In this monthly feature, we span the globe to examine Our Changing Landscape with a time series of medium-resolution PlanetScope satellite imagery. The PlanetScope constellation dates back to 2016 and collects hundreds of millions of square kilometers of four and five-band 3-meter imagery daily! Last month we checked out the destruction left behind by a tornado in the United States, and for the July 2021 edition of Our Changing Landscape we shift our focus to international geopolitics with a look at Fiery Cross Reef in the South China Sea.


Click on the image above to see an animation of 3-meter natural color PlanetScope imagery collected over Fiery Cross on April 6, 16 and 28 and May 1, 2021. We had hoped to see significant changes in these images when it came to shipping traffic in and out of the port, but unfortunately that did not work out. Here are the observations we can offer about this layer stack. First there is a boat patrolling the inner harbor area of Fiery Cross which is in a different position in each image, so if there had been traffic coming in and out of the port, we would have seen it with 3-meter PlanetScope data. Second, there is significant environmental damage done to the reefs surrounding Fiery Cross including a large dredged channel into the main harbor. And finally, even in a remote location such as the middle of the Pacific Ocean, the 3-meter PlanetScope archive is extremely robust and could help monitor shipping traffic to and from remote port locations. (Images Courtesy: © Planet 2021)

The PlanetScope Microsat Constellation

PlanetScope is a constellation of more than 150 microsats referred to individually as Doves. Each Dove is able to collect up to 20,000 square kilometers (sq km) per day of 3-meter (m) 4-band multispectral (i.e. blue, green, red and near-infrared [NIR]) imagery; and newly launched SuperDoves collect 5-band multispectral adding in valuable red-edge spectral data. Across the constellation, PlanetScope is archiving more than 200 million sq km of medium-resolution imagery a day, making it the go to source for daily imagery over most locations. This massive archive dates back to 2016, offering the most complete and continuous record of spatial data on the planet since the start of the constellation’s ongoing launch schedule. Collecting 3-meter multispectral imagery is the equivalent of ‘high-resolution’ multispectral data imaged by a 75-centimer (cm) satellite (as this satellite would feature 75-cm panchromatic and 3-m multispectral), making PlanetScope an extremely competitively priced option at just $1.80 per sq km. With well registered images and nearly daily collections of most locations, PlanetScope is the ideal imagery source for this current-events focused series, Our Changing Landscape.

April and May 2021 Maritime Traffic To/From Fiery Cross Reef

Fiery Cross Reef is a tiny reef on the southern side of the South China Sea first named in 1860 when a British shipping boat wrecked there. In a remote South China Sea location, Fiery Cross is actually nearly equidistant and closest to Vietnam’s coast to the west, and then Palawan Island in the Philippines to the east, at about 300 miles or 482 kilometers. However, and this is where the story gets interesting, the tiny reef is part of a zone called the 9-Dash Line that has its roots in the end of World War II. In 1947, China published a map depicting a wide sweeping region of the South China Sea where it planned to exert military power as a sort of defensive buffer zone.

This exercise of power is essentially a take over of small remote islands and/or reefs plus the creation of artificial islands in the South China Sea whereby China builds military bases and sometimes agricultural zones. According to the Asia Maritime Transparency Initiative, Fiery Cross Reef was converted into a Chinese military base mostly during 2017. The disputed take-over of Fiery Cross includes a sprawling air force base and radar installations that cover about 27 acres or 110,000 square meters. International stories have noted maritime activity around many of the disputed lands, including at Fiery Cross. This fact combined with our recent success at detecting shipping vessel by the Suez Canal with 3-meter PlanetScope imagery, it seemed like an intriguing idea to look at the area around Fiery Cross Reef to see if we could detect any maritime activity in the past few month

If you would like to find out more about using 3-meter PlanetScope imagery for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.

