4 is no longer collecting new imagery.
- Increased Collection Capacity
- WV3/4 feature 13.1-km swath widths (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day per satellite (though WV4 is dead now).
- Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.
If you are interested in WorldView-3 and/or WorldView-4 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.
You can also find more WV3 samples and technical information on our website here and then WV4 samples and information can be found here.
Did you see the news that we have a satellite constellation in Image Hunter that offers high-resolution mono, video and nighttime imagery? If not, read on and find out more about this exciting constellation!
August 2023 UPDATE! CG continues to invest in their 75-cm resolution satellite constellation and we are happy to announce that we added 8 more Jilin-1 satellites to Image Hunter in the past month alone! All are a part of their GF03D series with 75-cm resolution panchromatic bands and 3-meter resolution multispectral bands. As the Jilin-1 constellation grows we are adding more content to Image Hunter, creating an ever-expanding high-resolution archive.
This 75-cm color Jilin-1 image was collected by the GF02 series over Dubai, UAE on October 31, 2021. (Image Courtesy: CG)Apollo Mapping offers high-resolution Jilin-1 imagery from satellites owned and operated by CG. This partnership unlocks a constellation of multiple satellites launched between 2015 and now. With a robust archive accessible through Image Hunter, the Jilin-1 product suite includes nighttime, video and mono imagery!
Jilin-1 offers an impressive variety of resolutions from 30-cm to 1.2-m. It’s also the only constellation boasting an array of unique capabilities, like 120-second color video collected at 92-cm and 1.2-m resolution; and 92-cm to 1.2-m color nighttime imagery. Five satellites in the Jilin-1 Video series also collect a 3.68-meter red-edge band for vegetation mapping; while satellites in the KF series collect data with a massive 136-kilometer (km) wide footprint or greater. With so many satellites in orbit, Jilin-1 revisits the same location up to six times a day, resulting in a robust archive filled with large-footprint images.
Check out some of the interesting specifications that set the Jilin-1 constellation apart from its competitors:
- Sensor Resolution: (at nadir)
- Optical A–72-cm panchromatic, 2.88-m multispectral
- Video 01/02–1.13-m color (video imaging only)
- Video 03–92-cm color (video & nighttime imaging only)
- Video 04/05/06/07/08–92-cm panchromatic, 3.68-m multispectral; 92-cm color (video & nighttime imaging only)
- GF03C-01/02/03–1.2-m color (video & nighttime imaging only)
- GF02A/GF02B/GF02C/GF02D/KF01A/GF03D/GFD03 Series–75-cm panchromatic, 3-m multispectral
- KF01B/KF01C–50-cm panchromatic, 2-m multispectral
- GF03B-01/02/03/04/05/06–1-m panchromatic, 4-m multispectral
- GF03A–1.06-m panchromatic, 4.24-m multispectral
- GF04A–30-cm panchromatic, 1.2-m multispectral
- Collection Geometry: (at nadir)
- Optical A: 11.6 km (width) x 11.6 km (length)
- Video 01/02: 4.6 km × 3.4 km
- Video 03: 11 km x 4.5 km
- Video 04/05/06/07/08: 19 km wide x up to 420 km long (pushbroom, daytime imaging); 11 km × 4.5 km (video & nighttime imaging only)
- GF02A/B: two cameras at slightly over 20 km, combined footprint width of 40 to 42 km; 2,100 km maximum length
- GF03A: 18.5 km x up to 2,280 km
- KF01A: 136 km x up to 4,200 km; full scene is divided into 23 km x 23 km sections upon data transfer
- GF02D/F: 40 km wide
- GF03C-01/02/03: 14.4 km (wide) x 6 km (long)
- GF03B-01/02/03/04/05/06, GF03D Series: > 17 km wide
- KF01B/KF01C: > 150 km wide
- GF04A: 15 km wide
You can search for Jilin-1 coverage 24-hours a day by using Image Hunter.
And you can request a new price list with 30-cm Jilin-1 added in by emailing us at sales@apollomapping.com!
- We’ve got another exciting collection of new technology developments for you! This month, the curation includes new mushroom uses, quantum magnets, and using cement, carbon and water to store energy.
Improved quantum computing could help sustainable materials.
NanoLEDs can now be grown on microchips.
Graphite can be ‘pushed’ to act like 2D graphene.
Data mining reveals fungi that could produce useful molecules for humans.
