Dioxins are by-products of industrial processes that are commonly regarded as highly toxic and are environmental pollutants. Their toxicity levels range greatly due to the broad class definition, but they are considered to play major roles in reproductive and developmental problems in humans. They interfere with hormones and have been known to cause cancer as well. Most intakes of dioxin-like chemicals are from food of animal origin; and countries in the Western world, like the United States, often have the highest measured rates of dioxin levels in humans due to their animal-centric diets.
A group of researchers at the Regional Public Health Office in Vejle, Denmark have looked at the role dioxins play in airborne pollution and their link to cancer. They found three methods with which to identify at-risk populations: physical monitoring, environmental monitoring and mathematical modeling. Focusing on the town of Kolding, Denmark in the southern part of the Jutland peninsula, the researchers identified three outlets of dioxin emission, all through chimneys. Knowing the physical location of these sites, they were able to build a computer simulated exposure model using GIS which patterns the effect of the smokestacks’ reach and their impact on the local population.
The air pollution simulation model assessed hourly emissions of airborne pollutants coupled with meteorological and terrain data to better establish patterns of airborne dioxin dispersion. The Danish researchers modeled a 13 year period from 1986-1998, and then compared these results to health reports of the population in the study area. Denmark has kept very stringent medical records on its population since 1968 so all recorded cases of malignant cancer from the study area (except skin cancer) were documented. The study area was broken up into three zones based on the levels of measured airborne dioxins.
At the start of the study, there were 15,000 residents in the focus area, and during the course of the study a total of 46,000 people lived in the focus region. Upon conclusion of the study and data analysis, there was no disproportionate level of cancer found in any of the three focal zones. The levels of dioxins were still of alarm to Danish officials, and thus steps were taken to clean the emissions to reduce dioxin levels. Their key concern was that as airborne dioxins are absorbed into soil and vegetation, they could build up over time and cause future health issues.
In a follow-up study, the highest levels of dioxins were measured in 2000. At this point, the Danish Cancer Register decided to look at occupants of the three zones on a long-term basis to see what, if any, effects the recently increased levels of toxins had on cancer rates in the human population. There are plans to continue the use of GIS in tracking dioxin dispersion; and possibly to extend its use to track population relocation from the affected areas, and to measure cancer rates of former residents as compared to rates of those who have not lived in these impacted areas.
While the current study has not found any noticeable differences in cancer levels due to airborne dioxins, the effects of industrial pollution loom largely over our personal and environmental health. Many other pollutants that are released in industrial manufacturing and production can cause severe health problems. Toxins like sulphur oxides, nitrogen oxides and particulate matter have all been shown to be causes of disease and environmental ruin. The steps the Danish are taking will hopefully provide us with more information on how to lessen our footprint while still maintaining a high level of productivity in this growing world.
Justin Harmon
Staff Writer
The amount of free geospatial data that can be found online via streaming sources is almost overwhelming.
A quick search of the web will reveal thousands of sources Open Geospatial Consortium (OGC) compliant Web Mapping Services (WMS) which can integrate with geospatial software packages such as ArcGIS to create an interactive basemap for all your projects. My favorite collection of public OGC-compliant WMS feeds is maintained by Skylab Mobilesystems Ltd. and can be found here. This website contains links to nearly 1,000 WMS servers offering more than 339,000 layers!
Instead of spending the rest of this Free For All! listing my favorite WMS feeds, I thought it would be more valuable to walk you through adding a WMS feed to ArcMap 10. For this example, I utilize the World Mineral Deposits WMS feed:
- Go online and copy the address of the WMS feed you want to bring into ArcMap. I used this URL: http://132.156.97.59/cgi-bin/worldmin_en-ca_ows?request=GetCapabilities
- In ArcMap, use the top-of-the-screen menu options and click on, FILE → Add Data → Add Data
- From the Home Add Data screen, double-click on “GIS Servers”
- From the GIS Servers Add Data screen, double-click on “Add WMS Server”
- From the Add WMS Server screen, copy the address you found in step 1 into the URL: field
- If applicable, enter the Username and Password at the bottom of the Add WMS Server screen
- After a few seconds, the Add Data screen will appear again with the name of the WMS server added to the list
- Click on the new WMS server that has been added to the Add Data screen; it will take several double-clicks to do this
- You can add the entire stack of WMS layers with the Add button when it is highlighted; or you can use double-clicks to scroll into the WMS feed and Add only the layers you are interested in
As a quick FYI, OGC is consortium of public and private agencies that establish standards for geo-enabled web, wireless and other IT products/solutions.
