Continuing our series on the use of RapidEye data in geospatial projects, for this edition of The Geospatial Times we demonstrate the value of RapidEye satellite imagery for automated extraction of rivers and streams across large areas. These features can be particularly challenging to extract manually given the complexity of riparian zones, so finding a reliable technique to do this in an automated fashion can be a huge time (and cost!) saver.

The RapidEye Constellation

RapidEye is a constellation of five 5-meter medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers a daily revisit time to every location on the planet with a huge footprint that is 77-km wide. The data is priced extremely competitively with a base price of $1.28 per square kilometer for all five spectral bands–academics receive a discount on this price. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data available in the red edge band allows users to extract more useful land ‘information’ than can be extracted from traditional 4-band imagery sources.

River Channel Extraction

While RapidEye has lower resolution than data offered by high-res satellites, its wide area coverage and five spectral bands make it an ideal solution for automated extraction of stream and rivers over a large area. To complete this analysis, we used ENVI 4.8 and extracted rivers from a scene of RapidEye data collected over the San Luis Valley, Colorado on June 19, 2011 utilizing the built-in Supervised Classification algorithms.

In the first step of this automated extraction, we built a training set of river channels utilizing the Region of Interest (ROI) tool in ENVI 4.8. This training set contained seven polygons (or 318 pixels) over the center waterways of large to medium sized rivers evenly dispersed throughout the RapidEye scene. Next, we ran a Parallelepiped Supervised Classification filter set to identify pixels in the imagery that were within three standard deviations of the mean spectral values of the ROI.

An inspection of the results revealed that we had a lot of room for improvement as large stretches of smaller rivers were missed. As such, we added in two more polygons to the ROI over smaller streams for a total of 9 areas and 345 pixels. The same Parallelepiped filter was run again on the entire RapidEye scene yielding the results you see below labeled, ‘Iteration 2’.

An inspection of the results from Iteration 2 showed that we could still do a better job finding the smaller streams; so we added in 2 more polygons (for 394 total pixels) over streams that were missed in the supervised classification. The same Parallelepiped filter was run using the third version of the ROI–and again the results were disappointing. This time we had many false identifications of healthy vegetation and bare soil which suggests that the polygons we added to the ROI contained these surface features.

For the fourth and final iteration, we removed the two polygons added to the ROI in Iteration 3 and replaced them with smaller areas. The two new polygons we added were over small streams, but this time we focused on pixels that appeared very dark suggesting they were ‘pure’ water–our new ROI contained 11 polygons covering 353 pixels. The results of Iteration 4 were the best we achieved but there were still issues to be found. In the animation below, we circled one area of concern with an orange ellipse. You can see that this field was ID-ed as a river in all four iterations suggesting that: (1) it was watered right before this imagery was collected; and that (2) the dominant spectra detected by RapidEye was that of water rather than the healthy vegetation it saturated.


Click on the image above to see an animation of our river extraction. This five slide animation shows the four iterations of automated river extraction that we have described above as well as the source RapidEye imagery. (Image Courtesy: RapidEye)

 

The results of this analysis suggest that medium resolution RapidEye imagery is a useful tool for the automated extraction of river channels. In our analysis, we identified 191,794 pixels of water or freshly watered areas which cover more than 1,180 acres! While there is certainly room for improvement with the analysis put forth here, the technique is obviously sensitive as it detected freshly watered agricultural fields. Taking this logic farther, one can also theorize that the streams missed in this analysis had little to no water flowing through them or were dominated by emergent vegetation; and that utilizing imagery collected during the spring with higher flow rates should help to maximize detection rates. Another idea would be tweaking the standard deviation threshold so that identified ‘river’ pixels would have to match the mean spectral values of the ROI more closely. As a final note, it is much easier to manually delete misidentified pixels than it is to hand-digitize a complex river channel.

If you would like to find out more about using RapidEye for your academic, engineering or any landscape study, let us know at sales@apollomapping.com or (303) 993-3863.

For projects requiring a more detailed look than can be offered by the common free sources of elevation data and for those in cloudy or hard-to-reach regions where this data is of poor quality, Astrium GEO’s Elevation10 product suite is the ideal solution. Elevation10 is a 10-meter digital elevation model (DEM) derived from stereo pairs collected by the radar satellite, TerraSAR-X. These DEMs are often delivered within a month from order placement utilizing data obtained in the past two years.