New device produces hydrogen gas from sunlight more efficiently than ever before.
Early step towards eliminating forever chemicals from the environment.
Quantum magnets could radically improve future electronics.
In the future electronics could generate their own power through changes in matter states.
New method could produce batteries more efficiently.
Cement and carbon combined with water can be used to store energy.
The NOAA extreme weather map for July 2023 shows below average sea ice extents in both the Arctic and Antarctic Seas. The Arctic ice extent was the 12th smallest on record, and the Antarctic Sea ice extent set a record low. Hurricane Don became the first Atlantic hurricane of the season, lasting a full 10 days. (Credit: NOAA’s State of the Climate Reports)- The July 2023 NOAA Global Climate Report has been released and the trends for the month are, to be honest, a bit scary. The July 2023 average global surface temperature ranked the highest on record since 1850. Many countries, including the Caribbean, South America, Peru, and Tasmania experienced their warmest July on record. South America experienced its highest monthly temperature anomaly (nearly +4 degrees Fahrenheit) of any month ever recorded. For the fourth consecutive month, global ocean surface temperatures set a record high. In fact, the waters were so warm they set a monthly sea temperature anomaly record (+1.78 degrees Fahrenheit).
- Ahoy Mateys!! Did you know that September 19th is Talk Like a Pirate Day? Our piece this month is a bit different than usual, as we’re not focusing on one specific article. Rather, we’re checking out a website that’s a treasure map to a collection of interesting articles. Our Google search of the month was “Pirates and GIS”, and it led us to discover the Davey Jones’s Locker website–a real internet treasure chest. Davey Jones’s Locker was originally a physical laboratory space run by Dr. Dawn Wright (aka Deepsea Dawn) of Oregon State University from 1998 to 2013. The lab focused on marine and coastal GIS projects. Today, although the physical lab has shut down, the site remains active. It provides a plethora of intellectual booty for curious individuals, namely links to lots of different scholarly publications (both books and articles) about the oceans and GIS. We particularly enjoyed An Inspiring Journey to Map the Deepest Part of the Ocean, which was published by ArcNews in the fall of 2022. In the piece, Dr. Wright shares about her journey to the Challenger Deep–the deepest part of the Marina Trench–and how she helped collect data to create maps of these sections of the ocean. Drop anchor at Davey Jones’s Locker and get lost in the depths of marine GIS knowledge!
- Last month we checked out the online GIS resources of for New Hampshire’s third largest city, Concord. This month we should be looking at GIS resources for New Jersey’s third largest city, Paterson. However, the city lacked online GIS resources, so we’re skipping on to Rio Rancho, New Mexico’s third largest city. Rio Ranch’s GIS system is easy to navigate with a nice collection of online materials.
Rio Rancho, NM Website
Rio Rancho, NM Contacts (GIS is part of the Public Works division, general contact information is found on the right side of the page)
Rio Rancho, NM GIS App
Rio Rancho, NM NJ GIS Map Collection
Rio Rancho, NM GIS Direct Downloads
Anne Choquette
Place Princess
¡Bienvenidos a septiembre! Nosotros en Apollo Mapping estamos gustosos de tenerlos otro mes aquí en los resúmenes españoles del mes de septiembre.
Esta imagen en color de Jilin-1 de 75 cm fue recopilada por la serie GF02 sobre Dubai, Emiratos Árabes Unidos, en octubre 31 de enero de 2021. (imágenes cortesía: CG)Producto destacado–imágenes Jilin-1–¡8 satélites de más de 75 cm agregados a Cazador de Imágenes!
¿Viste la noticia de que tenemos una constelación de satélites en Cazador de Imágenes que ofrece imágenes monocromáticas, de video y nocturnas de alta resolución? Si no, ¡sigue leyendo y descubre más sobre esta emocionante constelación!
Agosto de 2023 ¡ACTUALIZACIÓN! CG continúa invirtiendo en su constelación de satélites de resolución de 75 cm y estamos felices de anunciar que agregamos 8 satélites Jilin-1 más a Cazador de Imágenes solo en el último mes. Todos forman parte de su serie GF03D con bandas pancromáticas de resolución de 75 cm y bandas multiespectrales de resolución de 3 metros. A medida que crece la constelación Jilin-1, agregamos más contenido a Cazador de Imágenes, creando un archivo de alta resolución en constante expansión.
