The end of 2016 saw the passing of one of the most well-known American astronauts, John Glenn. During the Cold War, John Glenn was the poster child for space exploration and American ingenuity. He became the first American to orbit the Earth on February 20, 1962, jettisoning the U.S. into the space race with the USSR. Despite the failure of the automatic system on his maiden voyage and the subsequent discovery that the heat shield was loose, Glenn managed to return to Earth safely, becoming a national hero.

John Glenn examines the artwork for his Mercury spacecraft, called the Friendship 7. (Credit: NASA)

He served four terms as a U.S. senator from Ohio. In 1998, he again returned to space on the shuttle Discovery for a 9-day mission, making him the oldest person in space at the age of 77. I highly recommend watching The Right Stuff for a dramatic and highly entertaining rendition of the Mercury mission.

My favorite bit of space news actually occurred in 2015, but wasn’t released until February of 2016, so I’m counting it as 2016 news. The first ever detection of gravitational waves on December 26, 2015 confirms a major prediction of Albert Einstein’s theory of relativity, 100 years after it was hypothesized. As two black holes merge, the force of their collision turns mass into energy creating gravitational waves, seen as ripples in the fabric of spacetime. Researchers using LIGO interferometers measured a minute change in distance between two mirrors, detecting the distortion of spacetime and confirming the existence of gravitational waves. An amazing discovery 100 years in the making!

This simulation depicts the merger of two black holes and the resulting gravitational waves. (Credit: NASA/C. Henze)

In science news, researchers sequenced DNA on the ISS for the first time this year. By the end of 2016, over one billion base pairs of DNA were analyzed using a hand-held device developed by Oxford Nanopore Technologies called the MinION. With this device, crew members now have the power to identify microbes they collect in space, both onboard and off. Infectious disease as well as crew health can be quickly analyzed and processed in a matter of minutes without having to send samples back to Earth. Think of it as a real life Tricorder (my fellow Trekkies will understand), my inner nerd is showing through.

The first DNA sequencing in space was performed by NASA astronaut Kate Rubins using the MinION device. (Credit: NASA)

We took the good with the bad in 2016, great strides followed by a great loss. We look to 2017, into the unknown, like the mysteries of space we hope for the best and steel ourselves to the worst. Apollo Mapping wishes you a very Happy New Year!

In our last edition of 2016, we stopped in France with a look at a modern stadium and for our first 2017 edition of the Pléiades 1 Stadium of the Month, we travel back to the States with a look at one of college football’s iconic arenas, Spartan Stadium.

A 50-cm color image of Spartan Stadium in East Lansing, Michigan collected on September 14, 2016 by Pléiades 1B. To see this stadium in SPOT 6/7 1.5-meter resolution, check out this month’s feature on SPOTMaps. This image has custom processing and color balancing applied by Apollo Mapping. © CNES 2017, Distribution Airbus Defense and Space / Spot Image S.A., France, all rights reserved.

Name & Its Origin: Michigan State University’s mascot is the Spartan and since 1956, their football stadium has been appropriately (but not creatively) named Spartan Stadium.

Location: Spartan Stadium is located in the central Michigan city of East Lansing on the campus of Michigan State University. The stadium is nearly equidistant from three of America’s Great Lakes, i.e. Lake Erie, Lake Huron and Lake Michigan, at about 840 feet above sea level.

Stadium Capacity/Size, Architect & Build Date: Michigan State’s football stadium officially opened in 1923 with a capacity of just 14,000 seats. Over its 93-year life time, Spartan Stadium has been renovated and expanded multiple times. In 2012, the university committed more than $34 million to Spartan Stadium for improved gates and entryways, video screens and scoreboards as well as the sound system and training facilities. Today, the stadium has a capacity of 75,005 fans.

Type of Field Surface: When opened, Spartan Stadium featured a natural grass field but in 1969 this was replaced with artificial turf. Then in 2002, the field returned to natural grass. The current field was apparently grown in Colorado at Graff’s Turf Farms and features four varieties of Kentucky bluegrass.

