As the build out of Apollo Mapping’s GIS cloud continues, this month we made a decision on a new name, Map Mavin. We have yet to change our website to reflect the new name but we will be doing that in the coming days once the logo is set. We are hoping that next month we will have a few screengrabs or even a short video to show you Map Mavin in action–stay tuned please!

While we are busy building out the infrastructure and technology required to support the most flexible GIS cloud on the market, now is a great time to explain a bit about the Map Mavin.

Some of you may have used other GIS cloud services in the past, and in many ways the Map Mavin will be similar to these. But the Map Mavin will distinguish itself in a variety of important manners. Here is a list of the key features that will be unique to the Map Mavin:

  • Near-instant set-up–unlike other GIS clouds, the Map Mavin will take less than five minutes to sign up for, load data on to and get started using. No other cloud comes close to that flexibility.
  • Tons of free spatial data–included with every subscription is access to more than 4 terabytes (TB) of free vector and raster data covering the United States and many parts of the world.
  • A marketplace for spatial data – all users will have access to a library of spatial data that can be added to your GIS cloud. Further, users will be able to post data they have created to the marketplace to sell to other users (or let them use for free if you wish).
  • Cloud computing – we will ask all users for feedback on the spatial operations they perform most frequently and will then implement the most popular ones in the Map Mavin.
  • Free entry-level subscriptions – users will be able to use the full-functionality of Map Mavin with a free 30-day demo or up to 5 megabytes of storage. And once you pass this storage limit or 30 days of usage, subscriptions will start at just $10.00 per month!
  • A robust online viewer–for those users in your organization lacking access to a GIS application, the Map Mavin will feature an online viewer that can be accessed from anywhere in the world as long as users have internet access.
  • Enhanced browsing speeds – we will have all of your spatial data cached in multiple locations around the world so access times will be greatly reduced for international users.
  • Flexible streaming architecture – administrators will be able to setup multiple WMS and WFS feeds that can be shared with the appropriate teams of data users. Each feed can be seeded with the datasets these users need access to.
  • Industry-leading data redundancy – with 99.999999999% data redundancy, you can be assured that your data will not be lost once placed on the Map Mavin.

Do you have any specific questions you would like answered about the Map Mavin? Or perhaps you want to join the beta program? If so, let us know by email at sales@apollomapping.com.

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe Basemap (GBM).

With DigitalGlobe Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of GBM is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

October 2015 Product Update

**Sorry–this is a rerun from last month as we were not able to obtain new information on GBM in time for this article run.**

Each month, DigitalGlobe adds new imagery to the GBM database. Here is a quick update on the coverage statistics for Australia as well as for the USA +Refresh version of GBM whereby 90% of the continental states will be no older than 12 months.

A coverage map showing available DigitalGlobe Basemap imagery over Australia by location and the most recent coverage date as of September 15, 2015. In many locations, there are multiple imagery dates available.
  • Australia GBM
    • Less than 1 year old–58.68% of Australia
    • Less than 2 years old–90.95% of Australia
    • Less than 3 years old–94.52% of Australia
    • Less than 4 years old–95.87% of Australia
    • Total Coverage–99.99% of Australia
  • USA GBM +Refresh (excludes Alaska)
    • Color imagery less than 1 year old–6,882,719 sq km, which covers 88.17% of the continental USA
    • Pan imagery less than 1 year old–3,837,294 sq km, 49.16% of the continental USA
    • Total imagery less than 1 year old–7,407,917 sq km, 94.90% of the continental USA

DigitalGlobe Basemap Product Specifications

Here is a summary of the key GBM product specifications:

  • Geographic Regions Covered: defined area of interest, US county, country or global
  • Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 60-cm for other delivery mechanisms
  • Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
  • Database Update Frequency: annual, semi-annual, quarterly or daily; updates are to limited portions of the database, not the entire database
  • Data Accuracy:5-meter CE90%
  • Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
  • Pricing Model: transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)
  • Subscription Term: annual

For more information on the pricing and coverage available in DigitalGlobe Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.

Processed by Apollo Mapping for improved color accuracy and clarity. (Image Courtesy: DigitalGlobe)

We love maps.

We love imagery.

We love work breaks.

We hope you like them as well!

Your work day is chugging along–don’t you deserve a break now?! We think so (if that means anything), so when you take that next break, check out the 30-centimeter natural color image collected by WorldView-3 on May 1, 2015 over Lake Hillier in southwestern Australia. Don’t adjust your monitor as the pink color is no mistake! This is one of the world’s natural mysteries as no one knows what causes its pink color. Some believe the color is caused by a suspended algae called Dunaliella salina, and others by the presence of bacteria in the lake’s salt crusts. Whatever is the cause, this is one cool looking lake; and as an added bonus, the pink color remains even when the water is bottled!