Apollo Mapping ofrece imágenes Jilin-1 de alta resolución de satélites propiedad de CG y operados por ella. Esta asociación desbloquea una constelación de múltiples satélites lanzados entre 2015 y ahora. Con un archivo sólido al que se puede acceder a través de Cazador de Imágenes, el conjunto de productos Jilin-1 incluye imágenes nocturnas, de vídeo y monocromáticas.
Jilin-1 ofrece una impresionante variedad de resoluciones desde 30 cm hasta 1,2 m. También es la única constelación que cuenta con una variedad de capacidades únicas, como vídeo en color de 120 segundos recopilado con una resolución de 92 cm y 1,2 m; e imágenes nocturnas en color de 92 cm a 1,2 m. Cinco satélites de la serie de vídeos Jilin-1 también recogen una banda de borde rojo de 3,68 metros para mapear la vegetación; mientras que los satélites de la serie KF recopilan datos con una enorme huella de 136 kilómetros (km) de ancho o más. Con tantos satélites en órbita, Jilin-1 vuelve a visitar el mismo lugar hasta seis veces al día, lo que da como resultado un archivo sólido lleno de imágenes de gran tamaño.
Vea algunas de las interesantes especificaciones que distinguen a la constelación Jilin-1 de sus competidores:
- Resolución del sensor: (en el nadir)
- Óptico A: pancromático de 72 cm, multiespectral de 2,88 m
- Vídeo 01/02: color de 1,13 m (solo imágenes de vídeo)
- Vídeo 03: color de 92 cm (sólo vídeo e imágenes nocturnas)
- Vídeo 05/04/06/07/08–pancromático de 92 cm, multiespectral de 3,68 m; Color de 92 cm (solo vídeo e imágenes nocturnas)
- GF03C-01/02/03: color de 1,2 m (solo vídeo e imágenes nocturnas)
- Serie GF02A/GF02B/GF02C/GF02D/KF01A/GF03D/GFD03: pancromática de 75 cm, multiespectral de 3 m
- KF01B/KF01C: pancromático de 50 cm, multiespectral de 2 m
- GF03B-01/02/03/04/05/06–pancromático de 1 m, multiespectral de 4 m
- GF03A: pancromático de 1,06 m, multiespectral de 4,24 m
- GF04A: pancromático de 30 cm, multiespectral de 1,2 m
- Geometría de la colección: (en el nadir)
- Óptica A: 11,6 km (ancho) x 11,6 km (largo)
- Vídeo 01/02: 4,6 km × 3,4 km
- Vídeo 03: 11 km x 4,5 km
- Vídeo 05/04/06/07/08: 19 km de ancho x hasta 420 km de largo (escoba, imágenes diurnas); 11 km × 4,5 km (sólo vídeo e imágenes nocturnas)
- GF02A/B: dos cámaras a poco más de 20 km, ancho de huella combinado de 40 a 42 km; 2.100 km de longitud máxima
- GF03A: 18,5 km x hasta 2.280 km
- KF01A: 136 km x hasta 4.200 km; La escena completa se divide en secciones de 23 km x 23 km tras la transferencia de datos.
- GF02D/F: 40 km de ancho
GF03C-01/02/03: 14,4 km (ancho) x 6 km (largo) - GF03B-01/02/03/04/05/06, Serie GF03D: > 17 km de ancho
- KF01B/KF01C: > 150 km de ancho
- GF04A: 15 km de ancho
Puede buscar cobertura de Jilin-1 las 24 horas del día utilizando el Cazador de Imágenes.
¡Y puede solicitar una nueva lista de precios con Jilin-1 de 30 cm agregado enviándonos un correo electrónico a sales@apollomapping.com!
Imagen BJ3A en color de 50 cm recopilada sobre Governor’s Island en la ciudad de Nueva York, Nueva York, EE. UU., el 15 de junio de 2022.Nuevos satélites y nuevos precios: ¡BJ3A + Triplesat!
Nos complace anunciar que hemos agregado un nuevo satélite, es decir, BJ3A de 4 bandas y 50 centímetros (cm), a Cazador de Imágenes este mes, ampliando nuestra oferta de imágenes de alta resolución para nuestros clientes y aumentando el archivo. BJ3A es el último satélite de la Tecnología Aeroespacial del Siglo 21, y está en Singapur, lanzado el 11 de junio de 2021. El satélite recopila datos pancromáticos de resolución de 50 cm y datos multiespectrales de resolución de 2 metros (m), incluidos rojo, verde, azul y casi bandas infrarrojas. Con una anchura de franja de 23,5 kilómetros (km), BJ3A puede recolectar la impresionante cifra de 750.000 kilómetros cuadrados por día. Puede obtener más información sobre BJ3A en nuestro sitio web y buscar en el archivo BJ3A en Cazador de Imágenes.