Brock Adam McCarty
Map Wizard
(720) 470-7988
High-resolution imagery captured by satellite and aerial platforms over time helps decision makers quickly see precise changes on the ground.
The Project Subscription Bundle is a combination of products and services which provides the Engineering & Construction market with access to timely, accurate imagery for the life of a project. Imagery is delivered through GeoEye’s EyeQ online access service, allowing the entire project team to view, search and share the most recent imagery related to a project.
GeoEye provides access to current, high-resolution imagery throughout the life of the project–from pre-bid to project hand-off. Accurate, current imagery yields better insight, which leads to improved, cost-effective site planning and business decision making. The most up-to-date imagery for a project helps to identify risks and liabilities and to reduce loss margins. Enterprise access and sharing, from the project manager to the on-site contractor, ensures that everyone has the most current project data and imagery. Quarterly, semi-annual or annual imagery updates yield better project insight and management.
Project Subscription Bundle Features
The Project Subscription Bundle includes a portfolio of GeoEye products and services:
- High-resolution imagery–map-accurate, 1-meter resolution imagery from new collections and archive
- Online access to project imagery–hosted in EyeQ allowing project managers to search, organize and disseminate imagery across the enterprise
- Imagery updates–customer-defined collection frequency (monthly, quarterly and annually)
EyeQ enables access to secure, timely and accurate geospatial imagery combined with on-demand tools for managing geospatial information and project-based collaboration. With EyeQ, users can search, organize and share geospatial data. By hosting the data and providing an easy-to-use user interface, EyeQ allows non-technical as well as advanced users to interact with geospatial data.
If you would like to find out more about GeoEye’s streaming EyeQ service and the bundles offered through it, please contact us at sales@apollomapping.com or at (303) 993-3863.
As part of DigitalGlobe’s ongoing effort to fulfill the geospatial needs of their clients, we are proud to announce the release of a suite of elevation data products, referred to as the Advanced Elevation Series (AES). Utilizing their constellation of two 50-centimeter WorldView satellites, DigitalGlobe is able to offer a global solution to a historic challenge in the geospatial world–i.e. access to high-quality, recent and reasonably priced elevation data for nearly any location on the planet. There are three product levels offered in the AES, each with differing resolutions, accuracies and price points to meet the specific needs of your project. Further, DigitalGlobe offers both a digital surface model (DSM) where human-made and natural features such as buildings, cars, trees, etc. are present in the elevation data; and a digital terrain model (DTM) where these obstructing features are removed.
In this piece, we would like to give our readers a sense of the entry level AES product–i.e. the 8-meter Mapping elevation model–and how it compares to the various sources of free data that can be found online. In the first animation below, we have prepared a stack of elevation data from southern Germany that has been displayed using the same color ramp. In this color ramp, the lowest areas are in red and the highest are in green. The first image is free 90-meter (m) SRTM data which can be downloaded from a variety of US and international government website (for instance here). The second image is also free data but this time 30-meter ASTER GDEM data which can be downloaded here once you register. The final image is a sample of the entry level Mapping DSM from DigitalGlobe with 8-meter resolution. In the second animation, we have used the same datasets but this time displayed each as a ‘hill shade’ so that elevations are more visually apparent. In both of these animations, you can see the level of detail in the Mapping DSM which you simply cannot get in the free sources we all know and use online.
Priced below many other choices with global coverage, DigitalGlobe’s AES elevation suite is the ideal solution for:
- Regional studies which require an analysis of elevation.
- Academics in need of a reasonably-priced solution to replace dated and low resolution public sources.
- Engineers looking to replace costly field labor in distant lands.
- More accurate orthorectification, particularly in areas of high topographic change.
