In this monthly feature, we span the globe to examine Our Changing Landscape with a time series of medium resolution RapidEye satellite imagery. The RapidEye archive dates back to late 2008 and already contains more than 14 billion square kilometers of data. For December, we checked out the destruction left behind after a major hurricane hit the Florida coast here in the USA, and for the January edition of Our Changing Landscape we check out changes on Mount Everest over a single year.


Click on the image above to see an animation of 5-meter natural color RapidEye imagery collected over the Mount Everest region on November 17, 2016, February 23, 2017, November 13, 2017 and January 6, 2018. With images spanning the four seasons, we had expected to see more changes in the landscape around Mount Everest. However, it appear other than a bit less snow cover in the regions distant from the peak, little changes at 5-m resolution on Mount Everest! (Images Courtesy: © Planet 2018)

The RapidEye Constellation

RapidEye is a constellation of five 5-meter (m) medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers daily revisits to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a starting cost of $1.28 per square kilometer for all five spectral bands–academics do receive discounts. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data in the red edge band allows users to extract more useful land ‘information’ than can be from traditional 4-band imagery sources. When RapidEye imagery is ordered as a Level 3A Orthorectified product, images from multiple dates are extremely well registered, making it the ideal data source for Our Changing Landscape.

The Four Seasons on Mount Everest

With its peak straddling the border of China and Nepal, Mount Everest towers over our planet as the world’s tallest mountain (when measured from sea level), standing proudly at a height of 29,035 feet (8,850 meters). As you might imagine the towering height of Mount Everest means the weather conditions on the slopes are treacherous–with summer temperatures reaching an average of 56 degrees Fahrenheit (13.3 degrees Celsius) during the day while winter temperatures peak at just 24 degrees Fahrenheit (-4.4 degrees Celsius). The summer months on Mount Everest are also the snowiest with average precipitation peaking at 5.3 inches (135 millimeters) during August. When considered together, the typical weather patterns on Mount Everest allow for two very narrow climbing seasons, one in October and one in late May to early June. Despite knowing when it’s the safest to climb Everest, human tragedies are common, not to mention the dire environmental consequences of these climbs.

Mount Everest is a part of the Himalayan Mountain range. The Himalayas are characterized by bands of flora and fauna that change as elevation increases. At the base of most of mountains in the range are tropical and subtropical forests with lush green understories and canopies often dominated by oaks and maples. As you move up in elevation, the lush broadleaf forests give way to those dominated by evergreens such as pines, hemlocks, spruce and firs. Above the tree line, you will still find a diverse community of mountain grasses and shrubs. With all of these changing biomes and the changing weather patterns, it will be interesting to see what the 5-meter RapidEye archive shows over a single year on and around Mount Everest.

If you would like to find out more about using RapidEye for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

The available DigitalGlobe EarthWatch imagery over Africa by location and with the most recent coverage date indicated with varying colors. In the vast majority of locations, there are multiple imagery dates available.

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s EarthWatch (formerly called Global Basemap or GBM).

With EarthWatch, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of EarthWatch is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

January 2019 Product Update

Last month we checked out the EarthWatch coverage over South America and for this month, we move across the Atlantic with a look at the EarthWatch coverage over Africa. As you will see in the map associated with this article, the current coverage over Africa is very extensive, particularly along the coasts and in southern Africa. Here is a breakdown of the EarthWatch coverage over Africa by year:

  • Africa EarthWatch Coverage By Year
    • Less than 1 year (yr) old–22,054,606 sq km, 73.8% coverage of Africa
    • 1 to 2 yr old–22,183,759 sq km, 74.3% coverage
    • 2 to 3 yr old–23,101,832 sq km, 77.3% coverage
    • 3 to 4 yr old–7,251,221 sq km, 24.3% coverage
    • 4 yr old and greater–29,824,053 sq km, 99.3% coverage
    • Total coverage–104,415,471 sq km
    • Total (approximate) area considered –29,875,960 sq km

