Starting immediately, Apollo Mapping is happy to announce that federal government agencies, and their prime subcontractors, now receive a 50% discount on all DigitalGlobe imagery products!
In order to qualify for the discount, your organization must meet these criteria:
A 30-cm color WorldView-3 image of Davis-Monthan Air Force Base collected on December 28, 2014. This image has been processed by Apollo Mapping for improved colors and clarity. (Credit: DigitalGlobe)- Imagery can only be licensed to a single federal government agency, for example the Environmental Protection Agency (EPA).
- If ordered by a prime subcontractor, an award letter or similar documentation must be provided to prove the project scope is for a single government agency. Imagery would be licensed to this single agency only and would have to be deleted by the prime subcontractor at the end of the project.
If you would like to review the federal government license for DigitalGlobe imagery, it can be downloaded here.
And if you have any questions about the new license and its associated discount, send us an email at sales@apollomapping.com.
In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high-resolution satellite constellation, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.
This map shows the areas imaged by the WorldView-2/3/4 constellation from October 1 to December 31, 2017 over Australia and its islands. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.Graphic Region of Interest: Australia plus islands
Land Mass Covered: 7,683,406.3 sq km
Time Period: October 1 to December 31, 2017
High-Resolution Satellite Constellation: WorldView-2/3/4
WorldView-2/3/4 Constellation Imaging Statistics–Australia
Total Area Collected: 3,871,996.0 sq km; 14,029.0 sq km per satellite/per day
Area Collected @ 20% or Less Clouds & 30 Degrees or Less Off-Nadir: 2,356,910.3 sq km; 8,539.5 sq km per satellite/per day; 60.9% of total




In these four images of downtown Santiago, you can see a wide array of colors from greens, to reds, to yellows and even oranges! We are particularly fond of the colorful image of the amusement park known as Fantasilandia where you can even see the tracks of the roller coasters. This 30-cm imagery was collected by WorldView-4 on April 13, 2017 and has been processed by Apollo Mapping for improved colors and clarity. (Images Courtesy: © 2018 DigitalGlobe)
Every time we look at WorldView-3 and WorldView-4 (WV3/4) imagery, we are blown away. And we hope you are equally impressed with the data! In February, we featured a rapidly growing Chinese city, and for this WorldView-3/4 Image of the Month we head to the Southern Hemisphere with a look at one of South America’s most modern cities, Santiago, Chile.
PLEASE NOTE: Effective May 2016, WorldView-3/4 prices dropped again! Are you interested in finding out more about these price drops? If so, send us an email at sales@apollomapping.com.
WorldView-3 launched in late 2014 and WorldView-4 launched in late 2016; taken together they are the most advanced satellite constellation the commercial marketplace has ever had access to. Here are a few of the features that really set these satellites apart from the competition:
- Improved Resolution
- Higher resolution means you can see more detail in WV3/4 imagery.
- Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR (WV3 only) and 30-m CAVIS (WV3 only) bands.
- At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
- Per US government regulation, all WV3 SWIR orders are produced at a maximum resolution of 7.5-m. CAVIS bands are not available for purchase at this time.
- Additional Spectral Bands
- If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
- Better Positional Accuracy
- With accuracies of 3.5-m CE90% or better (without ground control even!), WV3/4 has no rivals for its enhanced positional accuracy.
- Daily Revisits
- At 40 degrees latitude, WV3/4 will each be able to image every location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
- Increased Collection Capacity
- WV3/4 feature 13.1-km swath widths (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day per satellite.
- Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.
If you are interested in WorldView-3 and/or WorldView-4 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.
You can also find more WV3 samples and technical information on our website here and then WV4 samples and information can be found here.
The Nicholas U. Mayall Telescope in Arizona is getting an upgrade that will help researchers create the most detailed 3D map of the Universe. The retrofit is for the 9-ton Dark Energy Spectroscopic Instrument (DESI).
Its predecessor, the Baryon Oscillation Spectroscopic Survey (BOSS), is equipped with 1,000 optical fibers. By comparison, DESI is going all in with five times more fibers. The device is comprised of 5,000 fiber-optic sensors, each one the size of a pencil. The fibers are controlled by robots that position the fibers and change the survey area in space. The instrument will stare at one point in the sky, collecting light from distant objects, for 20 minutes before changing its position.
The light captured by the fibers will then be transmitted to ten powerful spectrographs for analysis. Data crunched by the spectrographs will tell researchers how fast objects are moving by analyzing their red shift. More distant objects that are moving away from Earth appear red as the visible wavelength is stretched into the red part of the spectrum. DESI will be able to look as far back as 11 billion years. These are celestial bodies whose light is so far away that it has taken 11 billion years to reach Earth. The red shift tells researchers how fast these objects are moving and therefore the speed of the expansion of the Universe and the effects of dark energy.
Dark energy has never been directly measured, we only know that the Universe continues to expand despite the measured presence of gravity, a force that pulls objects together. We also know that the expansion of the Universe is speeding up, not slowing down. So, if gravity is bringing objects together but the net movement of the Universe as a whole is expanding outwards then there is a force at work that humans have yet to identify. Using fancy math that is over my head, scientists have calculated that roughly 68% of the Universe is comprised of dark energy.