In next month’s Geospatial Times, we will feature another piece on the AES product series where we define product specifications and minimum order sizes. If you would like more information about this new elevation dataset before next month, you can send requests to sales@apollomappping.com or call us at (720) 720-7988.
In this short piece, the Apollo Mapping team would like to introduce you to the value offered by RapidEye’s 5-meter medium resolution satellite imagery with its 5 spectral bands. The RapidEye constellation of 5 satellites offers daily revisit time to every location on the planet with a huge footprint that is 40-km wide. The data is priced extremely competitively with a base price of $1.28 per square kilometer–academics do receive discounts on this price–for all 5 spectral bands. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The red edge has been found to be particularly useful when studying vegetative health and stress.
For the animation below, we calculated a Red Edge Normalized Difference Index (NDVI) to show the health of vegetation when this RapdiEye data was collected over San Luis Valley in Colorado. A NDVI can reveal patterns of plant health that may not be apparent in natural color imagery. The scientific rationale behind a NDVI is predicated on the presence of chlorophyll in healthy plant vegetation. In a vigorous, healthy plant, chlorophyll is busy absorbing the sun’s energy in the red band and converting this into the sugars it needs to grow and thrive. This same chlorophyll reflects most of the sun’s energy that falls in the NIR spectrum. As such, a healthy plant has a high ratio between NIR and red reflectance that can be detected by satellites such as RapidEye. A Red Edge NDVI is calculated with RapidEye data like this:
Red Edge NDVI = (Band 4–Band 3) / (Band 4 + Band 3)
Once this value is calculated for every pixel, you can create a colorized image where healthy vegetation is red (typically a value of ~0.35 for Red Edge NDVI); less healthy vegetation is orange to yellow; and the rest of the colors represent human-made features, bare soil and water. The results of this calculation are in the animation below; and it clearly shows areas of less healthy vegetation in these pivot agriculture fields. With this spectral information, farmers can improve precision agricultural techniques. It is not uncommon to find 6 or more images collected over the growing season in key agricultural zones making RapidEye the ideal solution for precisions agriculture.
If you would like to find out more about using RapidEye for your academic, agricultural or any vegetation study, let us know at sales@apollomapping.com or (303) 993-3863.
Astrium Services is proud to announce that new SPOTMaps mosaics over the countries of India and Madagascar have been added to the database.
SPOTMaps products provide nationwide or regional coverage derived from orthorectified SPOT 5 color satellite images at a resolution of 2.5-meters.
Framed according to your area, SPOTMaps are the ideal geographic reference for your visualization, mapping and planning needs. SPOTMaps is today available over more than 100 countries, representing a total of 84 million km². This coverage is growing and updated every month.
offer all kinds of high quality christian dior shirts replications for sale which you need.who sells the best replica u boat watches chronograph 50mm mens u 42 quartz black dial in the assembly and combination process, every link is perfect.
The SPOTMap’s Advantages
- Seamless, uniform 2.5-meter coverage across whole national and regional territories
- Color basemaps offering high positional accuracy
- Suitable for working at scales up to 1:10,000
- Complements all types of georeferenced databases
- Colors faithfully reflect true landscape colors
- Value for your budget
- Recent and ready for rapid delivery
- Integrates directly with your GIS
- Multiuser licenses are available if required
For more information on SPOTMaps, including pricing and coverage details, please contact Apollo Mapping at sales@apollomapping.com or (303) 993-3863.
For our first Geospatial Frequently Asked Question (G-FAQ) of the New Year, I focus on a topic that is extremely relevant with the launch of our new Marcellus-Utica lease hold layer. Many times in the past few weeks, I have been asked to put together a map of our leasing layer but upon delving deeper into the client’s specific needs, it becomes apparent that what they are really asking for is a spatial analysis that is predicated upon the mapping data we can provide. It is my feeling that free mapping software such as Google Earth and Microsoft Virtual Earth has blurred the line between a map and spatial analysis by giving users tools to measure distances, zoom in and out, turn layers on and off and more.
