By now, we are guessing you have heard the news reported by DigitalGlobe about WorldView-4, if not check out the details here. Given that Apollo Mapping is a DigitalGlobe reseller and that both Katie and Brock worked at DigitalGlobe for a combined 5 years, we thought it would be good to offer an opinion on the possible loss of this 30-centimeter (cm) high-resolution satellite.
We always admired WorldView-4 imagery for its realistic colors–and in fact the same can be said about the images collected by GeoEye-1 (a distant sister satellite of WorldView-4, remember that GeoEye-2 was its original name). Here is one of our favorite WorldView-4 images we ordered during the past few years of working with this bird. It is a 30-cm image of the Oriental Pearl Radio & Television Tower in Shanghai, China collected on November 1, 2017 which has been enhanced by Apollo Mapping for improved clarity and colors. (Image Courtesy DigitalGlobe © 2019)To start off, we certainly hope this not goodbye, and it is just an extended break for WorldView-4–only time will tell us the answer here. But for the rest of this article, we will assume that WorldView-4 is not coming back online L
So you might be asking yourself now, what impact does the loss of WorldView-4 have on commercial satellite imagery clients? And well the answer is a smaller impact than you might expect at first. Keep in mind we have another 30-cm satellite in orbit now, WorldView-3, so that industry-leading high-resolution imagery will keep coming in fresh. Next, WorldView-4 was only an option for speculative tasking so there is little loss in 30-cm tasking capacity for our clients. The biggest impact will be the loss of archived 30-cm WorldView-4 images moving forward, which is definitely not ideal–that said, WorldView-4 has a relatively small commercial archive compared to WorldView-3 so again we can temper your expectations here. In the end, the loss of any satellite is a ‘tragedy’ when you are a reseller of imagery as is Apollo Mapping, but we will all be fine and the Sun will definitely rise tomorrow so fear not!
If you have any additional questions or concerns about the possible loss of WorldView-4, feel free to send us a note at sales@apollomapping.com.
In January we found ourselves deep in the heart of Texas for the Pléiades 1–SPOT 6/7 Stadium of the Month, and this month we head to the heart of the Midwest and the site of a crucial late-February Big Ten men’s basketball tilt between the University of Michigan and Michigan State University, i.e. the Crisler Center.


A 50-cm color image of the Crisler Center in Ann Arbor, Michigan, USA collected on May 25, 2018 by Pléiades 1A; and then a 1.5-m SPOT 6 image of the same stadium collected on the previous day, May 24, 2018. These images have custom processing and color balancing applied by Apollo Mapping. PLEIADES © CNES 2019, Distribution Airbus DS. SPOT © Airbus DS 2019.
About the Venue: Originally called the Crisler Arena when it opened in 1967 with construction costs of just $7.2 million, the Crisler Center’s name honors University of Michigan sports legend, Herbert O. “Fritz” Crisler, who served as both the football coach and athletic director over his 30 year career. Located on the southern edge of the University of Michigan campus in Ann Arbor, Michigan, “The House that Cazzie Built” started with seating for 13,684 fans and after three rounds of renovations in 1998, 2001 and 2012 the capacity is now 12,707. While we could not find the manufacturer of the wooden floor at the Crisler Center, we did find this detailed handling of wooden sports floor maintenance apparently made by the company that maintains the U of Michigan Maize and Blue floors.
Fun Factoids: (1) The Crisler Center is the site of the February 24th NCAA college basketball matchup between the U of Michigan Wolverines and the Michigan State Spartans–a matchup that could help to determine the first place finisher in the Big Ten. Oh and both teams are currently (as of January 16th) ranked in the top 10 of the nation in both the Coaches and the Associated Press Polls, this should be a fun one! (2) The Center is affectionately nicknamed “The House that Cazzie Built” in honor of Cazzie Russell who guided the men’s basketball team to three straight Big Ten championships from 1964 to 1966 as well as two consecutive Final Fours in 1964 and 1965.