Google Earth is an accessible and easy to use program utilized by people around the world. Its popularity has made Google Earth an essential tool for viewing, creating and editing geographic information. Collaborating with people who don’t have expensive software or robust training makes Google Earth a workhorse amongst GIS programs. But what do you do when it’s time to bring that information into a GIS program like QGIS, ArcGIS or GRASS GIS? KMLs and KMZs allow users to create points, lines and polygons in a single file, but shapefiles are more stringent and only allow for one shape-type in each SHP. This is where our free kmz2shp.com conversion website shines! Our easy-to-use interface allows you to convert those integral KML/KMZ files into shapefiles–even ones with points, line and polygons combined in a single file. So, in a matter of seconds, your complex KML and KMZ files will transform into shapefiles you can open in any GIS.

Working with your teammates, clients and other stakeholders shouldn’t be difficult. There’s no need to get caught up on file conversions when you have kmz2shp.com to use for free!

Here are a few of the features that make kmz2shp.com superior to other GIS conversion websites out there:

  • Our website is 100% free as long as your uploaded file is below 10MB. And you can convert as many files as you like per day.
  • We do not gather any contact information, email, etc. to convert shapefiles, KMLs, KMZs and GeoJSONs.
  • We built this website on Google AMP so it loads nearly instantly in Chrome.
  • You can convert point, line and polygon files on kmz2shp.com–in fact, we even have a way to convert mixed geometry KMZ files.
  • Oh and did we mention the website is 100% free?! 😊

We hope you find our website, kmz2shp.com, helpful and it saves you the extra step of going to Image Hunter each time you want to convert between a GIS file format.



SEG Plaza is currently the 18th tallest structure in Shenzhen at 957 feet (291.6 meters) tall and some 71 stories above ground. Completed in 2000, this octagonal building was likely not known to many folks outside of its home city until videos captured it swaying back and forth on May 21, 2021. There were no recorded earthquakes in the area that day and the weather was relatively calm; and till now the cause(s) of this very scary incident are still unknown. The other two images here are of interesting locations in the surrounding town of Shenzhen, China. This 30-cm WorldView-3 imagery was collected on November 24, 2020 and has been processed by Apollo Mapping for improved clarity and colors. (Satellite Imagery © 2021 Maxar Technologies)

Every time we look at WorldView-3 and WorldView-4 (WV3/4) imagery, we are blown away. And we hope you are equally impressed with the data! Last month we checked out a city enclosed by a star fort in western Spain, and for this August edition of the 30-cm Color WorldView-3/4 Image of the Month we travel to China to the site of a building, SEG Plaza in Shenzhen, that set Twitter afire as it literally swayed back and forth on a clear day.

WorldView-3 launched in late 2014 and WorldView-4 launched in late 2016; taken together they are the most advanced satellite constellation the commercial marketplace has ever had access to. Here are a few of the features that really set these satellites apart from the competition:

  • Improved Resolution
    • Higher resolution means you can see more detail in WV3/4 imagery.
    • Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR (WV3 only) and 30-m CAVIS (WV3 only) bands.
    • At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
  • Additional Spectral Bands
    • If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
  • Better Positional Accuracy
    • With accuracies of 3.5-m CE90% or better (without ground control even!), WV3/4 has no rivals for its enhanced positional accuracy.
  • Daily Revisits
    • At 40 degrees latitude, WV3 is able to image every location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
    • WV4 is no longer collecting new imagery.
  • Increased Collection Capacity
    • WV3/4 feature 13.1-km swath widths (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day per satellite (though WV4 is dead now).
    • Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.

If you are interested in WorldView-3 and/or WorldView-4 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.

You can also find more WV3 samples and technical information on our website here and then WV4 samples and information can be found here.

If you are searching for medium and high-resolution satellite imagery, the search is over as Image Hunter is the solution you’ve been looking for! Featuring satellite and aerial imagery as well as digital elevation models (DEMs) from a constantly expanding list of 54 sensors/datasets and 19 vendors, our database contains more than 115-million images/records meaning there is just no other website out there with this breadth of commercial data products. Our interface is slim-lined and modern, loading quickly on all platforms, browsers and operating systems. Further, our database is updated multiple times an hour with the most recent images collected by WorldView-3, Pléiades 1, PlanetScope, SuperView-1 and many more so you are sure to get the most current view of all the imagery and DEM databases we work with. Once you submit your request, an Apollo Mapping representative will be in touch within 4 Colorado business hours to get you the pricing information you need for your project.

