


We have had the chance to check out many high off-nadir images of cities but never of a rural area–so we had to change that this month! This high off-nadir image was collected over one of Aspen, Colorado’s four mountains, Snowmass. Featuring a resolution of about 57-centimeters, you can see Snowmass in all of its fall glory on September 25, 2016 as the aspen groves have started to turn yellow–and there is even a bit of snow in the highlands. These WorldView-3 images have been resampled and enhanced by Apollo Mapping for improved colors, clarity and perspective. (Images Courtesy: Maxar)
Every time we look at WorldView-3 and WorldView-4 (WV3/4) imagery, we are blown away. And we hope you are equally impressed with the data! In October we checked out an image of the 2018 US Open in progress in Flushing Meadows, New York, and for this 30-cm Color WorldView-3/4 Image of the Month we return to our recent obsession with high-off nadir images, this time of Snowmass, Colorado during the fall.
PLEASE NOTE: Effective May 2016, WorldView-3/4 prices dropped again! Are you interested in finding out more about these price drops? If so, send us an email at sales@apollomapping.com.
WorldView-3 launched in late 2014 and WorldView-4 launched in late 2016; taken together they are the most advanced satellite constellation the commercial marketplace has ever had access to. Here are a few of the features that really set these satellites apart from the competition:
- Improved Resolution
- Higher resolution means you can see more detail in WV3/4 imagery.
- Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m SWIR (WV3 only) and 30-m CAVIS (WV3 only) bands.
- At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m shortwave infrared.
- Additional Spectral Bands
- If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; and 8 shortwave infrared bands which are crucial for geological studies.
- Better Positional Accuracy
- With accuracies of 3.5-m CE90% or better (without ground control even!), WV3/4 has no rivals for its enhanced positional accuracy.
- Daily Revisits
- At 40 degrees latitude, WV3 is able to image every location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
- WV4 is no longer collecting new imagery.
- Increased Collection Capacity
- WV3/4 feature 13.1-km swath widths (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day per satellite (though WV4 is dead now).
- Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.
If you are interested in WorldView-3 and/or WorldView-4 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.
You can also find more WV3 samples and technical information on our website here and then WV4 samples and information can be found here
- This snippet section is always my favorite to write each month so without delay, let’s jump into my monthly tech review!
Low-cost stretchable batteries make steps forward.
This idea produces renewable energy from temperature differences created by cold night skies.
Futuristic salt-based propellant makes strides.
Indoor solar cells could power your future electronics.
Research could reduce the amount of rare earth elements in touchscreens.
Algae and bacteria work together to improve energy production.
First twistable battery invented.
Wind power production is more sustainable with recycled rare-earth elements.
The September 2019 NOAA temperature departure map shows pockets of record warmth on all continents other than Europe with some cooler pockets in central and south-east Asia.- It’s November so that means it is time for the September NOAA Global Climate report, and if you guessed it was warm last month, you win a prize! Well no not really, but here are some of the climate ‘highlights’ of September 2019: the warmest September on record, tying 2015; 14th hottest month on record; and the 417th consecutive month above the 20th Century average temperature. As the warming continues, the Trump administration would prefer to weaken regulations around lead pipes, sad…
- Did you know that November 10th is Sesame Street Day? And so in honor of this children’s TV show classic, my Google search of the month was, “Sesame Street and GIS.” Wouldn’t you know it, we actually got a hit! Check out this poster by Penn State University student Julie Coons who uses a Sesame Street map to illustrate their use in children’s literature. The internet has it all J
- We finally got back on track last month when we check out the GIS website of Raleigh, North Carolina, and will go on a streak of two quality GIS sites when we review North Dakota’s second largest city’s resources, i.e. Bismark?!
Bismark, ND GIS Website
Bismark, ND GIS Contacts
Bismark, ND GIS Web Map
Bismark, ND GIS Map Collections (yep, same link as above)
Bismark, ND GIS Direct Downloads
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com
In this edition of Free for All, rather than providing you with a useful tool or website, we address how one can do their part to save the planet, for free! There are a multitude of different approaches to fight Climate Change, so inevitably, there will be some that I do not cover, so we invite you to do your own research and learn as much as you can from reliable sources. For example, check out scientific literature that has been reviewed by multiple experts so that you know it’s valid. Once you absorb the information, share it with your friends and family, as every person that becomes educated then becomes an activist!