TerraSAR-X is a synthetic aperture radar (SAR) satellite, meaning it is an active sensor unlike the optical satellites most of us are familiar with such as QuickBird, Pleiades 1 and WorldView-2. An active sensor is one that (1) creates an energy pulse, in this case radar waves; (2) aims them at a surface, in this case our planet; and then (3) very accurately measures the amount of time it takes for this pulse to return to the sensor. Radar waves can pass right through clouds which are an optical satellite’s worst nightmare.

As TerraSAR-X is measuring the time it takes energy pulses to return to its sensors as well as its position in space in the XYZ directions, radar stereo pairs have higher accuracy than do traditional pairs collected by optical satellites. This means that elevation data extracted from TerraSAR-X stereo pairs is accurate even without the use of ground control points. Ground control points can be expensive to collect–particularly in remote and unsafe areas–so this can be a significant cost savings vis-à-vis other elevation products.

Elevation10 is created from TerraSAR-X radar stereo pairs collected in StripMap mode. StripMap data has resolution up to 3-meters with a footprint that is 30 kilometers (km) wide by 50 km long. By employing TerraSAR-X stereo pairs collected in both ascending and descending directions, Astrium GEO is able to remove many of the anomalies that are common in SAR elevation data.

Elevation10 is offered as both a digital surface model (DSM) which includes vegetation, buildings and other human-made structures; and as a digital terrain model (DTM) where these have been removed. DTMs are hydrographically enforced to make sure that features which impact water flow, such as dams and embankments, are represented. Hydrographic enforcement is also offered with DSMs. Here is a summary of the accuracy specifications for Elevation10:

  • Absolute Horizontal Accuracy–5 to 10 meters (Circular Error 90%, CE90)
  • Absolute Vertical Accuracy–5 to 10 meters (Linear Error 90%, LE90)


Click on the image above to see an animated comparison of 10-meter Elevation10 (both a DSM and DTM), 30-meter ASTER GDEM and 90-meter USGS SRTM data obtained over Barcelona, Spain. (Image Sources: USGS, JPL and Astrium GEO)

 

For regions of the world with limited access, such as the Himalayas and the Andes, or in regions with persistent cloud cover and/or haze, such as Malaysia and Beijing, Elevation10 is the ideal solution. Elevation10 data is priced by the square kilometer according to area and product type with academic discounts available. For more information about Elevation10, contact your Apollo Mapping sales representative at (303) 993-3863 or sales@apollomapping.com.

At our most recent reseller conference in late April, DigitalGlobe unveiled plans about their next revolutionary high resolution satellite, WorldView-3. Expected to launch in 2014, WorldView-3 will feature 8 multispectral bands matching those already offered on WorldView-2 as well as 8 additional short-wave infrared (SWIR) bands. The 17 spectral bands offered by WorldView-3 will make it the most technologically advanced commercial satellite without question.

With the launch of WV3, DigitalGlobe’s constellation of satellites will grow to four, each with resolution at or exceeding 60 centimeters (cm). The four constellation satellite will be able to collect more than 3 million square kilometers (sq km) of high resolution imagery per day. The commercial success of both WV1 and WV2 as well as this recent announcement suggests that DigitalGlobe is poised to continue its dominance in the high resolution imagery industry.

Below are highlights of the pending WV3 system that will interest our readers the most. There is discussion that WV3 will obtain imagery in afternoon in order to have complimentary 8-band multispectral data available for up to twice a day over each location–WV2 currently collects 8-band imagery in the morning hours.

  • 8-band multispectral (RGB+NIR adding in a coastal, yellow, red edge and extra NIR band) with 1.24-meter resolution
  • 8-band SWIR with 3.7-meter resolution
  • Co-registered panchromatic band with 31-cm resolution
  • An average revisit time of less than 1 day by maximizing high-off nadir collections
  • 617 km orbital height
  • Can collect up to 676,000 sq km per day
  • A swath width of 13.2-km at nadir
  • An expected horizontal accuracy of less than 3 meters Circular Error 90% (CE90)
  • Assuming a 30 degree off-nadir, single pass maximum area collections
    • ~7,700 sq km in mono mode
    • ~3,100 sq km in stereo mode

Simulated maximum collection geometries for WorldView-3 assuming a maximum off-nadir of 30 degrees.