So why wait? Give Image Hunter a try now to find the imagery and/or DEM data you need for your next mapping project!

Key July 2021 Improvement(s)

While we continue to work on replacing code libraries with newer versions, in the past month we pushed a series of bug fixes to Image Hunter! Our personal favorite is the new sorting of results in persistent hyperlinks so that selected images now appear at the top of the list.

Here is a summary of the changes/improvements we made to Image Hunter during the past month:

  • Replaced Airbus catalogue IDs with parent IDs for more consistency with the Geostore.
  • Selected images will now appear at the top of search results in persistent URLs.
  • Standardized GaoFen-1/2 resolutions and catalogue IDs in the search results and info modal.
  • Fixed missing previews in the Review/Save menu for SPOT 6/7 imagery.
  • Added an indicator for stereo in submission emails.
  • Corrected the resolution of Formosat-2 multispectral images to 8-meters.

Data Alert–An Automated Daily Imagery Search

Have you checked out Data Alert which lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active? Once an alert is set up, we check for new data over your area of interest every single day, and send you an email when we find coverage that meets your specifications. We have a short YouTube video with directions to set up a Data Alert, check out the last video; and we have written directions for Data Alert here.

The Sensors Available in Image Hunter

As you might have seen in past articles, we now feature hourly updates (seriously!) of GaoFen 1/2, GeoEye-1, KOMPSAT 2/3/3A, Pléiades 1, SPOT 6/7, SuperView-1, TripleSAT, WorldView-1/2/3/4 and ZiYuan-3!

Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite (and aerial!) imagery on the market today, including:

  • WorldView-4
  • WorldView-3
  • WorldView-2
  • WorldView-1
  • QuickBird
  • GeoEye-1
  • IKONOS
  • EROS B
  • KOMPSAT-3A
  • KOMPSAT-3
  • KOMPSAT-2
  • Pléiades 1 constellation
  • Deimos-1
  • Deimos-2
  • TripleSat
  • SPOT 1 to 7 constellation
  • RapidEye
  • GaoFen-2
  • GaoFen-1
  • ZiYuan-3 01/02 (mono and stereo!)
  • FORMOSAT-5
  • FORMOSAT-2
  • ALOS PRISM (stereo)
  • AW3D Standard (DEM)
  • SkySat constellation
  • PlanetScope constellation (including 5-band SuperDove data)
  • SuperView-1 constellation
  • Landsat 1-8
  • TeLEOS-1
  • Hexagon (HxGN Content Program aerial imagery)
  • WorldDEM
  • Vricon DEMs
  • Orbita Hyperspectral Satellite (OHS)
  • KazEOSat-1
  • KazEOSat-2
  • Jilin-1 Optical
  • Jilin-1 Video (including nighttime imagery)
  • Jilin-1 GF
  • Jillin-1 KF
  • Orbita Video Satellites-1/2/3 (OVS-1/2/3)
  • BlackSky Global series

Key Features of Image Hunter

If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide image previews, then Image Hunter is the solution to your woes as it features:

  • Online browsing of satellite and aerial imagery from 19 data providers and 54 satellite and aerial imagery derived datasets.
  • Near-instantaneous loading of low-resolution preview imagery with collection date, cloud cover and other key metadata.
  • The ability to define your area of interest by address, coordinates, geometric shape or shapefile/KMZ.
  • A responsive basemap with street names to provide spatial context when discovering data as well as crowd-sourced updates for the most accurate map possible.
  • Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
  • Support for all operating systems, and not just our friends with Windows machines!

Image Hunter can be accessed here all day and night, we are excited to find out what you think about our imagery search engine! So if you have any ideas and/or feedback to improve Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.

I’ve been to Portland, Oregon, more times than any other city in the country (visiting my hometown aside; New Orleans is a close runner-up). I first visited during August of 2001, very shortly after I moved to Boulder, Colorado (for the first time). In fact, I’d only been in Colorado a couple weeks and had just secured a job there, but my best friend was just a few weeks behind me moving to Oregon and I was excited to go check it out once he arrived. I asked my boss if I could postpone my start date and he said, “No.” So, I quit.