The Pléiades 1 High-Resolution Satellite Constellation
The Pléiades 1 constellation (or at least part of it!) has been in orbit since December 2011 and if you have not had a chance to check out any sample imagery, take a few moments and have a look at the gallery on our website. If you work with high-resolution imagery, you should consider Pléiades 1 for your next geospatial project.
A variety of Pléiades 1 products are available from both a growing archive and as a new collection, including 50-centimeter (cm) pansharpened imagery and 50-cm panchromatic–2-meter (m) 4-band multispectral bundles. We are happy to discuss the technical specifications, pricing and tasking options available with this satellite constellation.
The SPOT Medium-Resolution Satellite Constellation
The SPOT medium-resolution constellation consist of seven satellites launched from 1986 to 2014 with the most recent additions, SPOT 6 and SPOT 7, launching in 2012 and 2014 respectively. SPOT 6 and SPOT 7 are twin satellites offering 1.5-m panchromatic and 6-m 4-band multispectral data with a massive footprint at 60-kilometers (km) wide. For projects requiring recent archive coverage or rapid new collections of medium-resolution data, SPOT 6/7 should be one of your top imagery sources!
More sample images and technical information about Pléiades 1A and 1B can be found on our website here; while the same can be found here for the SPOT constellation and specifically about SPOT 6/7.
The Apollo Mapping sales team can answer any questions you might have about Pléiades 1 and/or any of the SPOT satellites. We can be reached at (303) 993-3863 or sales@apollomapping.com.
In this monthly feature, we span the globe to examine Our Changing Landscape with a time series of medium resolution RapidEye satellite imagery. The RapidEye archive dates back to late 2008 and already contains more than 14 billion square kilometers of data. Last month we checked out seasonal changes on the world’s tallest peak, and for the February edition of Our Changing Landscape we check out urban growth in Northeast Denver, Colorado, USA.
The RapidEye Constellation
RapidEye is a constellation of five 5-meter (m) medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers daily revisits to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a starting cost of $1.28 per square kilometer for all five spectral bands–academics do receive discounts. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data in the red edge band allows users to extract more useful land ‘information’ than can be from traditional 4-band imagery sources. When RapidEye imagery is ordered as a Level 3A Orthorectified product, images from multiple dates are extremely well registered, making it the ideal data source for Our Changing Landscape.
Click on the image above to see an animation of 5-meter natural color RapidEye imagery collected over northeast Denver, Colorado, USA on June 22, 2009, July 29, 2012, June 20, 2015 and August 16, 2018. What you might notice first is how dry the July 2012 image appears compared to the other dates–this year was a particular extreme drought along the Front Range. If you look at the center of the images as well as the park area in the north, you will see several new neighborhoods spring into existence as well as a bunch of smaller commercial buildings. This time series confirms that northeast Denver is in fact growing rapidly! (Images Courtesy: © Planet 2019)Urban Growth in Northeast Denver, Colorado, USA
Having lived in Colorado for the past 19 years, I (Brock writes this article series) have seen the Denver metro area explode from a quiet cow-town to a bustling metropolis. In fact, Colorado has added 700,000 residents since 2010 (or 13.2%), making it the fourth fastest growing state in that time frame. When considering the Denver metro area, in 1990, the population stood at 467,854, while the most recent census estimates place the July 2018 population at some 704,621 resident. While Denver grew at a 1.4% rate from July 2017 to July 2018, that was well below the peak growth rate of nearly 2.8% in 2015.
Drilling down on the Denver metro area, the Northeast part of town is one of its fastest growing regions, with the neighborhood of Montbello achieving national recognition for its explosive growth. One part of town that I have seen grow up over the years is the redeveloped neighborhood of Stapleton. Once the site of an international airport which was decommissioned in 1995, since that time the planned neighborhoods have spread across the map with the final installment, the North End, recently completing its buildout. With some personal interest invested in this Our Changing Landscape, it is time to check out the 5-meter RapidEye archive to see the march of urban growth across the landscape of Northeast Denver.
If you would like to find out more about using RapidEye for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.