 

For more information on the pending launch of WorldView-3, you can reach an Apollo Mapping representative at (303) 993-3863 or sales@apollomapping.com.

Many say there are two things you’re not supposed to talk about in the world of business a–politics and religion. But whatever your faith (or lack thereof) or your political leaning, these two topics affect everyone in the world. In a country like the United States, we find people that follow all of the major religions and many of the lesser known ones as well. The four biggest religions in the world are: Christianity (2 billion followers), Islam (1.5 billion), Hinduism (1 billion) and Buddhism (500 million). These religions have their main regions of impact (i.e. Hinduism in South Asia, Christianity in the Western world), but adherents to all of these faiths (and others) can be found on all the continents–well, maybe not Antarctica.

And while some religions have fallen by the wayside and cease to be practiced, there are still monuments and artifacts to remind us of their former prominence. Consider the Pantheon which was built to serve as a temple to all the gods and goddesses worshipped in ancient Rome; or the Temple of the Jaguar in present-day Guatemala which was built by the Mayans to serve as host for their spiritual rituals. The Karnak Temple Complex in Egypt is the largest known religious site in the world. Comprised of temples, chapels, pylons and more, Karnak was built for the Earth goddess Mut and her son Mondu.

The four major world religions all have their own prominent landmarks as well. The Hindus have the Karni Mata temple in Deshnoke, Rajasthan, India. A visit to the temple will find 20,000 rats living there. According to local legend, Karni Mata, the 14th Century incarnation of Hindu goddess Durga incarnated her dead son and the region’s storytellers as rats. The Hindus and the Buddhists share the history of Angkor Wat, a temple in Cambodia. Built by King Suryavarman II in the early 12th Century, it was dedicated to the Hindu god Vishnu. In the 13th Century however, Angkor Wat gradually migrated from a Hindu landmark to one for Theravada Buddhist, which continues to this present day.
The Vatican City is a landlocked sovereign city-state inside of Rome. It is relatively small in size, roughly 100 acres, and its permanent population is just over 800 people. Established in 1929, it is ruled by the Bishop of Rome (the Pope). There have been 266 Popes since the first in 32 A.D. (i.e. St. Peter), but they haven’t always resided in Rome. There have been many other regions that have hosted the Papacy, such as Avignon, France from 1309 to 1376 to name but just one location. After returning to Rome from Avignon, the Papacy has resided there since the late 1300s.

It may be the smallest State in the world at just over 110 acres, but it commands a powerful allegiance of over a billion followers through the Catholic Church. Image Photo Enhanced by Apollo Mapping and captured by WorldView-2 on December 28, 2011. (Image Courtesy: DigitalGlobe).

 

One of the most reverent religious landmarks in the world that embraces multiple histories is the Temple Mount in the Old City of Jerusalem. Judaism, Islam, Christianity and Roman paganism have all been known to use the Temple Mount for religious purposes. Judaism regards the Temple Mount as the place where God chose the Divine Presence, from here is where the world expanded into its present form and God used dust to create the first man. Sunni Muslims consider the Mount the Noble Sanctuary, the location of Muhammad’s journey to Jerusalem and ascent to Heaven. However, the Mount is not the holiest place to Muslims; that would be Mecca (located in Saudi Arabia) which is the birthplace of Muhammad and the site of the composition of the Quran. Thirteen million Muslims visit Mecca every year.

This is just a sprinkling of the foundations of some of our world’s great religions. The history of mankind is amazing, and alongside it for much of the way has been religion. We could delve much further into specific aspects and intricacies of religion and geography, but for now, we’ll stay with this very brief introduction to a few items of history. Religious travel can be enlightening and rewarding, not to mention educational. Religion has such great and vast meanings to so many people, to better understand the timeline is to better understand others. And a good way to do that is to look at the geography, dispersion and landmarks that are integral to religion.

