For projects requiring a more detailed look than can be offered by the common free sources of elevation data and for those in cloudy or hard-to-reach regions where this data is of poor quality, Astrium GEO’s Elevation10 product suite is the ideal solution. Elevation10 is a 10-meter digital elevation model (DEM) derived from stereo pairs collected by the radar satellite, TerraSAR-X. These DEMs are often delivered within a month of order placement utilizing data obtained in the past two years.
TerraSAR-X is a synthetic aperture radar (SAR) satellite, meaning it is an active sensor unlike the optical satellites most of us are familiar with such as QuickBird, Pleiades 1 and WorldView-2. An active sensor (1) creates an energy pulse, in this case radar waves; (2) aims them at a surface, in this case our planet; and then (3) very accurately measures the amount of time it takes for this pulse to return to the sensor. Radar waves can pass right through clouds which are an optical satellite’s worst nightmare.
Click on the image above to see an animated comparison of 10-meter Elevation10 (both a DSM and DTM), 30-meter ASTER GDEM and 90-meter USGS SRTM data over Barcelona, Spain. (Image Sources: USGS, JPL and Astrium GEO)As TerraSAR-X measures the time it takes for energy pulses to return to its sensors as well as its position in space in the XYZ directions, radar stereo pairs have higher accuracy than do traditional pairs collected by optical satellites. This means that elevation data extracted from TerraSAR-X stereo pairs is accurate even without the use of ground control points. Ground control points can be expensive to collect–particularly in remote and unsafe areas–so this can be a significant cost savings vis-à-vis other elevation products.
Elevation10 is created from TerraSAR-X radar stereo pairs collected in StripMap mode. StripMap data has resolution up to 3-meters with a footprint that is 30 kilometers (km) wide by 50 km long. By employing TerraSAR-X stereo pairs collected in both ascending and descending directions, Astrium GEO is able to remove many of the anomalies that are common in SAR elevation data.
Elevation10 is offered as both a digital surface model (DSM) which includes vegetation, buildings and other human-made structures; and as a digital terrain model (DTM) where these have been removed. DTMs are hydrographically enforced to make sure that features which impact water flow, such as dams and embankments, are represented. Hydrographic enforcement is also offered with DSMs. The accuracy specifications for Elevation10 are as follows:
- Absolute Horizontal Accuracy–5 to 10 meters (Circular Error 90%, CE90)
- Absolute Vertical Accuracy–5 to 10 meters (Linear Error 90%, LE90)
For regions of the world with limited access, such as the Himalayas and the Andes, or in regions with persistent cloud cover and/or haze, such as Malaysia and Beijing, Elevation10 is the ideal solution. Elevation10 data is priced by the square kilometer according to the product type with academic discounts available. For more information about Elevation10, contact your Apollo Mapping sales representative at (303) 993-3863 or sales@apollomapping.com.
This map shows the areas imaged by the Pléiades 1 constellation from January to March 2016 over southern Africa. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high-resolution satellite constellation, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.
Graphic Region of Interest: southern Africa
Land Mass Covered: 10,744,475.1 sq km
Time Period: January 1 to March 31, 2016
High-Resolution Satellite Constellation: Pléiades 1 (i.e. Pléiades 1A and 1B)
Pléiades 1 Constellation Imaging Statistics–Southern Africa
Total Area Collected: 4,145,828.7 sq km; 22,779.3 sq km per satellite/per day
Area Collected @ 20% or Less Clouds & 30 Degrees or Less Off-Nadir: 1,988,882.9 sq km; 10,927.9 sq km per satellite/per day; 48.0% of total
Are we alone? This simple question comes from the very core of our humanity. Self-awareness sends us to the ends of the Universe looking for answers, hoping for some understanding of our place in a sea of unknowns and our ultimate mortality. Some turn to religion or spirituality to find solace, others search the night sky looking for their own answers. In the vastness of space, many people believe that we are not alone, that on some earth-like planet light-years away there are other, similar creatures or microscopic amoeboid-life floating in an alien ocean. NASA has taken on this very mission, combing the Universe for planets that could harbor life with their Kepler mission.
NASA recently announced the largest discovery of exoplanets to date. 1,284 new planets have met the 99 percent threshold necessary to be considered a planet, 550 of these planets are believed to be small and rocky, and then nine of those are orbiting in the habitable zone around a central star. Meaning the environmental conditions could be ripe to support life as we know it. This increases the count of possibly habitable planets to 21, and more than doubles the exoplanet count to 2,327. This is all thanks to a new automated technique that assigns a planet-hood probability percentage to each Kepler candidate. This facilitates the processing of a large number of candidates at one time and helps identify stars that are home to planets that could contain life. This in turn helps inform future missions to study habitable worlds.