With the help of DESI, researchers hope to unveil some of the mysteries of the Universe. The first measurements are scheduled to take place early in 2019.
Have you checked out the new and improved Image Hunter yet?!?! If not, you should!
Listening to the feedback we received on improving imagery search engines, the new version of Image Hunter features a major overhaul to the user interface as well as to the backend architecture. Image Hunter Version 2 is built on open-source technology so now it works on all computers, not just on Windows machines. We slimmed down the user interface to make it easier to find the imagery filters and other available tools. All things said, we really think you will enjoy your browsing experience with Image Hunter (Version 2).
Key March 2018 Improvement(s)
We have been busy improving Image Hunter for you during the past 30 days, making sure it is the most responsive and comprehensive search engine in the industry! And while the full list of improvements is quite long, here are our personal favorites:
- Press on the layer stack button in the bottom right corner to reveal three new Google Earth layers for your basemap, including roads, topography and even imagery! Pretty cool right?!
- Added the ability to change preview stacking order with the arrows on the right-side of the search results–and if you look in the new Settings menu in the header, you can change how preview stacking works.
- Made sure that coordinates entered to create a polygon are sticky in the Coordinate Entry interface (as long as you allow cookies in your browser).
- Fixed a small bug with the measuring tool and how its results were displayed; as well as a bug with the off-nadir angle of DigitalGlobe images.
- Added the ability to change the color of your area of interest and a button to report bugs in the new Settings menu.
- Squashed a few bugs in the new user interface, particularly for Internet Explorer 11.x.
Data Alert–An Automated Daily Imagery Search
The future is now! We launched our highly anticipated Data Alert service in mid-2015 and it’s a hit! Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once this is set up, we check for new data over your area of interest every single day, and send you an email alert when we find coverage that meets your specifications. We have a short YouTube video with directions to set up a Data Alert, check out the second video. And we have written directions for Data Alert here.
And as you might have seen in past articles, we now feature hourly updates (seriously!) of GeoEye-1, Pléiades 1, SPOT 6/7 and WorldView-1/2/3/4!
Satellites in Image Hunter
Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite imagery on the market today, including:
- Worldview-4
- WorldView-3
- WorldView-2
- WorldView-1
- QuickBird
- GeoEye-1
- IKONOS
- EROS B
- KOMPSAT-3A
- KOMPSAT-3
- KOMPSAT-2
- Pléiades 1 constellation
- Deimos-2
- TripleSat
- Entire SPOT 1 to 7 constellation
- RapidEye
- GaoFen-2
- GaoFen-1
- ZiYuan-3 01/02 (mono and stereo!)
- Formosat-2
- ALOS PRISM (stereo)
Features of Image Hunter
If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide image previews, then Image Hunter is the solution to your woes, as it features:
- Online browsing of satellite imagery from 7 data providers and over 20 satellites.
- Near-instantaneous loading of low resolution preview imagery with collection date, cloud cover and other key metadata.
- The ability to define your area of interest by address and with coordinates, geometric shape or shapefile/KMZ.
- A responsive basemap with street names to provide spatial context when discovering data as well as crowd-sourced updates for the most accurate map possible.
- Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
- Support for all operating systems, and not just our friends with Windows machines!
The new version of Image Hunter can be accessed here. We are excited to find out what you think about Version 2!
If you have any ideas and/or feedback to improve the new Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.
As we mentioned in our Interview Special last month, we here at Apollo Mapping have grown quite a bit recently and are proud to announce the addition of two rock-star coders to our Development Team. Last month’s edition of Map Mavin Methods featured seasoned coder, Tom Vilot, who with three decades of experience under his belt had a good deal to say in response to our questions. This month, however, you will be receiving a more condensed, elevator-speech version of an interview as we sit down with our newest employee, Maddie Abboud. Favoring brevity over bullsh**, we invite you to kick your feet back and enjoy her beautifully succinct and no-nonsense responses to the same questions we asked of Tom. Did she keep it short because she has better things to be working on? Does she just hate me? Or both? We’ll likely never know…. [Answers heavily censored at the behest of our legal team…]
- How and when did you first get into coding?
When I was like 12 because I was bored.
- When did coding become a full-time job for you / where did you first work in a coding role?
My first full time gig was at Windward Studios in 2012.
- Over the years, where have you worked? Any memorable experiences?
Developer at Windward Studios where we did reporting software for 4 years, wrote telemarketing software at Connect First for a year, freelance developer.
- Coming into the world of geospatial science, what’s different about the work you do now than previous roles? What in regards to the work you do with Apollo is particularly exciting and what are some new challenges that are unique to this role?
This question is stupid so I’m not answering it.
(This not-time-for-BS attitude is why we hired Maddie, godspeed you badass)
- Tell us briefly about some forthcoming Map Mavin work you’re excited about.
Rewriting the UI with React instead of this Sencha crap.
- In your life as a seasoned coder, name one particular scenario or thing in general that you love about coding, and one scenario or thing you f***ing absolutely loathe.
