Doesn’t that really get your goat?

I never really understood that phrase, so I decided to inquire about its origins. As many of these dated sayings go, there are numerous stories attributed to their debut, but the one I found most appealing was that of the goat’s friendliness with its fellow stable buddy, the horse. As the legend goes, goats were kept in stables with racehorses to help keep them calm. Being that owners, trainers and jockeys wanted their steed relaxed and ready to run for the derby, goats were found to provide a soothing environment for the ever-social being, the horse. When someone wanted to try and fix a race or put some bad voodoo on another rider, they would steal the goat. As in, I “got your goat.” And no story would be complete about goats unless we were to mention the curse of the Billy Goat. In 1945, Billy Goat Tavern owner Billy Sianis was asked to leave the World Series game between the Cubs and the Detroit Tigers because his pet goat’s odor was bothering the fans. Sianis was outraged and allegedly said the Cubs would never win another World Series pennant again, and true to form, they have not.

The peaceful shores of Lake Monona in Wisconsin use a more common form of landscaping than the Island of Monona. Image captured by the 50-cm satellite WorldView-2 (WV2) on August 16, 2013, and appears courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.
The urban and rural components of Dane County, Wisconsin appear from above as any normal municipality would. But what takes place in that auditorium? That’s where the goats are trained for combating weeds! Image captured by WV2 on August 16, 2013, and appears courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

But goats aren’t all bad, are they? Naaaaa.  An acre-wide island in Lake Monona, Wisconsin has found good use for goats. Over the years the island has become covered with weeds and non-native tree species, but the HOA affiliated with its management was hesitant to use chemicals and found that people power was no match for the buckthorn and honeysuckle. So after hearing about a woman named Kim Hunter of Green Goats, the residents decided to employ her herd of 102 Spanish goats to curb their gardening woes. The goats are very effective because of their voracious appetites, and they are cheaper than human labor. It has also been found that they are quite the attraction for locals. Green Goats operates out of southern Wisconsin, and they have been employed all over the region, including at a disc golf course in Naperville, Illinois.

But this isn’t just a heartland solution. Over the summer the US Forest Service employed goats in the Cleveland National Forest near San Diego. Over 1,400 goats were used to remove the build-up of fuel (fallen trees and timber) to help create fire breaks with the hopes of preventing wildfires. The ultimate goal is to save two local communities from the inevitable future fire. But just as the USFS is employing this tactic in one region, it is not entirely happy about its use elsewhere. In Utah, federal agents have fought the introduction of a non-native Rocky Mountain goat species to the Manti-La Sal National Forest. State officials see the introduction as a boon because it will boost sales of tags for trophy hunters; but the fragile ecosystem boasts 10 rare plant species that grow nowhere else in Utah, and the worry is that these goats will do just as their nature intends. In one place the goats are in demand, and in another they are not.

But goats are catching on at the personal level too. Not only do they mind the garden and save your back from the pains of weeding, they provide dairy products like milk and cheese. They also produce wool, and if you have the right kind of goats, the very luxurious and highly sought after cashmere. Goats have become ever more popular with the boom in community gardening. Much as their chicken counterparts who produce protein-rich eggs, sustainable communities are finding benefit in having livestock on their property to ease financial burdens and provide some ‘life’ to their yards. Who knew goats could be so diverse and so divisive? While it is best to not introduce non-native species of any kind to an area, their use for culling wild plants gone awry in a green fashion is certainly something that should be considered to save energy, and maintain local species diversity.

Justin Harmon
Staff Writer

In a study about forecasting crime patterns, researchers at Rutgers University set out to devise risk terrain maps for gang behavior and shootings to see if they could estimate the likelihood of future criminal activities. Using risk terrain modeling, they applied their model to two six-month periods for a comparison of hot-spots based on past crimes data. The authors argue that current systems of spatially-based policing may be outdated because they operate on the premise that new crimes will predominately occur where older crimes have already taken place. Through the analysis of shootings in urban New Jersey, the authors seek to consider crimes as a hazard that can be evaluated through risk assessment.

Risk terrain and shooting overlay.

Past research has suggested that variations in crime are explained by opportunities to commit crimes; however the ability to operationalize ‘opportunity’ has been an ongoing issue. Using risk terrain modeling (RTM), it functions similarly to the offender-base risk assessment model, in that it allows for offender characteristics to be incorporated into a scale of risk, such as re-arrest, absconcion while on bail or violation of parole. However, the RTM approach goes beyond this tactic to include professional experiences of police, practitioner knowledge such as parole officers and bondsmen, compiled literature on offender patterns and other empirical methods to feed their model.

Hot-spot mapping is the default for police agencies across the board, though the authors believe that this base data can be greatly improved upon with the use of multivariate methods and raster data. Working with the New Jersey state police, the researchers mapped out an area of 2.8 square miles in Irvington, NJ, an urban community with a population of 65,000 people. Murder rates for this area in 2007 were 38.7 per 100,000, as compared to the national average of 4.9 per 100,000 people. The town has seen an influx of drug organizations and has a high gang population.