That wasn’t the original sign of a poor commitment to careerism, but the first after completing college. Needless to say, I didn’t care then, and I don’t care now. Anyways, back to the story. I drove out to the West Coast in one sitting, a 17-hour drive if I remember correctly, and I arrived at the squalor my friend was living in with another buddy from high school. They were dirt poor and didn’t have much; there were two camping chairs for “furniture” and a big cardboard box turned upside down for a “table.” They lived in one of the seedier neighborhoods of Portland–before it got uber-gentrified and all the monied bourgeoisie liberals started relocating there–and crime was pretty common around his domicile. In fact, over the course of his first three years in Portland, he had three cars stolen. Two were from stolen from that parking lot, which we’ll get to momentarily, but the second of three was stolen on the side of a highway. He bought a pickup truck for $50 and it broke down a few miles away from the “dealership” on the side of the road, so he left it there and hitched a ride home. Once his roommate was able to, they went back to try and jump it or figure out what was wrong, but it had been stolen. The first to get yanked was an old beat-up VW hippy bus. I don’t think that one ever turned up again either. The third was a fairly decent SUV with all of his laundry in it. This guy isn’t the type to do a load every week, and since they neither had a unit in their apartment nor on the premises, it backed up even more. Apparently, and not surprisingly, when his truck was stolen it had 90% of his clothes in it. Fortunately, they found it. But when they did, a few days later, there were only two types of things missing: his CD wallets and his Tupperware containers. The CDs and clothes were still there. Either they were some thoughtful thieves or that just tells you a lot about his taste in clothes and music. Eventually, he got his act together, saved some money, and moved into a nicer part of town; then he didn’t have many more problems as a victim of crime…

Yeah, some idiots tried to destroy this iconic sign during the protests and riots of 2020. (Image retrieved from https://unsplash.com/photos/RLTxWld28ls, courtesy of Trang Nguyen)

I’m not sure if you’ve ever seen the old IFC show, Portlandia, but the very first episode (and really, most of the early ones) are spot on about what that place is like. In that series debut they sing a song about Portland where the chorus line is, “The dream of the 90s is alive in Portland.” Leading up to the song the actors, Fred Armisen and Carrie Brownstein, are chatting about his recent trip there comparing it to contemporary Portland as being the state of the nation, and Generation X, in the 90s. A place where people are “content to be unambitious,” the “city where young people go to retire.” It was all true back then, it’s only gotten worse.

The city and its residents are everything bad about the Left, woke culture run amok. Everyone is aggrieved and offended by everything. If you don’t cop to your trespasses and your contributions to oppression, capitalism, and the rainbow of schisms, well, you’ll be publicly flogged. The city’s people are the worst of the worst of the worst these days. Sad but true. That’s not to say that it doesn’t have some redeeming qualities, though. Obviously, the city is beautiful, there is abundant outdoor recreation, short drives to the ocean and mountain, a great music scene and art, an unbelievably diverse food culture, and if you don’t mind some gray and wet winters, the climate is pretty nice (occasional bursts of sweltering hot summers aside–but that’s the fault of climate change and all of us energy guzzlers). There are even some really cool people there, you just have to filter your way through the baby-wearers, little dog carriers, trustafarians (trust fund kids who LARP homelessness), crybabies, and “causeheads” (slight tangent: if you don’t know that phrase, pick up the movie PCU with David Spade and Jeremy Piven. It was released in the early 90s and was a flop in the theaters but amassed a quick cult following through frequent airings on Comedy Central starting a year or two after its release. In a nutshell, the movie centers on the overly politically correct nature of a liberal arts campus during the course of one day on campus; a perfect day-in-the-life movie, a la Dazed & Confused. I watched it with a much younger friend recently who lives in Portland, and she was shocked how old the movie is because of how relevant it is today).