Have a great rest of your workday! J

I believe I’ve moved (changed states) thirteen times and am about to make it an even fourteen. Now, to be fair, some of those moves were for preset amounts of time, two stints for two months in Oregon, a three month foray into Mississippi, so these treks didn’t involve moving all my stuff, but they did at least involve changing locations and uprooting familiarities and routines. I have always prided myself on my vagabond-like tendencies; always up for a new experience. But as I’ve gotten older, they’ve lost their luster. I’m more looking forward to the day when I can put down some roots and set up camp. Move number 14 will not have that result. It is yet another stopgap on a series of them that have grown tiring. But it is a choice I’ve made, however much it was based on outside forces. But nonetheless, I’ll soon be on the road again. I have to assume Willie Nelson is beyond sick and tired of that song. I’m sick and tired of simply being on the road.

I’ve come to notice that I’m not especially strong at making large numbers of friendships wherever I live. I think because it was so easy in high school and college through associations that I developed or fell into, I just assumed it would always be that way. The strategies that worked in the past didn’t in the new stops and I began to become more self-sufficient in what I needed from other people. Maybe you could say I became more of an introvert, but I think it was more that I became pickier about who I wanted to hang out with. Too picky, in most cases. Quality of relationship became far more important than quantities of relationships, which frankly, it should be; but also accompanying that fact was an unintentional self-isolating component. Perhaps there was some social anxiety sprinkled in there along with some apathy, but the largest ingredient was a lack of knowledge of how to follow through. Friendship formation was indeed lost in translation more often than not.

That is until I’m about to move. When it becomes clear that I’m packing up the wagon and moving onto other pastures, I guess I become sentimental or nostalgic. I reach out to those that I consider real friends and try to make opportunities to hang out a few more times, but I also reach out to those that I either kept on the peripheral or never really made the effort to befriend. It kind of seems like all along I’m deciding on whether they’d make a good friend or not, but never really giving them the chance. And I imagine that because of this possibility rolling around in my head, it unconsciously causes me to put out a front of indifference. Maybe I’m not the most welcoming individual. I remember when I was young and I would go to the store with my mom, she would inevitably be curt to some shop worker, not because she was rude per se, but because she didn’t suffer fools. I had to remind her that these people were just doing their job and trying to help her. I think it might have been the only time I offered my mom good advice. Anyhow, maybe that rolled off onto me. Certainly not with shop workers, waiters and service people, but with friends, or should I say, potential friends.

And I’ve noticed, too, that many of my romantic escapades occur in the waning months of my impending departures. For a while I chalked it up to serendipity, or perhaps the world’s forces bidding me adieu, but maybe it’s because I’m looking to make one last connection with where I’ve spent so much time. And what better way to connect then, well, you know… But I ask myself why I don’t put forth these efforts earlier? What is it about the final days or weeks of being somewhere that prompts me to reach out?

The one thing I have been good at when it comes to friendships is staying in touch. I always call my friends on their birthdays (not this post on FB garbage), I make the effort to go to their hometowns and see them or arrange trips where a group of us can convene in a unique area, and I keep tabs on their personal trajectories. I invest in them because they mean so much to me. But why doesn’t that translate to the cultivation of new friendships? And why does it only rise to the surface when I’m about to change latitude?

I have a lot of time to think. I enjoy it. I’m probably overly self-aware, but still manage to have a brash ego. A healthy mix in some instances, a harsh critic in others. But as I walk my dog, hike in the woods, listen to music, drink a beer, go to yoga or drive across the country, I delve deeper into my psyche to sort out what I’ve done and what I think I need to do to get to where I’m going. So far these plans haven’t worked out so well; perhaps they’re half-baked. But you have to start somewhere, right? I actually once almost convinced myself that my best ideas came to me when I was drunk. Then when I woke up the next day they didn’t seem to spot-on. Usually spot-off. But in the moment there was this clarity as if I had figured everything out, as if I knew how to fix all of my problems. Well, come sunshine time I was blinded by the light. But the thick, murky clouds of disparity, or the streams of golden opportunity all have their way of blinding me until I get closer to the edge of departure. Then it seems clear that I better take advantage of the situation, because it won’t be available much longer. So I reach out, even if only for a little while.