Here are two easy-to-read pie charts showing the key greenhouse gases and then the sectors that emit them.The solutions I offer below are ordered by the impact they can make on Climate Change, so without delay, let’s jump in. While it can be hard to hear, changing our diet is one of the most impactful actions we can take to improve the climate. While carbon emissions are a key contributor to the greenhouse effect, as an individual it is tough to reduce many of these emissions as they are a result of our industrial and consumer-based culture. Eating more meat-free meals with locally sourced, or self-grown ingredients, is a fantastic way to lessen your footprint. In case you didn’t know, methane is the gas that is released by landfills, the natural gas industry and agriculture (particularly from ruminants such as cattle), and it is over 84 times more potent than carbon dioxide. Nitrous oxide is also a byproduct of industrial agriculture, and it is 264 times more powerful than CO2. Buying and eating more vegetables rather than meat will have an immediate impact on both the environment and your wallet, since meat is often significantly more expensive than plant-based proteins.
The next best way to save money while fighting climate change is rethinking your transportation choices. In other words, rethink your driving practices, including how often you drive (try walking or taking public transportation when you can), the car you drive (consider a hybrid, electric only or at least a 4-cyclinder compact car), and how you drive it (when you drive, slow down, accelerate smoothly and avoid stop and starting constantly). Other ways to save energy and reduce fossil fuels use include using energy-efficient appliances, opting for renewable energy (solar panels for houses or electric/hybrid cars), and being responsible with daily activities such as sealing windows or lowering your thermostat. The less energy you waste, the more money you save, whether it be on gas or electricity.
While I’ve covered a few ways you can directly impact climate change, there are also several ways to indirectly impact it. For starters, get involved in politics to elect environment-minded representatives and participate in public demonstrations to disseminate information. Even starting conversations with friends and joining local climate marches can have important long-lasting impacts. Money talks so try investing your hard-earned money in renewables and low-impact industries rather than in extractive industries like oil and gas or mining.
In sum, it is important to stay informed, change your daily habits and participate in politics if you maximize your positive impact on our planet!
Jake Zatz
Social Media Guru
Growing meat in a lab is not a new concept. A handful of companies are working to perfect the process. Using a couple of host cells and mimicking natural muscle-tissue growth, they are able to grow meat from just a few cells. Now, it’s been done for the first time in space.
Aleph Farms, an Israeli food company, announced the first successful lab-grown meat in space on the International Space Station. They collaborated with 3D Bioprinting Solutions, a Russian company, and two US food companies to run their experiment. In microgravity, printing cells is actually more effective. On Earth, the cells are flattened and need to be layered, one at a time, to build up the muscle tissue. In space, the tissue is printed in all directions, simultaneously. They don’t need a support structure since they only cling to each other.
In terms of space travel, printing meat solves some logistical limitations. Transporting cows in space is far from feasible, but protein is necessary. The alternative to Martian cows is the less appetizing prospect of farming insects as a protein source. Yummy.
Aleph isn’t printing meat in space just to explore the universe. If they can print large quantities of food in space, where it is more efficient, and send it back to earth for consumption, they can help reduce people’s reliance on cattle. Animal farming consumes significant quantities of energy and water, with byproducts like methane. Meat consumption is a driver of climate change. Aleph wants to help preserve the only habitable planet we have.
Growing meat in a lab still uses energy, but less than the conventional meat industry and much of that need can be pulled from alternative energy sources. No more feeding cows for years before transport, slaughter and processing. What takes years now could be done in a few weeks with space printing.
The ISS is also reducing its waste using a new Plastic Recycler. Scheduled for delivery in November, the recycler will turn waste plastic into feedstock for the 3D printer. This will close the loop on plastic waste on the ISS. Sending tools into space and returning them to Earth is laborious, wasteful and expensive. The 3D printer allows astronauts to create many of the tools they need. Now with the recycler, when that tool is superfluous, it is recycled back into the printer. Reducing astronaut’s reliance on Earth gets us one step closer to long-term space exploration.