Justin Harmon

Staff Writer

It’s a long way from Coventry, England (our stop in the last edition of Small World) to Kingston, Jamaica, and there are marked differences between the two cities. However, they do share some commonalities, one of them being a unique music culture that grew out of 1960s reggae. The genre is called dub, a stripped-down form of reggae where the vocals are removed and the drums and bass are amplified. Often there are elements of echo and reverb added to give greater effect. Coming of age in the 1970s in London underground clubs, the dub sound frequently mixed with the punk scene to grow a new sound known as post-punk in other parts of England. This genre was best known by artists such as The Police, The Clash and UB40.

Music is central to Jamaica, and most people associate reggae with the country. While there are many forms and many artists associated with the island nation, perhaps the most famous is Robert Nesta Marley (aka Bob Marley). In Bob’s short life, he brought reggae to the world. He mostly wrote about issues related to his homeland, giving voice to political and cultural concerns. Marley was also a devote member of the Rastafari movement, a new religious movement that came of age in the 1930s in Jamaica. While today Rastafarians make-up less than 5% of Jamaicans, the faith is still commonly associated with the island.

Kingston is the capital of Jamaica, and it resides on the southeastern coast of the island nation. Just fewer than 1 million people live in the city at the foot of the Blue Mountains, the largest mountain range in Jamaica. Its highest point is Blue Mountain Peak at ~7,400 feet. Kingston has a tropical climate with wets season during the summer and fall; and a dry season during the winter and early-spring.

Kingston was founded in July of 1692 as a place for survivors of the earthquake that crippled Port Royal. Port Royal was a commerce shipping center before hurricanes and other natural disasters struck it in the late 1600s. It was completely destroyed by a fire set by pirates in 1703. Kingston slowly grew in population during the next two centuries; and then became Jamaica’s capital in 1872, taking the title from Spanish Town.

Christopher Columbus claimed Jamaica for Spain in 1494. In 1655, the English captured the island after the Spanish fled and freed their slaves. The slaves escaped to the mountains to live with the indigenous descendants of the South American Arawak and Taino people where they fought the British. These Jamaicans were known as Jamaican Maroons, and fought valiantly for 52 years until the 1737 peace treaty with the British rulers of the island. Slave trade was eventually abolished in 1807, leading to the import of Indian and Chinese workers as indentured servants. Descendants of these workers now make up approximately 2% of the island’s population.

The oldest school in the Caribbean is the Wolmer’s School founded in 1729 and located in Kingston, Jamaica. It consists of four schools from primary to secondary education and has produced 21 Rhodes Scholars. A theater still stands today that was first opened in 1774; but the first theater was actually built in 1682 and it helped to foster the city’s artistic community. Kingston is a vibrant city that has a lot to offer its residents and its visitors. While the city is not best known for its beaches, it is only a short drive to one of the most famous beaches on the island, Negril. Consistently rated one of the top ten in the world, Negril, affectionately known as “Seven Mile Beach,” has been written about in novels and travel logs for decades. So come experience what Kingston and the surrounding areas have to offer–you’ll fall in love with the beauty and pace of life on this Caribbean island.

Justin Harmon

Staff Writer

This month’s Outside the Box takes a look at seaweed. “What’s too look at?” you might ask, some people see food, others see something kind of slimy and a few see a new source of biofuel.  To read more about this interesting application of seaweed click –Seaweed ” href=”https://apollomapping.com/2012/April/article13.html” target=”_blank” rel=”noopener noreferrer”>here.Seaweed has been used as a staple in human diets in Japan, Korea and China since prehistoric times. There are some 21 species used daily in Japan, and seaweed accounts for close to 10% of Japanese diets. Sometimes called Kelp, seaweed grows rapidly in underwater forests on shallow ocean bottoms. Kelp has high levels of iron, calcium, magnesium, potassium and several trace minerals, and is therefore considered a multi-vitamin. Alongside its nutritional value, what else could seaweeds be useful for? Some think that it could be a viable source of renewable energy.

One of the biggest criticisms aimed at biofuels is that are derived from crops and thus take valuable land away from food production. Bio Architecture Lab (BAL) claims to have developed a technology that makes seaweed a cost-effective source of energy. The process would extract all the major sugars in seaweed and then convert them into renewable fuels and chemicals. BAL says that it will take less than 3% of the global coastal waters to produce enough seaweed to replace 60 billion gallons of fossil fuels annually–to put this in perspective, the United States used 171 billion gallons of fossil fuels in 2005 just for our transportation needs.