EarthWatch Product Specifications

  • Accessible Geographic Regions: global (unless geo-fencing specifically requested by client)
  • Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 30-cm for other delivery mechanisms
  • Data Sources: primary = WorldView-2/3/4 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
  • Imagery Holdback Period For Updates: 90 day holdback for EarthWatch Standard; 2 day holdback for EarthWartch Premium; updates are to limited portions of the database, not the entire database
  • Data Accuracy: at least 8.5-meter CE90%
  • Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
  • Downloads & Streaming Limits: Standard = 4 gigabytes (GB) and up, annual license for downloads; Premium = 2 GB and up, perpetual license for downloads
  • Maximum Concurrent Users: unlimited!
  • Data Layers: Standard = standard image strips, +Vivid country-wide mosaics, and OSM and Google Maps vectors; Premium = standard, +Daily and First Look image strips, +Metro, +Vivid and Landsat mosaics, and OSM and Google Maps vectors
  • Pricing Model: Standard and Premium tiered annual pricing models with increasing download and streaming limits

For more information on the pricing and coverage available in DigitalGlobe’s EarthWatch, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.

The November 2018 temperature departure map shows pockets of cool weather across eastern North America–with pockets of record warmth over western Africa.
  • January 26th is Australia Day and in celebration of their national holiday, my Google search of the month was, “Australia and GIS.” If you check out the huge number of results you might find this extremely detailed paper by McCuaig et al where they explore the uranium resources of the continent using GIS. You might have to connect to this page using Facebook to download the article, apologies if you do not have an account to do this!
  • Last month we reviewed the GIS resources of Saint Paul, Minnesota and also unveiled our new GIS review format; and for this first review of 2019, we check out the second largest city in Mississippi, Gulfport.
    Gulfport, MS GIS Website
    Gulfport, MS GIS Contacts

    Gulfport, MS GIS Web Map
    Gulfport, MS GIS Map Collections
    Gulfport, MS GIS Direct Downloads – a fee schedule as you have to pay for actual GIS data

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

The radio broadcasted in the background: “We are entering an emergency preparedness situation. The region will get between 16-20” of snow in less than 24 hours. This warning should not be taken lightly. Make sure you have enough food and provisions to get you through 72 hours of citywide shutdown, and be prepared to lose power for just as long.” I smiled and laughed at their warnings. Having spent enough time in states that repeatedly get pounded with almost as much snow–and often welcome it–this was of no concern to me. But others, they were worried. We weren’t far removed from a couple of hurricane scares: the first was a false alarm that scared the city for no reason; the second we weren’t prepared for and it showed in the end. So, I was not being naïve, but I was standing my ground. Let the snow come and bury us. I’ll be just fine where I am.

Maybe I’m a bad driver? Or at least a dumb one.

The newspapers showed empty shelves in stores; I wasn’t sure if this was Cold War Era Soviet Union or the present. Everyone jokes around here that the first thing to run out in the stores at the sight or sound of any storm is bread and milk. I don’t drink milk any longer, and I’ve got two loaves sitting on my counter as I type. Maybe I can engage in some price gouging–highest bidder wins. We’ve had major dumps here before, though not the 16-20” they were calling for. Twice we’ve gotten 8-10” which shut down much of the city. I still went out, though, happy to have the streets and parks to myself. I never understood why people were so frightened by snowstorms, but I’ve certainly witnessed their dark side. You never want to be stuck out driving in a blizzard–or a tornado for that matter. I’ve done both (more than I’d like to admit). Not intentionally, of course. I was going and the storms were coming. Epic battles ensued.

Once I was driving from St. Louis, MO to Boulder, CO in early April right in the thick of a tornado somewhere in Kansas. I was one of the few people foolish enough to be out on the roads, but I didn’t care at the time. I just wanted to go home. There were random sheets of ice on the interstate and every once in a while I would hit one and my SUV would shoot forward or sideways, depending on the angle of its pitch. The wind and rain were fierce–I needed my windshield wipers on full blast, but that wasn’t fast enough to keep my view from being obscured. It didn’t matter anyhow: the wind held such power that it prevented my wipers from even touching my windshield, yet still I drove on and somehow lived to tell about it.