BJ3A se une a la constelación Triplesat de Tecnología Aeroespacial del Siglo 21, una constelación de tres satélites con una resolución de 80 cm y cuatro bandas multiespectrales. También nos complace anunciar una caída en el precio de las imágenes de archivo Triplesat, que ahora cuestan $6 por kilómetro cuadrado, independientemente de la fecha de recopilación de la imagen.
Vea algunos de los componentes clave de BJ3A:
- Bandas espectrales:
- Pancromático
- Multiespectral de 4 bandas (azul, verde, rojo y rojo infrarrojo cercano [NIR])
- Resolución del sensor:
- En el nadir: pancromático de 50 cm y multiespectral de 2 m
- Rango de longitud de onda de banda espectral: (en nm)
- Pancromático–450 a 700
- Azul–450 a 520
- Verde: 520 a 590
- Rojo: 630 a 690
- NIR–770 a 890
- Rango dinámico: 12 bits
Si está interesado en una nueva lista de precios que incluya BJ3A de 50 cm, así como costos actualizados de Triplesat, envíenos un correo electrónico a sales@apollomapping.com y nos comunicaremos con usted.
Tu descanso laboral de imágenes–Burning Man 2022
Nos encantan los mapas.
Nos encantan las imágenes.
Nos encantan las pausas laborales.
¡Esperamos que a ti también te gusten!
Septiembre ya está aquí y estamos listos para que el clima comience a refrescar y esos días frescos y coloridos de otoño. Para tu descanso laboral de hoy, toma una deliciosa bebida (¿es demasiado temprano para un Latte de Calabaza?) y sal a caminar. Mientras toma su bebida, tómese un momento para ver esta imagen de Pléiades Neo 4 de 30 centímetros (cm) recopilada sobre Black Rock City, Nevada, aproximadamente a las 11:58 a. m. hora local (hora de verano del Pacífico) el 29 de agosto de 2022. Esta imagen ¡Fue capturada durante el Festival Burning Man 2022!
Cada año, Hombre Quemándose tiene lugar a finales del verano en el remoto desierto de Black Rock, en Nevada. El Quemazón 2022 se desarrolló del 28 de agosto al 5 de septiembre. El Hombre Quemándose inaugural tuvo lugar en 1986 en una playa de San Francisco, donde algunos amigos crearon una figura de madera y la arrastraron a la playa para quemarla en el solsticio de verano. Mientras la escultura ardía, una multitud curiosa se reunió para contemplar el infierno. Nació la leyenda del Quemazón. Desde entonces, el evento ha crecido exponencialmente y atrae hasta 70.000 personas cada año.
Hoy en día, Hombre Quemándose se lleva a cabo anualmente en Black Rock, Nevada, en lo que los que queman (asistentes al festival) llaman “la playa”. El festival se centra en los temas centrales de comunidad, autoexpresión, autosuficiencia y arte durante cada uno de sus eventos. El nombre del evento proviene de su ceremonia final, la quema de una gran estatua humanoide de madera, conocida como el Hombre, en la última noche del festival. El festival se basa en 10 Principios para regir cada evento y crear el espíritu de magia que lo impregna. Los quemadores asisten al festival con magníficos trajes, exploran las increíbles obras de arte alrededor de la playa y se conectan entre sí entre las arenas del desierto. Para ver algunos de los increíbles disfraces y arte del festival de 2022, haga clic aquí y aquí.
Esta imagen de Pléiades Neo 4 de 30 cm fue recopilada la mañana del 29 de agosto, segundo día del Burning Man 2022.
¡Que tengas un excelente descanso de tu jornada laboral!
(Imagen cortesía de Airbus. Procesada por Apollo Mapping para mejorar la precisión y claridad del color).
The deep sea has always fascinated humanity with its enigmatic and uncharted depths. It’s remarkable that oceans covers nearly 71% of Earth’s surface, and only 5% of it has been explored. The deep sea is often considered the Earth’s final frontier and remains one of the least understood ecosystems on the planet. The unplumbed depths are home to an array of incredible potential resources and knowledge, if only we can access them. Luckily, new technological developments allow us to learn more about the secrets of the ocean.