So it seems I’m always leaving. And it also seems I’ve never resolved anything. Is this a clear example of fight or flight? Or am I just simply not that concerned with creating more connections until I am? I mean, it isn’t necessarily bad that I don’t reach out until I’m about to depart. It’s kind of like pulling your chute at the last minute, soaking in that freefall until it’s time to glide back to earth safely. But I have to admit, if I’m honest, this metaphor of the freefall, well, as it applies to me, it ain’t that great. It seems that the gentle float back down to the ground is the more rewarding element in this case. So maybe I need to make more of my life a float, and less of a freefall. The freefall appears to be a rush to judgment, hurrying up to wait, being oblivious to opportunities and a blockage of potential _____. And while the freefall, at least in the real world flies by (no pun intended), here the float goes by too quickly as well, as comfortable and enjoyable as it may be. So perhaps the lesson for me is that I should embrace the float and look for more of that in my everyday life. The slow motion meandering of life is more captivating than speeding through life without enjoying it. The only problem is that I’m always leaving…

Marco Esquandoles
Slim Pickings

As the resolution of imagery increases so do file sizes which means it is rather common for us to work with source raster data in a compressed format such as ECW, MrSID or JPEG2000. And while it would be excellent if these compressed formats work as nicely as “native” GeoTIFF imagery files do, that has not been the case for us often. So it is the focus of this edition of the Geospatial Tip of the Month (GTM) to offer a few tips for working with compressed ECW imagery files in ArcGIS.

A little history here for our readers before I jump into this GTM. We had a project in Texas where we were asked to match a newly collected WorldView-2 dataset to an older orthorectified imagery layer from the same location. The goal was to improve the spatial accuracy of the WorldView-2 dataset so that it matched the older dataset which happened to be in compressed ECW format. When we tried to work with the ECW imagery tiles, we quickly hit a road block as the software we typical use for orthorectification would not recognize the ECW files. In fact, only ArcGIS would even load the tiles but they did not have a projection so it was my goal to figure out a work around which is also the topic of this GTM!

Solution 1–Change the Order in Which You Load Spatial Files

When I tried to load the 50+ ECW tiles given to me by our client, I received the all too common warning in ArcMap about an Unknown Spatial Reference which usually means your data might have coordinates that Arc recognizes but is not exactly sure which projection they refer too. In many cases, this is an easy problem to solve in that you can use the Define Projection toolbox function to set the projection if it is known. The issue with ECW files is that they appear not to hold a projection even if you try to define one, see this Esri blog post as we are not the only ones that faced this.

As a quick side note to this discussion, I have a few theories on why ECW files cannot be projected. First, the GeoTIFF file format has metadata tags inside the file which can be read by spatial software solutions like ArcGIS; and so I would assume ECW files do not have these similar metadata tags that store projection information. Or perhaps, according to the GDAL website, ECW files can only assume “common” projections. A second related theory is that World Files are commonly appended to spatial files where projection information cannot be stored in the metadata, take for example JPEG2000 world files called .J2W. Perhaps ECW world files cannot be created for the simple fact of naming conventions as the file format already ends in a W?

Anyhow, let’s get back to the topic at hand. In the example above, the first thing I did was load the ECW files which did not have a known projection. Now, if I were to load a shapefile, for example, properly set in the same projection as the ECW that intersects the imagery, the current map session would still not have a projection. However, if I were to load the same projected shapefile first and then the unrecognized ECW file, viola, there would be a map projection for the current session and they would line up. This process is called on-the-fly projections and is a topic we have covered in the past here. In a quick sentence, ArcGIS sets the projection of the map session to that of the first file you load, so if the second (and subsequent) files you load are in this same projection, ArcGIS assumes the projections match and the data appears in its correct location. It will not however change the unrecognized but assumed projection of the current map session if an unprojected file, like the ECW here, is loaded first and then a projected shapefile is. This is a pretty simple solution but admittedly it is not actual solving the ECW projection issue.

Solution 2–Changing the Format of Your ECW File

Okay so the second solution is not very elegant but it is effective as I could not figure out any way to actually project an ECW file. So then the solution is converting your ECW file(s) to a different format, such as a GeoTIFF, and then projecting this file. The best way to do this is with the Mosaic to New Raster toolbox function. In the short Youtube video that accompanies this GTM, I walk you through this process.

This 5 minute YouTube video shows you the two ArcMap solutions offered above for ECW projection issues. I am using ArcMap 10.3 in this video.

As a quick final side note to this discussion, while my focus was on ECW files, I would assume that these “solutions” would work for any compressed imagery format such as JPEG2000 and MrSID with these projection issues.

Do you have an idea for a future GTM? If so, let me know by email at brock@apollomapping.com.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

Do you have an area of interest that requires regularly updated imagery but you do not have time to check daily for this data?

Or perhaps you have a remote location that needs updated imagery but you cannot afford a new collection?

If either of these questions ring true, then you need to check our new Data Alert service on Image Hunter!

Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once this is set up, we check for new data over your area of interest every single day, and send you an email alert when we find coverage that meets your specifications.

We have a short YouTube video with directions to set up a Data Alert, check out the second video. We also have written directions for Data Alert here.

It’s that easy to find the data you need for all of your key projects.

If you would like to check out Data Alert, send us an email at sales@apollomapping.com; or visit Image Hunter and click on the bell icon in the header to get started using this great service!