I used to say about Boulder, Colorado that it was a place where people try to be weird for the sake of being weird. I think in Portland many people are authentically weird, which is admittedly endearing. My friend and his wife now live in Beaverton, the first suburb southwest of Portland. It’s only about a 20–25-minute drive depending on where you’re going, and you can get there on their light rail system, “the Max,” quite easily, too. But as all suburban life goes, it leaves you wanting. So, while it’s easy to bitch about all the horrible aspects of life in Portland (PDX from now on), to do so when you live in a ‘burb kind of denies you the right–the whole not throwing stones thing. In fact, as much as I like to trash PDX, “the Beav” has earned its smack talk, too. The place that I affectionately refer to as “East of the Coast,” and whose unofficial motto I dis-affectionately claim is, “It ain’t great,” really has all the little brother trappings of a stone’s throw away suburb from a big city. In the spirit of Portlandia I also call it Beavertonkia–this is based off a license plate bracket I used to see all the time: the Beaverton Kia dealer didn’t do a good job of proofreading their brackets they had made and decided to still use them, slapping them on every car they sold, even though the two words were run together as one. If PDX is the place where it’s cool to be weird, then Beavertonkia is the place where those who can’t cut it being weird move to with their tails tucked between their legs.

I claim I lived in “Portland” (really, I was in the Beav) for a few spells. I spent two summers there, about two months each during 2012 and 2013, and then for about seven months between 2015-2016 while I was trying to get my life in order (again). One friend told me that if I didn’t reside somewhere for at least a year then I didn’t really “live” there. I disagree. Maybe those two summers don’t count because I just pressed pause on my normal, day-to-day life, but that larger chunk saw me giving up a lease, loading up a huge storage unit, and packing my car with the bare essentials. I moved, buddy. During those runs, as well as the other 15-20 times I’ve visited, I spent a lot of time in PDX, so I think I’ve earned the right to trash it. In terms of all the places I’ve lived, and despite what my statements about it would seem, it stands near the top of the favorites, though that may be because those at the bottom were so miserable, at least they were at the time I was living there. In actuality, no place I’ve lived has been that bad upon reflection, but most of them I have no desire to live in again, and only a few of them I would actually want to visit again, PDX being one. Though, that has a lot to do with the number of friends I have there, so if some move away or I start to lose touch with others, then it might fall to the bottom as well. For now, we’ll just leave it at the fact that I think there is a lot wrong with the place–mostly because of the people, but there is a lot that is salvageable, too. I hope…

I have another friend in PDX who works for the parks department (in fact, the gal I watched PCU with, mentioned above). She started out as a lowly scrub and is starting to work her way up. Some of her early duties were picking up the parks and around other public spaces–for a city that claims to be so progressive and environmentally conscious, they sure do litter a lot. This has a lot to do with the massive problem regarding homelessness–part housing prices, part city policies, part culture, part who the f*^k knows–but she was cleaning up after one of the protests during the summer of 2020 and had a pig’s blood thrown on her, trash dumped on her, had to cover up tattoos and wear a wig because people were stalking city employees, and was repeatedly cussed at and chastised for “working for the man” as she cleaned up the areas where these people socialized, protested, rioted, and lived–and trashed. She was getting trashed for picking up theirs. That’s Portland for you: a clusterf*^k off idiots and a$$holes who have a whole lot to say and not a whole lot of action to back it up. The kind of people who would just assume tell you what they think and what you should do but have no intent of hearing your position. The type of people who are talking heads spewing talking points from the woke bible without any ability to critically think for themselves. And then you have the beautiful parts. That city is Dr. Jekyll and Mr. Hyde if there ever was one, and I hope it can be saved from its current inhabitants…

Marco Esquandoles
Tellin’ You How it is Since the Beginning


Click on the image above to see an animated views comparing 2.5-m and 5-m AW3D DEMs over Boston, Massachusetts and Washington, D.C. (C)NTT DATA, RESTEC, Included JAXA

In conjunction with our valued partner, NTT DATA, we are proud to offer 2.5-meter/5-meter (m) AW3D Standard DEM products from an archive covering more than 80% of the world. As an added bonus, you are able to search for AW3D Standard in Image Hunter, making this DEM fast to query, order and deliver.