Another time I was driving from Boulder, CO to Keystone, CO for a concert on a Saturday night in January. I was almost there when I hit some black ice and slid off the road, somehow narrowly missing about a half dozen cars coming towards me at 45-50 mph. My SUV (the same one from the tornado) looked like it would come to a stop against a big mound of snow pushed to the side of the highway–then it didn’t. I was travelling just a little too fast in my slide and it caused me to “trip” over the snowbank, rolling my SUV, coming to a halt with the wheels in the air (the insurance company pronounced my vehicle DOA). I was un-phased, but I guess it looked pretty harrowing. I let myself out of the truck and walked towards the road just as people called to me to see if anyone was still alive. I assumed I was. I still made it to the concert…

Another time I was driving from Boulder, CO to SLC, UT through a late April blizzard. I’d always seen those highway signs on the gates that will close down I-80 or I-70 in the worst of storms. I was certain they’d closed behind me on this trip. I was taking the WY route and the snow was falling at 2-3” an hour, or so it seemed. I was in the fast lane, maybe going 45 mph when on any other day I would have been doing 85 mph. All of a sudden the semi-truck in the slow lane merged over quickly and without notice–the interstate had narrowed to one lane because of the snow accumulation. To avoid being sideswiped by the semi I had to put on the brakes, spinning myself out into the median, wedged into a drift that quickly piled around me. Somehow I still had cell phone service and was able to get through to highway patrol who radioed a tow truck. I sat and waited for what seemed like forever, watching the traffic pass me by, slowly. Suddenly the traffic stopped passing, but I could no longer see out the window anyways. I assumed those gates were indeed shut. After a few hours of sitting in the ditch, my savior arrived: a massive tow truck that looked like it could pull a house off its foundation idled to the side of the road. Some scrappy young buck hopped out and came to my window, told me to sit tight and he’d get me out. He did. I was quite thankful. He then asked me to wait up at the next rest-stop to collect payment; he had to turn his attention to another vehicle: a semi-truck that had jackknifed behind me; the reason the traffic had stopped. I made it to SLC, eventually, in one piece.

Another time I was leaving the Midwest and headed back to TX in early January after one of the most frigid storms on record. Temperatures had highs in the negative single digits for days and lows of 30 below–the windchill added to those perilous conditions. But again, like always, I had to get where I was going when I’d planned to be there. Nothing was going to stop me, surely not common sense. From the central plains on through Western KY, there were sheets and chunks of ice causing white-knuckle driving. My whole body was tensed up and it was a relief once I could feel the rubber on the road. I can recall a few other harrowing road trips in less than inclement weather, but I think you get my point: storms of any kind can be quite troublesome for those on the road. But if you’re able to stay at home, what’s the big deal? Some of us aren’t smart enough though, I guess…

I turned on the TV to hear the news and they were talking about the storm: “This could be one of the worst snowstorms the area has seen in decades. Do not, under any circumstances, leave the house unless it is an absolute emergency. First responders may not be able to get to you in time due to snow accumulation and expected issues with communication systems brought on by the storms.” Nevertheless, I’ll probably venture out, if for no other reason than to frolic in the snow, hopefully while it is still pristine on one of the trails. It’s funny how what is supposed to be so menacing can be at the same time so serene and peaceful. They called for snow and I responded, “Let it come.”

Marco Esquandoles
Chauffeur

We are excited to announce the release of our brand new ArcGIS plugin for Map Mavin. Now you can export your data layers directly from ArcGIS to Map Mavin with the click of a button. You’ve spent your precious time creating the perfect map, now you want to share it with the world. ArcGIS Online only allows you to export one layer at a time and doesn’t save the symbology. On top of that, your users need a pricey ArcGIS Online account to view the maps you make. Not with MapMavin! We believe that sharing data should be easy.

Whether the users are far away or don’t have expensive GIS software, you can use our plugin to export your data directly to a platform that quickly and easily shares maps with people around the world. Your users don’t need hours of training or a costly software license. Once you share your map, they can sign up for a free account and get down to business.

Why make things difficult when they can be easy? See what our new free ArcGIS to Map Mavin plugin can do for you.

Let’s get started. First, make sure you have your own Basic or Premium Map Mavin account set up and ready to go. Next, download our free plug-in from here. Make sure ArcGIS is closed before installing the application. Double-click on the plugin file and it will automatically install. When you open ArcGIS, you’ll see a new window pane on the right side of the screen. Click the Log in button at the top and enter the username and password for your Map Mavin account.