Clustering of top 10% high-risk locations in risk terrains during both periods of evaluation.

Being that shootings are a relatively infrequent type of crime in general, yet frequent in this area, the authors operationalized three variables they felt would help predict them. They were: the dwellings of the known gang members (722); locations of retail business infrastructure (108); and location of drug arrests (496). While these were not deemed the only worthwhile variables to consider, based on existing data, they were the most effective data points for their model.

Through their creation of risk terrains, the authors felt that they had created a reliable predictor for future crime, but also stressed that the model does not indeed guarantee crime. Future follow-up studies based on the model and study area will be able to speak to the validity of their prognosis, but the model as a tool for law enforcement has great potential to use the limited resources in the most effective manner.

Justin Harmon
Staff Writer

For the past two and a half years, Astrium GEO’s twin high-resolution radar satellites, TerraSar-X and TanDEM-X, have imaged the entire land surface of our planet multiple times to create the first ever 12-meter (m) global elevation model, the WorldDEM. Expected to be ready for commercial sales by mid-2014, Apollo Mapping is happy to announce that 12-m WorldDEM samples are ready for download over three locations.

A comparison of two DSMs: first a 30-meter (i.e. free ASTER GDEM resolution) layer; and second a 12-meter WorldDEM layer.

The key specifications of Astrium’s WorldDEM are as follows:

  • Resolution: 12-m
  • Vertical Accuracy: 2-m (relative), 10-m (absolute)
  • Format: digital surface models (DSM) & digital terrain models (DTM)
  • Vintage: all data collected within 2.5-years
  • Source: synthetic aperture radar (SAR) satellites TerraSAR-X & TanDEM-X

You can download the three 12-m WorldDEM samples here:

For more information on 12-m WorldDEM data, please send us an email at sales@apollomapping.com.



The destruction and human suffering left in the wake of Typhoon Haiyan is stark and tragic. Slamming into southern Philippines with winds recorded at 194 miles per hour and a storm surge approximately 17-feet tall, Haiyan laid waste to nearly everything in its path. One of the hardest hit cities was the regional capital on the island of Leyte, Tacloban, with a population of 215,000+. At the time this article was written, Haiyan had been blamed for nearly 4,000 deaths with more than 1,600 still officially missing.

Just several days after the landfall of Haiyan on November 7, 2013 over the Philippines, the ~70-cm panchromatic satellite, EROS B, collected low cloud-cover imagery over the most devastated areas of Tacloban. ImageSat, the owners of EROS B, shared this data with us and our readers of The Geospatial Times. As there was no pre-typhoon EROS B imagery available, we selected three areas with extreme damage to feature in this short piece.

Each of these images were collected on November 13, 2013 at 68-cm resolution. We enhanced each to make them as crisp as possible. In the first image, you can see three large ships (each well over 20-meters long) that were washed ashore on the north end of the beach. You can also see that the vast majority of standing structures were wiped out by the storm surge.

In this second image, you can also see the extreme devastation of the smaller structures and even the massive structure in the center had a large section of its roof ripped off.

In the final image, you can see a massive amount of debris and rubble left along the center of the coastline.

If you would like more information on the panchromatic satellite EROS B, you can refer to our website here or send an email to sales@apollomapping.com.

In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a specific geography during a three month window. To do this, we pick a high resolution satellite, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.

This map shows the areas imaged by Pléiades 1 from July 1 to September 30, 2013 over China (in beige). Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.

Graphic Region of Interest: China

Land Mass Covered: 9,385,512.2 sq km

Time Period: July 1 to September 30, 2013

High Resolution Satellite: Pléiades 1

China Pléiades 1 Imaging Statistics

Total Area Collected: 5,527,948.7 sq km; 60,086.4 sq km per day

Area Collected @ 20% or Less Clouds & 30 Degrees Off-Nadir: 2,743,095.0 sq km; 29,816.2 sq km per day; 49.6% of total

If you are working in a cloudy region and need elevation data sooner than later, Elevation10 is the product for you. Created from radar satellite imagery which is not impacted by cloud cover, these elevation models can often be delivered within a month from the start of tasking.

A map of the archived Elevation10 data centered on south-east Asia where the bulk of it exists. Areas with coverage are shown in green.

And given that radar is an active sensor, no ground control points are required to achieve digital elevation models with 10-meter (m) resolution as well as 10-m vertical and horizontal accuracy. This is a huge advantage as it reduces turnaround time and eliminates the need for site access.

Elevation 10 Product Updates

(1)  Elevation10 does have a limited archive you can order from which will reduce delivery timelines even more. Here is a summary of the archive coverage by country/continent:

  • Algeria–900 square kilometers (sq km)
  • Antarctica–2,178 sq km
  • Chile–230 sq km
  • Indonesia–702,853 sq km
  • Iran–182 sq km
  • Malaysia–24,033 sq km

(2)  In the past several months, pricing for the digital terrain model (DTM) and digital surface model (DSM) products have dropped. If you have a pricing request, send it along to the Apollo Mapping sales team at sales@apollomapping.com.