Kepler has done an amazing job of detecting the dips in brightness from a star that characterize transiting planets. The Transiting Exoplanet Survey Satellite (TESS) will carry on the Kepler mission when launched in 2018. During its 2 year mission, TESS will monitor more than 200,000 stars and their orbiting bodies, planets that vary from earth-sized to large gas giants. TESS differs from Kepler in that it can look at stars that are 30 to 100 times brighter. Candidate planets discovered by TESS will then be studied by the James Webb Space Telescope (JWST), which launches into space in October of 2018.
Webb is the successor to the Hubble Space Telescope. Hubble provides us with some of the most illuminating and fascinating images of our Universe. Everything we learned from the Hubble mission informed the Webb design. Webb will orbit Earth further out then the Moon, cutting down on atmospheric interference; and it has a much larger mirror focusing on infrared wavelengths, instead of optical, in order to measure more distant objects. I couldn’t be more excited about a telescope, only two and half more years before I can start obsessing over Webb images. Every scientific revelation and developing theory creates a new generation of innovation and discovery. For all we know, we could zero in on a planet just like ours in our lifetime as we continue boldly going where no one has gone before.
Starting immediately, we are happy to announce that DigitalGlobe satellite imagery from WorldView-1/2/3, GeoEye-1 and QuickBird can now be ordered at 70-centimeter (cm) resolution for a significantly reduced cost. The new model puts DigitalGlobe imagery products at a comparable price point to other 70-cm to 1-meter (m) datasets on the market. So for projects where pricing is crucial and 70-cm resolution is acceptable, there is no better choice than this new offering from DigitalGlobe.
A 70-cm color WorldView-2 image from rural Australia collected on December 30, 2013. You can see superior colors and crispness in this data when compared to other satellite imagery at a similar resolution. This image has been manually color balanced by Apollo Mapping. (Image Credit: DigitalGlobe)Our initial tests of 70-cm DigitalGlobe imagery were very encouraging, here are the advantages we have noticed when compared to other 70-cm to 1-m datasets:
- The color and crispness of the 70-cm DigitalGlobe imagery is far superior.
- The positional accuracy of the 70-cm DigitalGlobe imagery is exactly what you can expect from the full resolution versions; thus it is far more accurate than competitors.
- The archive of this data is much larger than any competitor (or even all of the competitors combined), and it goes farther back in time.
- At this greatly reduced price point, there is no other data than comes close to the value offered by 70-cm DigitalGlobe imagery.
If you are interested in a new price list that includes 70-cm DigitalGlobe imagery, send us a note at sales@apollomapping.com.
Please note that a 4-band bundle will be delivered at 70-cm panchromatic and 2.8-m multispectral resolution.
For three years, Airbus’ twin high-resolution radar satellites, TerraSar-X and TanDEM-X, imaged the entire land surface of our planet multiple times to create the first ever global 12-meter (m) elevation model. Referred to as WorldDEMTM, this data is ideal for all mapping projects requiring accurate elevation models including orthorectification, floodplain determination, mineral exploration and hydrocarbon development.
WorldDEM April 2016 Product Updates
Sales of the bare earth version of WorldDEM, referred to as WorldDEM DTM, have commenced. And in September 2015, the price for 12-meter WorldDEM DTM dropped significantly to $21.60 per square kilometer. Any area that is ready to order can now be produced in all three WorldDEM formats–see below for technical details on these formats.
During April no new WorldDEM data was released. As we near the completion of WorldDEM production, we expect there will be more months without new elevation data being released. However, you will be the first to know when new data is released in these monthly updates. To date, there is more than 159,190,000 square kilometers (sq km) of WorldDEM data that is available.
A coverage map of the one-degree cells that are currently available for delivery. Areas that are available will take a minimum of 10 days to deliver.WorldDEM Specifications
The key product specifications of Airbus’ WorldDEM are as follows:
- Resolution: 12-m
- Coverage: entire landmass of the Earth, ~150 million square kilometers (sq km)
- Absolute Vertical Accuracy: < 4-m Linear Error 90% (LE90)
- Relative Vertical Accuracy: < 2-m LE90 (slopes ≤ 20%), < 4-m LE90 (slopes > 20%)
- Absolute Horizontal Accuracy: < 10-m Circular Error 90% (CE90)
- Vintage: all data collected within 3 years
- Source: interferometry from synthetic aperture radar (SAR) satellites TerraSAR-X & TanDEM-X
- Minimum Order: 500 sq km per polygon
- File Format: GeoTIFF
- Projection: geographic WGS84 (EGM2008, vertical datum), meter vertical unit
- Product Line Options:
- WorldDEMcore–unedited digital surface model (DSM), includes spikes, wells and voids
- WorldDEM–a DSM with removal of artifacts and water body flattening
- WorldDEM DTM–artifacts and surface features removed, i.e. a digital terrain model (DTM)
WorldDEM Coverage and Pricing
WorldDEM data has a 500 sq km minimum order size with a 10-km width requirement. Prices for two of the product lines have been set:
- WorldDEMcore–$10.80 per sq km
- WorldDEM–$13.50 per sq km
- WorldDEM DTM–$21.60 per sq km (that’s a 20% savings from the original list price!)