Exploring underwater caves opens new possibilities for delving into our past. (Credit: Francisco Davids)Meet the SUNFISH, a cutting-edge, autonomous underwater vehicle designed for deep sea exploration. SUNFISH was designed by Stone Aerospace in collaboration with NASA to explore the Jovian moon Europa. The robot can navigate terrain inaccessible to humans due to tight spaces, cold waters and dangerous circumstances using artificial intelligence (AI) and Simultaneous Localization and Mapping (SLAM) to autonomously explore undersea environments.
The SUNFISH was recently deployed for the Our Submerged Past expedition, a mission based around the supposition that humans have made homes in North America for 17,000 years. Some of the land the First Peoples originally inhabited is now underwater, but evidence of their presence is preserved in submerged caves and shelters. Using the SUNFISH, the Our Submerged Past team located, explored, mapped and attained sediment samples from these caves. The mission was completed in two expeditions. The first, in May through June 2022, used side-scan sonar to locate underwater anomalies and caves that could have been accessible to ancient peoples. During the second part of the expedition, which took place between May and June of 2023, the SUNFISH collected sediment samples from the previously identified caves and rock shelters.
The SUNFISH is pivotal to advancing our ability to explore and understand the deep sea. Continuing to unveil the secrets of our oceans have far-reaching implications, from improving our knowledge of marine biodiversity to better understanding the origins of humankind. The depths of the ocean continue to beckon us, inviting us to uncover its unparalleled beauty and uncover its secrets, one dive at a time.
To check out super cool images and videos from the Our Submerged Past expedition, click here.
Find fun, educational games for the whole team with Steam Powered Family. (Credit: Markus Spiske)The kids are back in school, and fall is just around the corner. As a parent, autumn is one of my favorite times to be outside with my kids. The temperatures are cooler, the leaves are changing, and there are so many interesting things to explore.
If you’re looking for fall activities to do with your kids, whether indoors or outdoors, look no further than Steam Powered Family. The activities from Steam Powered Family are geared toward elementary school aged kids, but are still fun for all kids-at-heart! A few of our favorites from their list of Fall STEAM activities include: building a pumpkin battery, using chemistry to make candy corn bath bombs, and physics based Thanksgiving turkey balloon races.
Steam Powered Family provides a ton of other resources for families. The website has a plethora of activities, sorted by which branch of science you want to explore, STEM education topics, seasons and holidays and more. They also have an amazing section of the website devoted to mental health resources. Educators can check out their selection of classroom activities and ideas.
If you’re looking for free, fun, educational activities to do with your family this fall, we highly recommend checking out the STEAM Powered Family!
Anne Choquette
Place Princess
We love maps.
We love imagery.
We love work breaks.
We hope you like them as well!
September’s here, and we’re ready for the weather to start cooling off and those brisk, colorful autumn days. For your work break today, grab a yummy drink (is it too early for a Pumpkin Spice Latte?) and take a stroll outside. While grabbing your drink, take a moment to check out this 30-centimeter (cm) Pléiades Neo 4 image collected over Black Rock City, Nevada at about 11:58 AM local time (Pacific Daylight Time) on August 29, 2022. This image was captured during the 2022 Burning Man Festival!
Every year, Burning Man takes place at the end of summer in Nevada’s remote Black Rock Desert. The 2022 Burn ran from August 28th through September 5th. The inaugural Burning Man took place in 1986 on a San Francisco beach, where some friends created a wooden figure, and dragged it onto the beach to burn on the Summer Solstice. As the sculpture burned, a curious crowd gathered to watch the inferno. The legend of the Burn was born. Since then, the event has grown exponentially, attracting as many as 70,000 people each year.
Today, Burning Man takes place annually in Black Rock, Nevada, on what Burners (festival goers) refer to as “the playa”. The festival focuses on the core themes of community, self-expression, self-reliance, and art during each of its events. The name of the event stems from its final ceremony, the burning of a large wooden humanoid statue, known as the Man, on the last night of the festival. The festival relies on 10 Principles to govern each event and create the spirit of magic that pervades it. Burners attend the festival in magnificent costumes, explore the incredible works of art around the playa and connect to each other among the desert sands. To see some of the amazing costumes and art from the 2022 festival, click here and here.