For three years, Airbus’ twin high-resolution radar satellites, TerraSar-X and TanDEM-X, imaged the entire land surface of our planet multiple times to create the first ever global 12-meter (m) elevation model. Referred to as WorldDEMTM, this data is ideal for all mapping projects requiring accurate elevation models including orthorectification, floodplain determination, mineral exploration and hydrocarbon development.

WorldDEM October 2015 Product Updates

A comparison of 30-m SRTM and 12-m WorldDEM elevation data over Arkansas, USA.

Sales of the bare earth version of WorldDEM, referred to as WorldDEM DTM, have commenced. And in September, the price for 12-meter WorldDEM DTM dropped significantly to $21.60 per square kilometer. Any area that is ready to order can now be produced in all three WorldDEM formats–see below for technical details on these formats.

During September, the rest of South America was made available including the rugged Andean mountain range. WorldDEM areas that are available to order take a minimum of 10 days to deliver.

To date, there is more than 133,206,000 square kilometers (sq km) of WorldDEM data that is available! And some 2,470,000 sq km of WorldDEM was made available for delivery in the past month alone.

WorldDEM Specifications

The key product specifications of Airbus’ WorldDEM are as follows:

A coverage map of the one-degree cells that are currently available for delivery. Areas that are available will take a minimum of 10 days to deliver.

  • Resolution: 12-m
  • Coverage: entire landmass of the Earth, ~150 million square kilometers (sq km)
  • Absolute Vertical Accuracy: < 4-m Linear Error 90% (LE90)
  • Relative Vertical Accuracy: < 2-m LE90 (slopes ≤ 20%), < 4-m LE90 (slopes > 20%)
  • Absolute Horizontal Accuracy: < 10-m Circular Error 90% (CE90)
  • Vintage: all data collected within 3 years
  • Source: interferometry from synthetic aperture radar (SAR) satellites TerraSAR-X & TanDEM-X
  • Minimum Order: 500 sq km per polygon
  • File Format: GeoTIFF
  • Projection: geographic WGS84 (EGM2008, vertical datum), meter vertical unit
  • Product Line Options:
    • WorldDEMcore–unedited digital surface model (DSM), includes spikes, wells and voids
    • WorldDEM–a DSM with removal of artifacts and water body flattening
    • WorldDEM DTM–artifacts and surface features removed, i.e. a digital terrain model (DTM)

WorldDEM Coverage and Pricing

WorldDEM data has a 500 sq km minimum order size with a 10-km width requirement. Prices for two of the product lines have been set:

  • WorldDEMcore–$10.80 per sq km
  • WorldDEM–$13.50 per sq km
  • WorldDEM DTM–$21.60 per sq km (that’s a 20% savings from the original list price!)

WorldDEM Samples

You can download four 12-m WorldDEM samples here, including one of the WorldDEM DTM product:

  • Buraydah, Saudi Arabia–desert with agriculture present; elevations from 576 m to 737 m provided in two formats, WorldDEMcore and WorldDEM
  • Mjosa Lake, Norway–hilly terrain with large water bodies; 100 m to 840 m provided in two formats, WorldDEMcore and WorldDEM
  • Rapid City, South Dakota, USA–moderate to hilly terrain; elevations from 927 m to 1,765 m provided in two formats, WorldDEM and WorldDEM DTM
  • Wagga Wagga, Australia–forest and urban with many water bodies; 137 m to 922 m provided in two formats, WorldDEMcore and WorldDEM

For more information about 12-m WorldDEM data, please send us an email at sales@apollomapping.com or check our website here.

The NOAA land and ocean temperature percentiles departure map for September 2015. You can see warmer than average to record warmth across much of the globe, with large pockets of cooler than average over Alaska, southern South America and central Asia.

  • The global warming trend continues as confirmed by the September 2015 NOAA global climate report. Here are a few highlights from the latest report. This is the fifth month in a row that set an all-time high temperature record for that month. September 2015 was also the warmest month on record out of the 1,629 months we have data on. The months from January to September 2015 represent the hottest 9-month stretch in the 136 year record as well.
  • In honor of North Dakota joining the United States on November 2, 1889, for my Google search of the month I used this string, “North Dakota and GIS.” If you comb through the results, you might come across this poster which highlights oil spills in the state–events that are rarely covered unless they are of a significant size. The poster of maps and associated metadata was put together by Elena Nikolova of Tufts University.
  • From Ohio we travel to the other side of the Midwest with a review of the online GIS resources of Oklahoma’s largest city, Oklahoma City. And while their main page on the OKC government website is less than spectacular, their data portal is likely the best online GIS resource we have seen for a city yet. It has everything any user could ever need, including downloadable datasets; an online map viewer; searches for parcel level information by address, street and plat code; and even a web API access for developers. Huge props to the Oklahoma GIS folks–this is one awesome site!

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com