So for this G-FAQ I explore the line between a map and a spatial analysis, specifically trying to address this set of core questions:
What is a map? What is spatial analysis? What purpose does each serve? How is a map (or perhaps we should call it mapping data as you will see below) used to complete spatial analysis? Is there a way for me to complete my own spatial analysis with free tools?
In order to answer this set of questions, we need to start off with a definition of a map. While many definitions I have seen tend to include a degree of social context or spatial interpretation, I whole heartedly disagree with this definition and believe these authors to be conflating a map with spatial analysis–a topic I address in more detail below. Instead, I tend to follow a much simpler interpretation of a map put forth by a leading cartographer at the University of California, Los Angeles, Dr. Norman Thrower:
A representation, usually on a plane surface, of all or part of the earth or some other body showing a group of features in terms of their relative size and position.
So then a map is simply a picture, a poster or even a trail map printed on the back of a microfiber cloth. A map is meant for human beings to extract important information about their surroundings and often to estimate the impact of these spatial patterns on their own existence. But this interpretation is not part of the map itself. A map is merely a means to an end; or a tool for use in spatial analysis.
The next set of questions we must address center on the definition of spatial analysis. In the academic world, and even on Wikipedia, there are many formal definitions of spatial analysis that conflate it with a set of statistical and other mathematical techniques such as spatial regression and interpolation. While I certainly recognize these studies as core components of spatial analysis, they are certainly not the only techniques we employ when we analyze data. I chose to define a spatial analysis as:
Any interpretation of geographic information to answer a set of questions we might have about our surroundings.
With an all encompassing definition such as I have put forth, we capture all forms of geographic questions one might have and can answer with map data. For example, what if you wanted to know all of the schools in a county that are within 1,500 feet of a police station-fire department and a hospital. While this ‘spatial analysis’ is not the complex sort of analysis many geographers and users of ArcGIS (which is the most widely used software package to analyze spatial data) would pride themselves on, it is most definitely a question that can only be answered by:
- Gathering and preparing a set of mapping layers that shows the locations of the county limits, schools, police stations and fire departments.
- Combining them together in a geospatial software application that lets you view and analyze the layers all at once.
- And then finally running the required set of spatial filters and queries to reach the answers you seek.
From the explanation above, it should be apparent that a map or mapping layers alone do not complete a spatial analysis, rather they are the inputs required to get the answers you seek. As a quick side note, I introduced the term ‘mapping layers’ above and now define this to be any dataset with an associated coordinate (e.g. latitude and longitude), such as the locations of the police departments, fire stations and schools in a county. ‘Mapping layers’ are the raw data used to create a finished ‘pretty’ map and/or are used in conjunction to complete a spatial analysis.
Now let’s turn our attention to a visual representation of spatial analysis. In the screen captures below are the major steps involved with the spatial analysis outlined above–along with a map showing the results of this analysis. While tools like Google Earth are effective for answering many geospatial questions, most lack crucial features with which users can sort, filter and build upon spatial data to answer more complex queries. For the spatial analysis below, I utilized Esri’s ArcMap 10.0 along with free Geographic Information Systems (GIS) mapping layers that accompany ArcMap.
In the screen capture for Step 1 of this analysis, I brought mapping layers for the County of Boulder, Colorado (including the locations of schools, police departments, fire stations and hospitals) into ArcMap and then displayed them in a fashion that made visual and spatial queries possible. For this article, I will focus on a small subset of these mapping layers centered in North Boulder within our city limits.



- For many people, a spatial analysis is what they seek when they might be requesting a map. In that, they have a question they want answered where mapping data will help to answer it but is not sufficient without subsequent analysis.
- Any good spatial analysis should have an accompanying map that can help to illustrate some/all of the answers to your questions.
- A spatial analysis can be much less complex than the name may lead you to believe!
While there are many tools you can use for spatial analysis and making maps, many of them are quite costly. One very powerful free option is Quantum GIS–you can find out more about this freeware GIS option here. In the next edition of G-FAQ, I will pick up on this conversation by examining the components and features of an effective map.
Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.
Find Out More About This Topic Here:
Brock Adam McCarty
Map Wizard
(720) 470-7988