Key Sports Teams: Spartan Stadium is football country and so the only sports team that plays here is the Spartan’s men’s football team who is admittedly having an off-year with a final 2016 record of 3 wins and 9 loses.

Most Popular Yearly Event: Any home Michigan State football game is the event of the week, and year after year the annual attendance ranks in the league’s Top 20. It appears that some other smaller events and even converts are hosted here but there are few if any details on them.

Fun Factoids: (1) Since 1957, Spartan Stadium has hosted 167 sold out football games. (2) It took three days and 26 refrigerated trucks to deliver new sod to the stadium in 2011 from Colorado. (3) The south and north video screens at Spartan Stadium cover a combined 13,300 square feet and the south end zone structure stands some 130 feet tall!

The Pléiades 1 High-Resolution Satellite Constellation

The Pléiades 1 constellation (or at least part of it!) has been in orbit since December 2011 and if you have not had a chance to check out any sample imagery, take a few moments and have a look at the gallery on our website. If you work with high resolution imagery, you should consider Pléiades 1 for your next geospatial project.

A variety of Pléiades 1 products are available from both a growing archive and as a new collection, including 50-centimeter (cm) pansharpened imagery and 50-cm panchromatic–2-meter (m) 4-band multispectral bundles. We are happy to discuss the technical specifications, pricing and tasking options available with this satellite constellation.

Working with Pléiades 1 since the launch of the first twin satellite, P1A, we have noticed that:

  • Airbus Defense and Space is able to deliver on their tasking feasibilities.

The Apollo Mapping sales team can answer any questions you might have about the high resolution satellite constellation, Pléiades 1. We can be reached anytime at (303) 993-3863 or sales@apollomapping.com.

More sample images and technical information about Pléiades 1A and 1B can be found on our website here.

2016 was a long year, we approached 2017 like the end of a marathon, exhausted yet hopeful. Now it’s time to take a look back and see what we accomplished in space exploration and scientific discovery.

This artist’s depiction of the OSIRIS-Rex spacecraft shows how the craft will collect samples once it reaches the asteroid Bennu. (Credit: NASA)

In space exploration news, the Origins, Spectral Interpretation, Resource Identification, Security-Regolith Explorer (OSIRIS-REx) launched into space heading toward the asteroid Bennu. This is NASA’s first mission to land on an asteroid, retrieve a sample and then return it to Earth. OSIRIS-REx should make it back to Earth with its sample by 2023. While we have a long wait for the spacecraft’s return, researchers will receive data from OSIRIS-REx long before the physical sample makes it back.

While OSIRIS-REx is on its way out, Juno finally reached its destination, entering Jupiter’s orbit on July 4th after a five-year journey. Juno is collecting data on Jupiter’s atmosphere, composition and origins, giving researchers years of information to analyze and numbers to crunch. On the planet discovery front, the Kepler mission identified 1,284 planets, opening our eyes to the very real possibility that an Earth-like planet may exist within our field of view.

NASA used research data collected on the ISS to breakdown common and uncommon health effects on women and men when on Earth and when in space. (Credit: NASA)

On the International Space Station (ISS), NASA astronaut Scott Kelly and Russian cosmonaut Mikhail Kornienko spent 340 days in orbit above the planet, setting a record for the longest stay on the ISS. They may be back home, but the data collected from their one-year mission is still used to assess the impacts of long-term space flight on the human body and psyche. Floating in a tin can is no easy feat; and there is limited data on how long periods of space flight in a confined area, with the same group of people, affects an individual. With long-term space flight in our future, human research is increasingly important to the health and safety of the mission. The crew aboard the ISS also studied fire in space with the Saffire experiments. Fire is a major risk and mitigating its effects by preventing fire danger is the main goal.