For information about Elevation10 specs, data sources and more, please refer to this month’s featured product article.

  • Every now and then I get overwhelmed by a selection of great technology articles that really have no consistent theme. So this month I feature a smorgasbord of interesting finds I made over the past few months.Have you ever wondered why some people are ignored by mosquitoes and others are constantly bitten, this research suggests it could be due to microbes. And here is an idea to track malaria, a deadly disease spread by mosquitoes, with cell phones.

    There is a new lightest material in the world, aerographite, replacing the old champion, graphene. But fear not graphene as scientists are finding new uses for you constantly, such as cooling electronics and a stretchable version.

    Is there a way for plants to create nitrogen from the air? These researchers think so and if they are correct, this is a world-changing advancement. A plant-inspired coating may create self-cleaning glass–won’t that be great for windows! And can we create self-cooling windows by mimicking nature?

A map put together by the folks at BillSportMaps.com showing average attendance in 2007 for the programs drawing more than 40,000 fans per football game. You can see that the top 10 of this list is dominated by Big Ten and SEC teams.
  • Ah college football, it’s a shame the season isn’t another month long. As we ramp up for bowl season, here is a fun map to keep your interest peaked for the championship games. This map shows the average attendance of all teams that drew more than 40,000 fans per game in 2007. Thanks to Bill Turianski for putting this on BillSportMaps.com.
  • Winter is here and well sweaters were on my mind when I Googled, “GIS and wool.” That lead me to this map of 2007 wool production in Texas–hmmm, wool in Texas? So from there, I found out that Texas is a leading producer of wool in the US and that back in the 1940’s, the US was a top 5 wool producer. You learn something new every day!
  • From the Mountain West, we head to the flat lands of Illinois and explore the GIS resources of the windy city, Chicago. The city of Chicago has given consideration to experience GIS users as well as just map users on their site. For the GIS user, there are more than 260 data layers that can be accessed here. Some of the files here are in KML format so they can be opened in Google Earth by all interested parties. And for those looking to explore the City’s maps online, here is a viewer that can be queried by address with multiple layers of data to overlay.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

For projects requiring a more detailed look than can be offered by the common free sources of elevation data and for those in cloudy or hard-to-reach regions where this data is of poor quality, Astrium GEO’s Elevation10 product suite is the ideal solution. Elevation10 is a 10-meter digital elevation model (DEM) derived from stereo pairs collected by the radar satellite, TerraSAR-X. These DEMs are often delivered within a month from order placement utilizing data obtained in the past two years.

TerraSAR-X is a synthetic aperture radar (SAR) satellite, meaning it is an active sensor unlike the optical satellites most of us are familiar with such as QuickBird, Pleiades 1 and WorldView-2. An active sensor is one that (1) creates an energy pulse, in this case radar waves; (2) aims them at a surface, in this case our planet; and then (3) very accurately measures the amount of time it takes for this pulse to return to the sensor. Radar waves can pass right through clouds which are an optical satellite’s worst nightmare.

As TerraSAR-X is measuring the time it takes energy pulses to return to its sensors as well as its position in space in the XYZ directions, radar stereo pairs have higher accuracy than do traditional pairs collected by optical satellites. This means that elevation data extracted from TerraSAR-X stereo pairs is accurate even without the use of ground control points. Ground control points can be expensive to collect–particularly in remote and unsafe areas–so this can be a significant cost savings vis-à-vis other elevation products.

Click on the image above to see an animated comparison of 10-meter Elevation10 (both a DSM and DTM), 30-meter ASTER GDEM and 90-meter USGS SRTM data obtained over Barcelona, Spain. (Image Sources: USGS, JPL and Astrium GEO)

Elevation10 is created from TerraSAR-X radar stereo pairs collected in StripMap mode. StripMap data has resolution up to 3-meters with a footprint that is 30 kilometers (km) wide by 50 km long. By employing TerraSAR-X stereo pairs collected in both ascending and descending directions, Astrium GEO is able to remove many of the anomalies that are common in SAR elevation data.

Elevation10 is offered as both a digital surface model (DSM) which includes vegetation, buildings and other human-made structures; and as a digital terrain model (DTM) where these have been removed. DTMs are hydrographically enforced to make sure that features which impact water flow, such as dams and embankments, are represented. Hydrographic enforcement is also offered with DSMs. The accuracy specifications for Elevation10 are as follows:

  • Absolute Horizontal Accuracy–5 to 10 meters (Circular Error 90%, CE90)
  • Absolute Vertical Accuracy–5 to 10 meters (Linear Error 90%, LE90)

For regions of the world with limited access, such as the Himalayas and the Andes, or in regions with persistent cloud cover and/or haze, such as Malaysia and Beijing, Elevation10 is the ideal solution. Elevation10 data is priced by the square kilometer according to area and product type with academic discounts available. For more information about Elevation10, contact your Apollo Mapping sales representative at (303) 993-3863 or sales@apollomapping.com.