Researchers from Israel believe that producing biofuel from seaweed-based sources could solve already existing problems in the marine environment. Many coastal regions suffer from eutrophication due to pollution caused by human waste, agriculture and fish farming. Eutrophication leads to elevated levels of nutrients and harmful algae which can be very damaging to coral reefs. By employing multiple varieties of seaweeds which capture and bio-accumulate pollutants, eutrophication could be reduced in shallow water ecosystems.
One of seaweed’s most abundant sugars is alginate–a polymer that can’t be converted to ethanol. However, scientists at BAL believe that when combined with diced fresh seaweed, a fermentation process would take place that allows for the necessary transformation to take place. Thierry Chopin, at the University of New Brunswick, thinks that this process may not be as cost-efficient as others believe. He is also concerned that you would not be able to harvest year-round.

BAL is quick to respond, saying that they don’t expect it to solve the world’s oil problems, only to make a considerable contribution. Their purpose is to reduce our carbon footprint and for the technology to work in tandem with other alternative energy solutions such as wind and solar. Dutch company Ecofys is currently engaged in a project to extract seaweed biofuels from their coastline by late June 2012. They believe that seaweed and wind turbines are a good combination. When the wind farms are closed for shipping and commercial fishing operations, the seaweed farms can provide proteins for fish and livestock feed and can be used for the creation of energy.

While this is an energy source in the making, it is a promising sign for the future of renewable energy sources. As traditional and alternative energy firms continue to establish new avenues of power generation, it will allow us to reduce our dependence on oil and gas as well as to learn how to use these resources more efficiently. There is more than 200,000 miles of coastline in the world, a distance roughly equal to that from the Earth to the Moon. With the potential area for aquatic agriculture fields throughout the world, we can have high hopes that this technology will be mastered and provide for a great deal of our future energy needs.


The beautiful blue waters off of New Zealand’s coast are home to many varieties of seaweed that could be the future of energy production. Image captured by WorldView-2 on October 15, 2011. Image Photo Enhanced by Apollo Mapping and courtesy of DigitalGlobe.

 

Justin Harmon

Staff Writer

For this month’s Geospatial Frequently Asked Question (G-FAQ), I turn my attention away from map making and toward a topic that few us of likely consider but perhaps more should, that being naming conventions. When I first started using computers, I remember the black DOS screen with a few white characters, one of them flashing, that you starred at when your PC started up (after waiting about 5 minutes that is!). In those days of bright fluorescent colors, hair bands and Joe Montana’s 49ers, people were forced to think about naming conventions as spaces were not recognized when you named your files in DOS. Further, navigating between multiple folders with long names and complex structure was a nightmare, as everything was a typed command rather than the point-and-click ease we have all grown used to using Windows.

The relative ease of current Windows operating environments versus DOS has also caused most of us to forget that naming rules still do exist even within Windows Seven. But what exactly are these rules and what if any specific rules apply to naming geospatial data? In this GFAQ, I explore this topic and offer my recommendations as related to this set of core questions:

What naming rules apply to Microsoft Windows? What rules are there to follow in ArcGIS? What happens if I break these rules? What are the best practices I can use to name my files and folders so that everyone in the organization can use them more effectively?

Naming Rules in Windows

To delve into this G-FAQ, let’s start with the over-arching naming rules that Windows enforces:

  1. A file’s path name is limited to 260 characters. A path name contains the following elements in this stated order: drive letter, colon, backslash, folder name(s), file name and a terminating null character. The bolded elements are added by default meaning that users have 256 characters to use between the folder(s) and file names. As an example, a file named test.shp on my desktop has a path name of: C:\Users\Brock\Desktop\test.shp; so while the file name is 8 characters long, the path name is actually 31 characters long.
  2. No special characters can appear in a folder or file name, these are characters are: / \ : * ? “ < > |

Naming Rules in ArcGIS

When it comes to specific Windows geospatial applications, all of them must adhere to the rules put forth above; and many of them will have their own naming intricacies that users should familiarize themselves with. As there are far too many applications to cover in this short piece, my focus will be on the most widely used geospatial application today, ArcGIS. Arc uses a wide variety of file formats and by far the most restrictive formats with regards to naming are coverage and grid files, as these files must have names that are: (1) 13 or fewer characters; and (2) all lowercase.