These are just brief highlights of the strides NASA and its partners made in 2016. They also worked extensively on the Orion and SLS program, focused on new propulsions systems and released numerous patents for use in the commercial sector. 2016 was a busy year for NASA, hopefully 2017 will be just as productive. For more highlights from 2016 check out my Out of This World article.

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe Basemap (GBM).

With DigitalGlobe Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of GBM is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

December 2016 Product Update

The available DigitalGlobe Basemap imagery over the United States by location and the most recent coverage date. In the vast majority of locations, there are multiple imagery dates available.

In November we looked at the GBM coverage over Canada, and this month we move south with a look at coverage over the United States. And much like the other countries we have looked at recently, the coverage is very robust over the United States. Further, it will improve significantly once the winter is over and locations can be updated again with snow-free imagery. Also keep in mind that the values below include Alaska which is huge and hard to update given the short growing season; that definitely skews the numbers downward. Now here are the coverage stats to review!

  • United States GBM Coverage By Year
    • Less than 1 year (yr) old–6,192,378 sq km, 65.42% coverage of United States
    • 1 to 2 yr old–7,746,804 sq km, 81.84% coverage
    • 2 to 3 yr old–6,260,664 sq km, 66.14% coverage
    • 3 to 4 yr old–5,002,001 sq km, 52.84% coverage
    • 4 yr old and greater–8,724,545 sq km, 92.17% coverage
    • Total coverage–33,926,392 sq km
    • Total (approximate) area of the United States–9,465,833 sq km

DigitalGlobe Basemap Product Specifications

  • Geographic Regions Covered: defined area of interest, US county, country or global
  • Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 30-cm for other delivery mechanisms
  • Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
  • Database Update Frequency: annual, semi-annual, quarterly or daily; updates are to limited portions of the database, not the entire database
  • Data Accuracy: 8.5-meter CE90%
  • Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
  • Pricing Model: transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)
  • Subscription Term: annual

For more information on the pricing and coverage available in DigitalGlobe Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.

Every time we look at WorldView-3 (WV3) imagery, we are blown away. And we hope you are equally impressed with the data! In November, we featured Chicago, Illinois (home of the World Series champs, the Cubbie Bears!) for the WV3 Image of the Month; and in December we jump across the “pond” with a look at one of the most unique military bases in the world, the Maunsell Army Sea Forts off the coast of the United Kingdom.

These seven decommissioned gun turrets once protected the vulnerable shores of the United Kingdom from pending German attacks. Today, the Maunsell Army Sea Forts stand as a testament to an era of terror and hate that we will hopefully never endure again. This 30-cm WorldView-3 image was collected November 4, 2014 and has been enhanced by Apollo Mapping for improved colors and sharpness. (Image Courtesy: DigitalGlobe)

PLEASE NOTE: Effective May 2016, WorldView-3 prices dropped again! Are you interested in finding out more about these price drops? If so, send us an email at sales@apollomapping.com.

WorldView-3 launched in late 2014 and it is the most advanced satellite the commercial marketplace has ever had access to. Here are a few of the features that really set it apart from the competition:

  • Improved Resolution
    • Higher resolution means you can see more detail in WV3 imagery.
    • Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR and 30-m CAVIS bands.
    • At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
    • Per US government regulation, all SWIR orders are produced at a maximum resolution of 7.5-m. CAVIS bands are not available for purchase at this time.
  • Additional Spectral Bands
    • If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
  • Better Positional Accuracy
    • With accuracies of 3.5-m CE90% or better (without ground control even!), WV3 has no rivals for its enhanced positional accuracy.
  • Daily Revisits
    • At 40 degrees latitude, WV3 will be able to image each location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
  • Increased Collection Capacity
    • WV3 features a 13.1-km swath width (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day.
    • Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.

If you are interested in WorldView-3 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.

You can also find more samples and technical information on our website here.

In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high-resolution satellite constellation, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.

This map shows the areas imaged by the Pléiades 1 constellation from January 1 to March 31, 2016 over Australia. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.