Produced from an archive of more than 3 million ALOS stereo images, AW3D Standard can be delivered as either a digital surface model (DSM) or a digital terrain model (DTM) at 2.5-m and 5-m resolutions. With average delivery times of 2 weeks or less for a DSM (or 4 weeks for a DTM), AW3D is an excellent choice for regional projects requiring quick turnarounds on high-resolution DEM data.

Here is a summary of the current AW3D Standard specifications which should be updated when more testing is completed on the 2.5-m DEM offering:

Resolution: 2.5-m (also offered at 5-m for a reduced price)
Date of ALOS Images Used: 2006 to 2011
Horizontal and Vertical Accuracy: 5-m LC90 and LE90, or better
Product Levels: level 1 DSM (raw data); level 2 DSM (voids infilled); level 2 DSM (standard); level 3 DTM
Average Delivery Time: 2 to 4 weeks

If you have any pricing requests or additional questions about AW3D Standard DEMs, send us an email at sales@apollomapping.com.

The temperature departure map for the month of May 2021 shows pockets of record warmth in the Middle East and eastern Asia–and something we do not see often, some record cold over central India.
  • According to the May 2021 NOAA global climate report, May was a pretty warm month at some 1.46°F (0.81°C) above the 20th Century average–representing the 45th May in a row with above average temperatures and also the 6th warmest May on record. Some 3% of the world’s land mass saw record warmth in the month which was the tenth highest percentage for May.
  • July 7th is World Chocolate Day, soooo yummy! So in honor of this delectable holiday, our Google search of the month was, “Chocolate and GIS.” If you look through the results you might find this Master’s thesis by Lilian Lartey of Penn State University whereby she uses GIS and six environmental factors to map the prevalence of Cocoa Swollen Shoot Virus as well as to predict the location of future outbreaks.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

We live in a side-gig culture, but who would have thought hunting for planets was a viable hobby? Two gas giants were recently discovered thanks to citizen scientists as part of a crowdsourcing project. The planets orbit a star 352 light-years from Earth, with a similar mass as the Sun but 1.5 times larger. Both planets are gas giants and orbit close to the star. The planet closest to the star, named HD 152843b is three and a half times larger than Earth and orbits the star every 12 days. Its pair, named 152843c, is over five time larger than Earth and has an orbital period between 19 and 35 days. The known planets orbiting the star demonstrate the unique differences between solar systems, and also how they form and evolve.

Artist’s depiction of the two gas giants orbiting the star HD 152843, 352 light-years from Earth. (Credits: NASA/Scott Wiessinger)

The Planet Hunters TESS project utilized data from the Transiting Exoplanet Survey Satellite (TESS) through the Zooniverse platform to find the gas giants. Citizen scientists dug through thousands of subjects to identify possible transits. A transit is anytime a planet passes between its host star and Earth, when light is blocked for a brief time as it crosses the line of sight. It’s easy to see how this could lead to many false positives. There are countless reasons why light may be blocked from a star somewhere along the line, so citizen scientists were looking for a measurable pattern. Planetary orbits are relatively fixed and a dip every 12 days is a good indicator that an object is orbiting a star at a fixed rate. With two planets, the transits may look irregular, but with enough data points, the pattern emerges.

After identifying the planets on Planet Hunter, the science team ruled out external anomalies like interference from the TESS instrument or other astrophysical events, such as two stars orbiting each other. It was then confirmed by astronomers using the Extreme Precision Spectrometer at Lowell Observatory in Arizona and the High Accuracy Radial Velocity Planet Searcher for the Northern hemisphere at the Telescopio Nazionale Galileo in Spain to measure the planets’ masses using radial velocity. While a star has a large mass, the gravitational pull of the planets causes the star to wobble or be pulled off center as it’s jostled around. This wobble was measured and the mass of the two planets identified, confirming their status as exoplanets.

Two gaseous planets orbiting a star 352 light-years away is an exciting find. Despite the perceived distance, it’s close enough for ground-based systems to study and astronomers to delve into their atmospheric and chemical compositions. Once the Webb Space Telescope is in orbit, we’ll see these planets in greater detail. You never know what you can find with a passion for science, but in this case it’s two (new to us) planets.