WorldDEM Samples
You can download four 12-m WorldDEM samples here, including one of the WorldDEM DTM product:
- Buraydah, Saudi Arabia–desert with agriculture present; elevations from 576 m to 737 m provided in two formats, WorldDEMcore and WorldDEM
- Mjosa Lake, Norway–hilly terrain with large water bodies; 100 m to 840 m provided in two formats, WorldDEMcore and WorldDEM
- Rapid City, South Dakota, USA – moderate to hilly terrain; elevations from 927 m to 1,765 m provided in two formats, WorldDEM and WorldDEM DTM
- Wagga Wagga, Australia–forest and urban with many water bodies; 137 m to 922 m provided in two formats, WorldDEMcore and WorldDEM
For more information about 12-m WorldDEM data, please send us an email at sales@apollomapping.com or check our website here.
After two months in a row with a focus on web maps, we pivot our attention a bit for this Geospatial Tip of the Month (GTM) with what will be a brief article but hopefully one covering a useful topic! As part of purchasing satellite imagery from Apollo Mapping, we download and archive a copy of every order we deliver. In order to keep costs down, I store these large files in compressed ZIP files. And while it sounds like an easy task to compress these files, when you have 20 or more orders to process each week, the time it takes to do this seemingly easy task is surprisingly long. So this month, I feature a handy little script that will automatically compress a folder full of folders for you!
In order to make the script I share here work, you will first need to download and install the freeware compression software called 7-Zip. You can download the program files here. I am a Windows users with a 64-bit machine so I download the newest .EXE version of the install files which is listed in the first table. And as a quick heads up, to use the script provided here, you will need to be running a Windows computer–sorry to my Mac friends up front!
Now that you have 7-Zip installed, the steps from here are super simple! Just download the script I wrote from here and then uncompress the file. Place the tiny script in a folder that contains a set of folders you need to compress. Just double-click on the script and the process runs automatically for you! In the end, you will have one zip file per folder with a name that is the same as the original folder name. Once the process runs, delete your folders of uncompressed data and you are all set.
This is some serious time-saving stuff as I estimate it saves me at least 30 minutes of work a week alone!
Do you have an idea for a future GTM? If so, let me know by email at brock@apollomapping.com.
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com
Every time we look at WorldView-3 (WV3) imagery, we are blown away. And we hope you are equally impressed with the data! From the Lunar party featured in last month’s stop in Hong Kong, we travel to one of the Middle East’s most modern cities, Dubai, United Arab Emirates, for this stop on the WV3 Image of the Month.
PLEASE NOTE: Effective November 2015, WorldView-3 prices dropped at least 25% for each and every imagery product; and prices even dropped more than 50% for shortwave infrared (SWIR) data! Are you interested in finding out more about these price drops? If so, send us an email at sales@apollomapping.com. You can also find out a bit more about these new WV3 prices in this older article from The Geospatial Times.


Dubai is one of the coolest cities to look at from top-down as the various architects working here have clearly given thought to making their buildings appear amazing from any angle. The first image featured here is the Burj Khalifa, currently the world’s tallest structure at 828-meters. The second image appears to show the posh courtyard of a newly built community. And the final image is just one cool looking roof. These three 30-cm WorldView-3 images were collected on September 18, 2014 over Dubai, UAE. (Image Courtesy: DigitalGlobe)WorldView-3 launched in late 2014 and it is the most advanced satellite the commercial marketplace has ever had access to. Here are a few of the features that really set it apart from the competition:
- Improved Resolution
- Higher resolution means you can see more detail in WV3 imagery.
- Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR and 30-m CAVIS bands.
- At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
- Per US government regulation, all SWIR orders are produced at a maximum resolution of 7.5-m. CAVIS bands are not available for purchase at this time.
- Additional Spectral Bands
- If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
- Better Positional Accuracy
- With accuracies of 3.5-m CE90% or better (without ground control even!), WV3 has no rivals for its enhanced positional accuracy.
- Daily Revisits
- At 40 degrees latitude, WV3 will be able to image each location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
- Increased Collection Capacity
- WV3 features a 13.1-km swath width (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day.
- Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.
If you are interested in WorldView-3 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.
You can also find more samples and technical information on our website here.