Graphic Region of Interest: Australia plus off-shore islands

Land Mass Covered: 7,683,406.3 sq km

Time Period: January 1 to March 31, 2016

High-Resolution Satellite Constellation: Pléiades 1 (i.e. Pléiades 1A and 1B)

Pléiades 1 Constellation Imaging Statistics–Australia

Total Area Collected: 714,515.5 sq km; 3,925.9 sq km per satellite/per day

Area Collected @ 20% or Less Clouds & 30 Degrees or Less Off-Nadir: 422,566.1 sq km; 2,321.8 sq km per satellite/per day; 59.1% of total

We have the final pre-launch release of Map Mavin in our hands and we are testing it now. And so assuming that everything tests out as planned, we hope to launch Map Mavin next month! We are superstitious here so let’s leave this month’s update to that short and sweet few sentences.

In the meantime, check out the latest Map Mavin Methods video where Fletcher explains user privileges and roles:

While we are busy readying Map Mavin for launch, now is a great time to tell you a bit more about our soon-to-launch web mapping service.

Some of you may have used other GIS cloud services in the past, and in many ways the Map Mavin will be similar to these. But the Map Mavin will distinguish itself in a variety of important manners. Here are the key features that will make unique Map Mavin unique.

Access

We’re here to help give meaning to your data. With Map Mavin, you can share your data with whomever you’d like, whenever you’d like, from whatever device you’d like. Backed up by redundant and distributed Amazon S3 servers, you can rest assured you’ll never lose your hard work. Plus, we’re versatile: Map Mavin accepts a wide variety of data formats, including shapefiles, KMLs and KMZs, GeoTIFFs and geodatabases. You can easily download your data anytime with our handy, high–speed export features. Share it or protect it — you have complete access and control with Map Mavin.

Create

After you upload your data to Map Mavin, the real fun begins. Our easy–to–navigate web interface allows you unlimited power to give your data impact and meaning. Using our secure, robust GIS cloud, you can even use the same data to create unique maps shared with different users or teams — just like creating different playlists sourced from the same music library. Keep it private or public, it’s your choice–the possibilities are infinite.

Collaborate

Creating and sharing a map is one thing, but with Map Mavin, your whole team can collaborate and connect in real time. Once you invite users to a map, you can start making informed decisions together based on your data and needs. Within this new geographical context, you can reach important decisions easily — such as where to put a road, where to send doctors or even as simple as where to go for a hike. And with our real-time collaboration mode, you can chat with your peers or lead an all–user meeting from anywhere in the world. Included at no extra cost, you can have all hands on deck to make your web maps the best they can be.

Get Started

We like to think of ourselves as the Robin Hoods of GIS — and we believe that quality map–making software should be accessible to everyone! After all, faint-worthy contracts never won fair lady. We’re not fans of contracts that force you to pay for a product you don’t use, so we made our service month–to–month and contract free. With affordable pricing and flexibility unheard of in the GIS industry, we want to help you create meaningful, impactful maps that give you the power to make informed decisions — whether it’s for a critical medical project in another country, or a new neighborhood to raise your kids.

Do you have any specific questions you would like answered about the Map Mavin? If so, let us know by email at sales@apollomapping.com.

Do you have an area of interest that requires regularly updated imagery but you do not have time to check daily for this data?

Or perhaps you have a remote location that needs updated imagery but you cannot afford a new collection?

If either of these questions ring true, then you need to check our new Data Alert service on Image Hunter!

Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once this is set up, we check for new data over your area of interest every single day, and send you an email alert when we find coverage that meets your specifications.

We have a short YouTube video with directions to set up a Data Alert, check out the second video. We also have written directions for Data Alert here.

It’s that easy to find the data you need for all of your key projects.

If you would like to check out Data Alert, send us an email at sales@apollomapping.com or visit Image Hunter and click on the bell icon in the header to get started using this great service!