In ArcGIS, open the map you want to share on Map Mavin. Then, click on the Upload to Map Mavin button. All the layers in your map, along with their colors, will automatically upload to your layers tab in Map Mavin. The layers will also be added to a new map in your Maps tab. From here, you can share your map with anyone around the world.

It’s as easy as that! If you don’t believe me, try it for yourself. Sign up for a free 31-day trial and give it a whirl. What have you got to lose? Except maybe ArcGIS Online.

For the last Pléiades 1–SPOT 6/7 Stadium of the Month article of 2018 we checked out the site of a historic college football matchup on the East Coast, and for this first edition of 2019 we head to Texas for the site of a mid-season, high-stakes National Basketball Association (NBA) game between the Houston Rockets and the Los Angeles Lakers, i.e. the Toyota Center.


A 50-cm color image of the Toyota Center in Houston, Texas, USA collected on May 27, 2018 by Pléiades 1B; and then a 1.5-m SPOT 6 image of the same stadium collected on April 26, 2018. These images have custom processing and color balancing applied by Apollo Mapping. PLEIADES © CNES 2018, Distribution Airbus DS. SPOT © Airbus DS 2018.

About the Venue: Spanning six city blocks of Houston, Texas, the Toyota Center was designed by Morris Architects and opened during October 2003. At the request of the owner of the Houston Rockets–the NBA team that calls the arena home–it was buried some 32-feet below ground to reduce the number of stairs visitors had to climb to reach their seats. Built at a total cost of $235 million, Toyota bought the naming rights in 2003 for $95 million over 20 years. The Toyota Center features 18,500 seats for basketball games, 17,800 when used for ice hockey (as it was in the past) and 19,300 for concerts.

Fun Factoids: (1) The Toyota Center is site of a January 19th match-up between the Rockets and the Lakes, which will be the second time LeBron James and James Harden have matched up this season. (2) It took a massive amount of materials to build the arena, including 45,000 cubic yards of concrete, 350,000 masonry blocks and 650,000 square feet of drywall. (3) The Houston Rockets trace the roots of their name to 1968 when they were based in San Diego as a tribute to the rockets that were sending astronauts into the heavens during the great Space Race.

The Pléiades 1 High-Resolution Satellite Constellation

The Pléiades 1 constellation (or at least part of it!) has been in orbit since December 2011 and if you have not had a chance to check out any sample imagery, take a few moments and have a look at the gallery on our website. If you work with high-resolution imagery, you should consider Pléiades 1 for your next geospatial project.

A variety of Pléiades 1 products are available from both a growing archive and as a new collection, including 50-centimeter (cm) pansharpened imagery and 50-cm panchromatic–2-meter (m) 4-band multispectral bundles. We are happy to discuss the technical specifications, pricing and tasking options available with this satellite constellation.

The SPOT Medium-Resolution Satellite Constellation

The SPOT medium-resolution constellation consist of seven satellites launched from 1986 to 2014 with the most recent additions, SPOT 6 and SPOT 7, launching in 2012 and 2014 respectively. SPOT 6 and SPOT 7 are twin satellites offering 1.5-m panchromatic and 6-m 4-band multispectral data with a massive footprint at 60-kilometers (km) wide. For projects requiring recent archive coverage or rapid new collections of medium-resolution data, SPOT 6/7 should be one of your top imagery sources!

More sample images and technical information about Pléiades 1A and 1B can be found on our website here; while the same can be found here for the SPOT constellation and specifically about SPOT 6/7.

The Apollo Mapping sales team can answer any questions you might have about Pléiades 1 and/or any of the SPOT satellites. We can be reached at (303) 993-3863 or sales@apollomapping.com.

Do you have an area of interest that requires regularly updated imagery but you do not have time to check daily for this data?

Or perhaps you have a remote location that needs updated imagery but you cannot afford a new collection?

If either of these questions ring true, then you need to check our new Data Alert service on Image Hunter!

Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once this is set up, we check for new data over your area of interest every single day, and send you an email alert when we find coverage that meets your specifications.

We have a short YouTube video with directions to set up a Data Alert, check out the second video. We also have written directions for Data Alert here.

It’s that easy to find the data you need for all of your key projects.

If you would like to check out Data Alert, send us an email at sales@apollomapping.com or visit Image Hunter and click on the bell icon in the header to get started using this great service!