I absolutely loathe Brock and his obsession with pixel spacing.
- Outside of work, what do you like to spend your time doing?
Running, video games and programming.
And there you have it folks! Introducing Maddie, a badass coder who works her ass off way too hard to have time for interviews with myself or frankly anyone. We’re glad to have you! ?
Fletcher Berryman
Cloud Tamer
(970) 710-0909
fletcher@apollomapping.com
Last month we checked out the site of a crucial Atlantic Coast Conference men’s basketball conference game, and in March we move to the site of the Big 12 Championship tournament (also for men’s basketball), the Sprint Center in Kansas City, Missouri, for this Pléiades 1–SPOT 6/7 Stadium of the Month.
Name & Its Origin: The Sprint Corporation won the naming rights to this stadium in late July 2004 even before the voters eventually approved partial municipal funding to build the Sprint Center. The deal was a 25-year agreement worth $62.5 million.

A 50-cm color image of the Sprint Center in Kansas City, Missouri, USA collected on September 28, 2017 by Pléiades 1B; and then a 1.5-m SPOT 6 image of the same stadium collected on November 19, 2017. These images have custom processing and color balancing applied by Apollo Mapping. PLEIADES © CNES 2018, Distribution Airbus DS. SPOT © Airbus DS 2018.Location: Located in the Power and Light District of Kansas City, Missouri, the Sprint Center is about 1 mile (1.8 kilometers) from the Missouri River at 860 feet (262 meters) above sea level.
Stadium Capacity/Size, Architect & Build Date: Ground broke for the Sprint Center on June 24, 2005 and its doors opened about two years later for general public tours on October 10, 2007. The $198 million, ~19,000-seat (it can change configurations and therefore seating capacity) stadium was designed by a consortium, the Downtown Arena Design Team, and its construction was managed by M.A. Mortenson. Check out this cool time-lapse video of the construction of the Sprint Center.
Type of Field Surface: Unfortunately there were no details on the hardwood floor installed in the Sprint Center.
Key Sports Teams: When the Sprint Center was built, many local citizens thought that a pro NBA or NHL team would soon call the arena home–but this never happened. As such, the biggest sporting event of the year is clearly the men’s basketball Big 12 Championship tournament which year after year draws the largest average attendance of any conference championship tournament.
Most Popular Yearly Event: Without a major sports team, the Sprint Center has had to turn to other forms of entertainment to put cheering fans in the seats, and frankly the lineup is impressive! In 2017 alone, the stadium hosted a wide range of music acts, from Ariana Grande to Iron Maiden to Kendrick Lamar to Lady Gaga; as well as preseason NBA and NHL games and the NCAA Women’s Volleyball Final Four.
Fun Factoids: (1) The 2018 Big 12 Men’s Championship tournament will be held at the Sprint Center from March 7 to 10 and this year’s edition is sure to be one of the most watched tournaments given the overall strength of the conference. (2) According to this research, the Sprint Center contributed more than $213 million to the local economy in its first five years of operation. (3) When Green Day played at the Sprint Center on August 11, 2017, the guitar player pulled a young fan on to stage to sing along with the band.
The Pléiades 1 High-Resolution Satellite Constellation
The Pléiades 1 constellation (or at least part of it!) has been in orbit since December 2011 and if you have not had a chance to check out any sample imagery, take a few moments and have a look at the gallery on our website. If you work with high-resolution imagery, you should consider Pléiades 1 for your next geospatial project.
A variety of Pléiades 1 products are available from both a growing archive and as a new collection, including 50-centimeter (cm) pansharpened imagery and 50-cm panchromatic–2-meter (m) 4-band multispectral bundles. We are happy to discuss the technical specifications, pricing and tasking options available with this satellite constellation.
The SPOT Medium-Resolution Satellite Constellation
The SPOT medium-resolution constellation consist of seven satellites launched from 1986 to 2014 with the most recent additions, SPOT 6 and SPOT 7, launching in 2012 and 2014 respectively. SPOT 6 and SPOT 7 are twin satellites offering 1.5-m panchromatic and 6-m 4-band multispectral data with a massive footprint at 60-kilometers (km) wide. For projects requiring recent archive coverage or rapid new collections of medium-resolution data, SPOT 6/7 should be one of your top imagery sources!
More sample images and technical information about Pléiades 1A and 1B can be found on our website here; while the same can be found here for the SPOT constellation and specifically about SPOT 6/7.
The Apollo Mapping sales team can answer any questions you might have about Pléiades 1 and/or any of the SPOT satellites. We can be reached at (303) 993-3863 or sales@apollomapping.com.
The past few months have been full of product updates, price changes and new satellite in Image Hunter. So if you missed any of our recent newsletters, here is a summary of some of the changes:
- We added a new stereo satellite, ALOS PRSIM, to Image Hunter and redesigned the front-end user interface.
- There is a new larger minimum order for medium-resolution imagery from PlanetScope and RapidEye.
- Product delivery options for IKONOS changed in January.
- And finally, prices for Airbus imagery and elevation models have increased.