When it comes to naming Esri shapefiles and GeoTIFF files (the most common formats we use here at Apollo Mapping), there are no specific ArcGIS rules to follow but there are definitely best practices that should be observed. When they are not observed, issues can abound; I will discuss a few of these issues in the next section. Here is a list of best practices we recommend you follow:

  1. Do not use spaces in names. If you want to indicate a space, use an underscore (i.e. _).
  2. Do not use characters other than letters, numbers and underscores in names.
  3. Do not start file names with a number.
  4. Do not put periods in a file name as they typically indicate a file extension follows.
  5. Find a balance between descriptive and over simplified names. I will discuss this topic in more depth below but I tend to use file names that are 15 characters or less.

I should mention a quick side note on naming shapefiles, or rather changing the name of shapefiles. A shapefile is actually a group of individual files including a .SHP, .DBF, .SHX and .PRJ at minimum. If you want to change the name of a shapefile in Windows Explorer, then you need to change the file name of all the individual components of the shapefile–not just the .SHP file.

What Can Happen in ArcGIS With ‘Bad’ Names

ArcGIS does little to restrict users when it comes to the two naming rules for Windows put forth above. For example, you are able to use special characters in the name of a shapefile you create from a toolbox function; but when you try to actually run the function, ArcGIS fails giving you an Error 999999 with no explanation on how to solve the problem.

And if you try to create a shapefile with a path name that exceeds the 260 character limit put forth above, ArcGIS will fail with an Error 000210. Again, the help menu for this error offers little to no assistance in solving the issue. So in both cases, it is up to the user to understand the limitations of Windows to solve these issues.
ArcGIS will also allow you to violate all five of the best practices for naming put forth above. In each case, you can create shapefiles, TIFFs, etc. that will open and function properly but issues can still occur–and as Murphy’s Law states, these issues will always happen right before a major deadline. In the years of working with ArcGIS, here are the ‘oddities’ I have encountered and narrowed down to naming conventions:

  1. Lost data–this seems to happen most often when numbers are used to start file names and/or periods are used in a file name.
  2. Corrupt files–this seems to happen most when names get very long after running multiple toolbox functions on a set of files.
  3. Unstable files–by this I mean files that seem to open but might not work in toolbox functions, take for example this technical note written by Esri. I have seen periods used improperly in file names cause this as well.
  4. Incomplete production–by this I mean running toolbox functions but receiving no output. I have often solved this problem by choosing a simpler output name and moving all the source and output destinations to a folder in the root C:\ directory.

File and Folder Naming Best Practices

For the remainder of this G-FAQ, I put forth several recommendations that will help GIS professionals at large firms as well as GIS tinkers keep their geospatial data organized. In large organizations, establishing file and folder naming conventions is an absolutely must for improved efficiency as you might have tens or even hundreds of people accessing the same set of data files.

  1. It is crucial to find a balance between identifying the information contained in a file and/or folder and creating obscenely long names. We suggest 15 characters or less for both file and folder names. Here are some ways to keep file and folder names short:
    • Use industry standard abbreviations to convey additional information.

 

  • Some companies chose a combination of letters and numbers in a particular order to organize data. If that is what you chose, be sure to store a master look up table in a central location to un-code the cryptic titles.
  • If you are creating files as part of an analysis, develop a naming schema ahead of time, for instance adding a version number to the end of all file and folder names.
  • When you pick a name, you should try to include details on the elements in the file/folder; the scale it was created; the agency creating it; and the date. This will help future users surf through your geospatial datasets more efficiently.
  • Establish a set folder structure that is flexible enough to account for multiple project types but is also consistent enough to assure a common thread between all the folders and subfolders for a project. For instance, a folder with the project name or number is an obvious top-level choice; with subfolders below for project scope, background files, working files, etc.

 

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here:

Brock Adam McCarty

Map Wizard

(720) 470-7988

brock@apollomapping.com