This map shows the areas imaged by the WorldView-2/3 constellation from January 1, 2019 to March 31, 2019 over South America. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high-resolution satellite constellation, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.
Graphic Region of Interest: South America plus off-shore islands
Land Mass Covered: 17,750,994.2 sq km
Time Period: January 1, 2019 to March 31, 2019
High-Resolution Satellite Constellation: WorldView-2/3
WorldView-2/3 Constellation Imaging Statistics–South America
Total Area Collected: 8,828,802.7 sq km; 49,048.9 sq km per satellite/per day
Area Collected @ 20% or Less Clouds & 30 Degrees or Less Off-Nadir: 2,126,100.3 sq km; 11,811.7 sq km per satellite/per day; 24.1% of total
Do you have the need for regularly updated images of locations around the world?
Perhaps you need imagery to integrate with an OEM solution you are developing?
Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?
If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s EarthWatch (formerly called Global Basemap or GBM).
With EarthWatch, you have access to millions of square kilometers of streamed imagery with low cloud-cover and off-nadir angles. This data is accessible in web-mapping services and in an online viewer. Perhaps the most important feature of EarthWatch are the regular streaming updates you can receive as out-dated imagery is often of little or no use to our valued clients.
And if the EarthWatch streaming database lacks the coverage you need, Premium users are now able to download any image from the entire DigitalGlobe archive in a wide variety of formats!
November 2019 Product Update
The available DigitalGlobe EarthWatch imagery over Africa by location and with the most recent coverage date indicated with varying colors. In the vast majority of locations, there are multiple imagery dates available.In the past month, EarthWatch pricing was revised so that it’s more flexible with data buckets sold in gigabyte (GB) increments. The minimum order has not changed but now you are able to purchase the exact number of GBs you might need in a year as opposed to fixed increments. Further, a Streaming only model was added with pricing based on the number of users. Send us an email at sales@apollomapping.com to find out more about these changes!
Last month we took a look at the coverage in our off-the-shelf mosaic product known as Vivid, and for our November EarthWatch check-in we head to Africa. Sometimes the scale of the continent is lost on maps, so keep in mind that Africa is over three-times as large as North America; so to have more than 75% of it covered in imagery from the past year, well that’s darn impressive! As you might expect, the coastal and dry areas of Africa tend to have more recent coverage than does the central rainforest region. Here is a more detailed summary of the EarthWatch coverage over Africa by year:
- Africa EarthWatch Coverage By Year
- Less than 1 year (yr) old–22,542,909 sq km, 75.40% coverage of Africa
- 1 to 2 yr old–23,359,745 sq km, 78.13% coverage
- 2 to 3 yr old–23,768,414 sq km, 79.50% coverage
- 3 to 4 yr old–21,826,365 sq km, 73.01% coverage
- 4 yr old and greater–27,600,999 sq km, 92.32% coverage
- Total coverage–119,098,432 sq km
- Total (approximate) area considered–29,897,165 sq km
EarthWatch Product Specifications
- Accessible Geographic Regions: global (unless geo-fencing specifically requested by client)
- Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 30-cm for other delivery mechanisms
- Data Sources: primary = WorldView-2/3/4 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
- Imagery Holdback Period For Updates: 90 day holdback for EarthWatch Standard; 2 day holdback for EarthWartch Premium; updates are to limited portions of the database, not the entire database
- Data Accuracy: at least 8.5-meter CE90%
- Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database/downloads and online portal
- Annual Downloads & Streaming Limits: Standard = 4 gigabytes (GB) and up, annual license for downloads; Premium = 2 GB and up, perpetual license for downloads
- Maximum Concurrent Users: unlimited!
- Data Layers: Standard = standard image strips, +Vivid country-wide mosaics, and OSM and Google Maps vectors; Premium = standard, +Daily and First Look image strips, +Metro, +Vivid and Landsat mosaics, and OSM and Google Maps vectors
- Pricing Model: Standard and Premium tiered annual pricing models with increasing download and streaming limits; also a Streaming only annual model based on seats
EarthWatch Direct Archive Download Specifications
Premium EarthWatch users are able to download high-resolution satellite imagery from the entire DigitalGlobe archive in a variety of formats. Here are some details on this exciting offering:
- Available Data Sources: entire commercial archives of GeoEye-1, IKONOS, QuickBird and WorldView-1/2/3/4 (SWIR included too!)