This map shows the areas imaged by the Pléiades 1 constellation from June 1 to August 31, 2018 over Europe and its islands, minus Russia. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high-resolution satellite constellation, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.
Graphic Region of Interest: Europe and associated islands minus Russia
Land Mass Covered: 5,966,899.4 sq km
Time Period: June 1 to August 31, 2018
High-Resolution Satellite Constellation: Pléiades 1 (i.e. Pléiades 1A and 1B)
Pléiades 1 Constellation Imaging Statistics–Europe Minus Russia
Total Area Collected: 7,593,681.3 sq km; 41,270.0 sq km per satellite/per day
Area Collected @ 20% or Less Clouds & 30 Degrees or Less Off-Nadir: 4,217,390.5 sq km; 22,920.6 sq km per satellite/per day; 55.5% of total
We are excited to announce the release of our brand new ArcGIS plugin for Map Mavin. Now you can export your data layers directly from ArcGIS to Map Mavin with the click of a button. You’ve spent your precious time creating the perfect map, now you want to share it with the world. ArcGIS Online only allows you to export one layer at a time and doesn’t save the symbology. On top of that, your users need a pricey ArcGIS Online account to view the maps you make. Not with MapMavin! We believe that sharing data should be easy.
Whether the users are far away or don’t have expensive GIS software, you can use our plugin to export your data directly to a platform that quickly and easily shares maps with people around the world. Your users don’t need hours of training or a costly software license. Once you share your map, they can sign up for a free account and get down to business.
Let’s get started. First, make sure you have your own Basic or Premium Map Mavin account set up and ready to go. Next, download our free plug-in from here. Make sure ArcGIS is closed before installing the application. Double-click on the plugin file and it will automatically install. When you open ArcGIS, you’ll see a new window pane on the right side of the screen. Click the Log in button at the top and enter the username and password for your Map Mavin account.
In ArcGIS, open the map you want to share on Map Mavin. Then, click on the Upload to Map Mavin button. All the layers in your map, along with their colors, will automatically upload to your layers tab in Map Mavin. The layers will also be added to a new map in your Maps tab. From here, you can share your map with anyone around the world.
It’s as easy as that! If you don’t believe me, try it for yourself. Sign up for a free 31-day trial and give it a whirl. What have you got to lose? Except maybe ArcGIS Online.
Launched in late 2016 (and relaunched in mid-2018), Map Mavin is our pay-as-you go GIS cloud that lets users make unlimited public and password-protected web maps. Once you upload your vector and raster files to our secure Amazon cloud, you are ready to make and share your web maps in minutes–just like this demo web map we made with vectors and a base layer TIFF from Boulder, Colorado.

If you are using point layers in Map Mavin, check out our new point density mapping tool in the Styles section of the Layer Editor GUI!
And with our Screen Share function, you can link up with users all around the world to collaborate on a map in real-time. Picture a live webex in your mind but just based around a map that moves and changes as the members of your team update information. Imagine the possibilities of working in real-time with a team of collaborators around the world without any GIS knowledge required!
Priced at just $35 per month with a free trial month, there is no other cloud-based GIS on the market that can compete with Map Mavin on price. For your $35 per month, you are able to store up to 5 gigabytes (5GB) as well as make and share unlimited web maps. As an added bonus, you can cancel your monthly contract at any time.
February 2018 Product Updates
In the past month, we released Map Mavin updates that included but were not limited to the following list of additions and/or enhancements:
- Added select by location to web maps
- Upload geodatabase attachments with the ArcGIS-to-Map Mavin plugin
- Added ability to download selected features to GeoJSON
- Brought back the more simple search function
- Added point density mapping
- Advanced sizing of clusters for point data
- Added more than 3,000 new layers to the Data Catalog
You can find a full list of our recent changes and bug fixes here. And please stay tuned to this series where we will let you know about the most exciting Map Mavin changes released in the past month.
If you have an improvement or feature addition you would like to add the Map Mavin product road map, let us know by email at support@mapmavin.com.