This 30-cm Pléiades Neo 4 image was collected on the morning of August 29th, second day of the 2022 Burning Man.
Have a great rest of your workday! 😊
(Image Courtesy: Airbus. Processed by Apollo Mapping for improved color accuracy and clarity.)
If you are searching for medium and high-resolution satellite imagery, the search is over as Image Hunter is the solution you’ve been looking for! Featuring satellite and aerial imagery as well as digital elevation models (DEMs) from a constantly expanding list of 59 sensors/datasets and 19 vendors, our database contains more than 117-million images/records meaning there is just no other website out there with this breadth of commercial data products. Our interface is slim-lined and modern, loading quickly on all platforms, browsers and operating systems. Further, our database is updated multiple times an hour with the most recent images collected by WorldView-3, Pléiades 1, PlanetScope, SuperView-1 and many more so you are sure to get the most current view of all the imagery and DEM databases we work with. Once you submit your request, an Apollo Mapping representative will be in touch within 4 Colorado business hours to get you the pricing information you need for your project.
So why wait? Give Image Hunter a try now to find the imagery and/or DEM data you need for your next mapping project!
Key September Improvement(s)
After spending a few months on front end changes that were highly visible, such as adding in multiple new high-resolution satellites, our attention for the past month turned to back end fixes that users might not notice but surely help the system. Most of these items include small bug fixes, system updates and code base updates.
Here is a summary of the changes/improvements we made to Image Hunter during the past month:
- Improved the handling of KML and KMZ polygon uploads.
- Restored multiple broken imagery updates.
- Started working on a massive code-base/system-wide update.
Data Alert–An Automated Daily Imagery Search
Have you checked out Data Alert which lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active? Once an alert is set up, we check for new data over your area of interest every single day, and send you an email when we find coverage that meets your specifications. We have a short YouTube video with directions to set up a Data Alert, check out the last video; and we have written directions for Data Alert here.
The Sensors Available in Image Hunter
As you might have seen in past articles, we now feature hourly updates (seriously!) of GaoFen 1/2, GeoEye-1, KOMPSAT 2/3/3A, Pléiades 1 and Neo, SPOT 6/7, SuperView-1, TripleSAT, WorldView-1/2/3/4 and ZiYuan-3!
Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite (and aerial!) imagery on the market today, including:
- WorldView-4
- WorldView-3
- WorldView-2
- WorldView-1
- QuickBird
- GeoEye-1
- IKONOS
- EROS B
- KOMPSAT-3A
- KOMPSAT-3
- KOMPSAT-2
- Pléiades 1 constellation
- Pléiades Neo constellation
- GEOSAT-1
- GEOSAT-2
- TripleSat
- BJ3A
- SPOT 1 to 7 constellation
- RapidEye
- GaoFen-2
- GaoFen-1
- ZiYuan-3 01/02 (mono and stereo!)
- FORMOSAT-5
- FORMOSAT-2
- ALOS PRISM (stereo)
- AW3D Standard (DEM)
- SkySat constellation
- PlanetScope constellation (including 5-band SuperDove data)
- SuperView-1 constellation
- SuperView-2
- SuperView NEO-1 01/02
- Landsat 1-8
- TeLEOS-1
- Hexagon (HxGN Content Program aerial imagery) imagery + DEM
- WorldDEM
- WorldDEM Neo
- Vricon DEMs
- Orbita Hyperspectral Satellite (OHS)
- KazEOSat-1
- KazEOSat-2
- Jilin-1 Optical
- Jilin-1 Video (including nighttime imagery)
- Jilin-1 GF/DP
- Jillin-1 KF
- Orbita Video Satellites-1/2/3 (OVS-1/2/3)
- BlackSky Global series
Key Features of Image Hunter
If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide image previews, then Image Hunter is the solution to your woes as it features:
- Online browsing of satellite and aerial imagery from 19 data providers and 56 satellite and aerial imagery derived datasets.
- Near-instantaneous loading of low-resolution preview imagery with collection date, cloud cover and other key metadata.
- The ability to define your area of interest by address, coordinates, geometric shape or shapefile/KMZ.
- A responsive basemap with street names to provide spatial context when discovering data as well as crowd-sourced updates for the most accurate map possible.
- Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
- Support for all operating systems, and not just our friends with Windows machines!
Image Hunter can be accessed here all day and night, we are excited to find out what you think about our imagery search engine! So if you have any ideas and/or feedback to improve Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.