- Annual Downloads Limits: 2 GB and up; metering combined with streaming usage
- Product License: internal use and perpetual
- Product Resolution: maximum resolution for each satellite
- Product Formats: all standard types are offered including, orthoready, stereo, basic, 4-band bundle, 8-band bundle, ACOMP on, etc.
For more information on the pricing and coverage available in DigitalGlobe’s EarthWatch, you can reach our sales team anytime at sales@apollomapping.com or during typical American business hours at (303) 993-3863.
Vricon is excited about Thailand this month, too!
Maxar’s GeoEye-1 image provides terrific detail and context to better understand the history and traditions surrounding this year’s coronation. So, how can Vricon data help make this better? By adding elevation.
With unique access to the Maxar archive, Vricon employs multiple images over Bangkok to create a 3D digital elevation model (DEM) of the city. You’ll quickly recognize the relative densities and heights of Bangkok’s urban landscape. And, with their 3D you can even change view points to “see” the contrasts from block to block.
Explore Bangkok by using Vricon elevation models available today! Every month, Vricon adds new areas to its Globe in 3D, providing users with 50-centimeter or 5-meter DEMs–available as both digital surface models (DSMs) and digital terrain models (DTMs)–with absolute vertical and horizontal accuracy of 3-meters in every direction.
Why on earth would Vricon use old images to create current elevation products?
How well do you know that spot or location on the surface of the Earth? Have you looked at just one pixel at a time? Maybe a few hundred pixels at at time, just enough to fill your screen? Just how accurate is one pixel, when you could be leveraging so many more?
Vricon’s approach is different — they use hundreds to thousands of images and millions of pixels to create their Digital Surface Models, Digital Terrain Models and textured 3D Surface Models. The company has unique access to the world’s largest commercial archive of satellite imagery dating back to 2001. Vricon uses all the pixels associated with a single point on the ground to create its 3D Surface Model. Vricon then derives their DSMs and DTMs from the 3D Surface Model to ensure accuracy and perfect alignment.
Vricon’s technology is a combination of multi-view photogrammetry and big-data processing; hence the more images of a location, the more accurate the models are in every direction, be it X, Y or Z. And the results? The most accurate representation of the Earth possible. Users can look at a spot on the ground from any direction or angle and see a geo-specific model no matter the surface or terrain type.
Our question is this: why wouldn’t Vricon use all the imagery available if it provides the most accurate representation of today’s earth?
For more information on Vricon DEM coverage including pricing and availability, send us an email at sales@apollomapping.com!

Click on the image above to see an animated views comparing 2.5-m and 5-m AW3D DEMs over Boston, Massachusetts and Washington, D.C. (C)NTT DATA, RESTEC, Included JAXAIn conjunction with our valued partner, NTT DATA, we are proud to offer 2.5-meter/5-meter (m) AW3D Standard DEM products from an archive covering more than 80% of the world. As an added bonus, you are able to search for AW3D Standard in Image Hunter, making this DEM fast to query, order and deliver.
Produced from an archive of more than 3 million ALOS stereo images, AW3D Standard can be delivered as either a digital surface model (DSM) or a digital terrain model (DTM) at 2.5-m and 5-m resolutions. With average delivery times of 3 weeks or less (even for a DSM), there is no high-resolution elevation model on the market we can get to you quicker.
Here is a summary of the current AW3D Standard specifications which will be updated in the coming months when more testing is completed on the new 2.5-m DEM offering:
Resolution: 2.5-m (also offered at 5-m for a reduced price)
Date of ALOS Images Used: 2006 to 2011
Horizontal and Vertical Accuracy: 5-m LC90 and LE90, or better
Product Levels: level 1 DSM (raw data); level 2 DSM (voids infilled); level 2 DSM (standard); level 3 DTM
Average Delivery Time: 2 to 4 weeks
If you have any pricing requests or additional questions about AW3D Standard DEMs, send us an email at sales@apollomapping.com.