Are you interested in trying out Map Mavin? If so, you can sign up here. Or maybe you would like a live demo of the product before you sign up? If so, send us an email at support@mapmavin.com and we will get one scheduled right away!
Have you checked out Image Hunter recently?!?! If not, you should!
Listening to the feedback we received on improving imagery search engines over the years, the new version of Image Hunter features a major overhaul to the user interface as well as to the backend architecture. Image Hunter is now built on open-source technology so now it works on all computers, not just on Windows machines. We slimmed down the user interface to make it easier to find the imagery filters and other available tools. All things said, we really think you will enjoy your browsing experience–plus no other search engine even comes close to the breadth of satellites offered in Image Hunter!
Key February 2019 Improvement(s)
The Holidays are over and we are back at it! Omer has been busy over the past few weeks working on implementing the changes below–we are also working on adding in two new imagery datasets, and we hope to have them live in the next month or so!
- Fixed Formosat-2 previews
- Brought back Landsat 7 updates
- Added persistent search URLs to submission emails
- Fixed several polygon loading errors related to special characters
Data Alert–An Automated Daily Imagery Search
We launched our highly anticipated Data Alert service in mid-2015 and it’s a hit! Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once an alert is set up, we check for new data over your area of interest every single day, and send you an email when we find coverage that meets your specifications. We have a short YouTube video with directions to set up a Data Alert, check out the second video; and we have written directions for Data Alert here.
The Satellites Available in Image Hunter
As you might have seen in past articles, we now feature hourly updates (seriously!) of GaoFen 1/2, GeoEye-1, KOMPSAT 2/3/3A, Pléiades 1, SPOT 6/7, SuperView-1, TripleSAT, WorldView-1/2/3/4 and ZiYuan-3!
Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite imagery on the market today, including:
- Worldview-4
- WorldView-3
- WorldView-2
- WorldView-1
- QuickBird
- GeoEye-1
- IKONOS
- EROS B
- KOMPSAT-3A
- KOMPSAT-3
- KOMPSAT-2
- Pléiades 1 constellation
- Deimos-1
- Deimos-2
- TripleSat
- SPOT 1 to 7 constellation
- RapidEye
- GaoFen-2
- GaoFen-1
- ZiYuan-3 01/02 (mono and stereo!)
- Formosat-2
- ALOS PRISM (stereo)
- AW3D Standard (DEM)
- SkySat constellation
- SuperView-1 constellation
- Landsat 1-8
- TeLEOS-1
Key Features of Image Hunter
If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide image previews, then Image Hunter is the solution to your woes as it features:
- Online browsing of satellite imagery from 10 plus data providers and over 30 satellite systems.
- Near-instantaneous loading of low-resolution preview imagery with collection date, cloud cover and other key metadata.
- The ability to define your area of interest by address, coordinates, geometric shape or shapefile/KMZ.
- A responsive basemap with street names to provide spatial context when discovering data as well as crowd-sourced updates for the most accurate map possible.
- Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
- Support for all operating systems, and not just our friends with Windows machines!
Image Hunter can be accessed here all-day and all-night, we are excited to find out what you think about our imagery search engine! So if you have any ideas and/or feedback to improve Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.
Do you have an area of interest that requires regularly updated imagery but you do not have time to check daily for this data?
Or perhaps you have a remote location that needs updated imagery but you cannot afford a new collection?
If either of these questions ring true, then you need to check our new Data Alert service on Image Hunter!
Data Alert lets you define an area of interest anywhere around the globe, the resolution your project requires and the number of months we should keep the alert active. Once this is set up, we check for new data over your area of interest every single day, and send you an email alert when we find coverage that meets your specifications.
We have a short YouTube video with directions to set up a Data Alert, check out the second video. We also have written directions for Data Alert here.
It’s that easy to find the data you need for all of your key projects.
If you would like to check out Data Alert, send us an email at sales@apollomapping.com or visit Image Hunter and click on the bell icon in the header to get started using this great service!

