In last month’s small world we visited Bogota, Colombia, and from there we go to one of her sister cities, Dubai, United Arab Emirates (UAE). While they may be sister cities, it many ways they could not be more different than each other. The oldest architecture in Bogota is from the colonial period in the early 1800s after the independence of Colombia. And while human civilization in the area now known as Dubai can be dated back to the 3rd millennium B.C., Dubai is now more commonly recognized for its modern architecture, including the tallest building in the world, the Burj Khalifa (towering over 2,700 feet).
Dubai is the largest city in the United Arab Emirates with just under 2.3 million inhabitants. In 2010, Mercer’s Cost of Living index said that Dubai was one of the 50 most expensive cities to live in, though they have fallen on that list several spots to around 80th, putting them on par with Los Angeles. In years past, it was considered the richest city in the world; and while Dubai no longer holds that title, its Gross Domestic Product (GDP) growth rate for 2012 is expected to be in the 4-5% range, far exceeding the 1.9% expected for the United States. The city generates nearly 33% of the GDP for the country on its own, due in large part to its base for many international oil and gas companies, but also because of its booming tourism industry.
Nestled along the Persian Gulf, the city made its name in the pearl trade in the early part of the 20th Century. As the pearl trade started to decline, Dubai and the rest of the region increased their exploitation of the rich oil resources in the area. Finding the inland desert region of the UAE too difficult to conquer, in partnership with British Petroleum, the nation set its sights on offshore exploration. Oil was first struck in the UAE in 1958, and it continues to be one of the most productive areas of the world. The UAE is seventh on the list of proven oil reserves, with Dubai holding 4% of the oil, and approximately 2% of the natural gas in the country.
The population of Dubai has grown drastically since the discovery of oil in the late ‘50s, growing by 300% in the 1970s alone! Today, less than a quarter of the city’s inhabitants are national citizens, with the other 80% coming from all over the world–but mostly from the Middle East, Southeast Asia and North Africa. The majority of these expatriates are there to work in the oil and gas industry.
With people from every corner of the world, the culture of Dubai is very diverse. The UAE is one of the most religiously tolerant Arab countries in the region, and Christian churches, Hindu temples and Sikh gurdwaras all accompany the numerous mosques on Dubai’s streets. The city also plays host to numerous conventions and conferences which welcome nearly 2 million people a year. This continuous influx of people from all over the world adds to the vibrant culture of the city.
Regional economic growth fueled by oil and gas revenues ($305 billion in 2006) and tourism is expected to continue long into the 21st Century, as such city planners are continuously working to prepare for the Dubai of tomorrow. The tourism industry is estimated to grow from 5 million in 2007 to nearly 15 million guests in 2020, with the arc continuing to grow steadily from there. In their Dubai Strategic Plan, it is clear that planners have high hopes for the years to come. Between 2000 and 2005, Dubai recorded an annual GDP growth rate of 13%, putting it six percentage points ahead of the Qatar’s growth, a rapidly growing country in the region. Dubai city planners adhere to a guiding principle made up of five components: economy, which promotes adoption of free market principles; social development, which aims to protect the national identity, culture and way of life; security, justice and safety, which ensures the protection of human rights; infrastructure, land and environment, which seeks to protect the environment at or above international standards and to provide world-class infrastructure; and public sector excellence, which includes a transparent government.
And Dubai continues to invent wonders of architecture. In cooperation with Deep Ocean Technology, there have been plans approved for a hotel that will sit 21 stories under the water! Dubbed the Water Discus Hotel, it will be able to change locations and rise to the surface, taking between 15 minutes and 12 hours due to its variable speed controls. It is expected to cost up to $120 million dollars, and there hasn’t been a completion date announced. But when it’s ready, you will be able to go to the highest and lowest man-made structures in the world in one day–pretty cool.
Justin Harmon
Staff Writer
Aquaponics is a sustainable food harvesting system that combines aquaculture (the farming of aquatic organisms) with hydroponics (a method of growing plants using mineral nutrient solutions in water, without soil). In this aquaponics, the water from the aquaculture system is recycled to hydroponic plant-life whereby they take advantage of the vital nutrients added in the first step.
One of the most important aspects of an aquaponics system is the bacteria and its function in the nitrogen cycle. Fish excrete ammonia, which in a more natural setting would be absorbed, but in a home fish tank system, the ammonia needs to be extracted because it is harmful to them. Two types of bacteria aid in the conversion of ammonia into nitrites and nitrates (Nitrosomonas sp. and Nitrobacter sp. respectively). These nitrates are then cycled to the hydroponic plants where they use the nitrates to increase metabolic growth. Also important to both fish and plant-life is a stable pH which can be achieved by adding egg shells or calcium carbonate tablets to the systems.
Some may wonder about the efficiency of aquaponics versus a traditional hydroponic system. Researchers in Canada found that in the first 6-months of testing, the hydroponics system produced better results, but this is likely due to the lag time it takes aquaponic systems to build up the required levels of bacteria. By the 12-month mark, the aquaponic system out-performed hydro, and in some cases production levels had doubled that of hydro levels. Optimum production level was seen at the 2-year mark for aquaponic systems.
While aquaponics sounds like an “outside-the-box” idea, many believe it has its roots in ancient times. Mesoamerican agriculturists used a procedure called chinampa where small areas of arable land for the growth of crops were located in shallow lake beds in the Valley of Mexico. Commonly referred to as floating gardens, chinampas were found in the shallowest areas of lakes. Beds were constructed in these areas with mud, lake sediment and decaying vegetation to allow the plants to sit above the water, while their roots grew down through the nutrient rich emollient into the life-giving lake. Maize, beans, chili peppers and flowers were just some of the crops grown in the chinampas.
Today the system is more refined, and is typically comprised of: a rearing tank (for the fish); solids removal (catches uneaten food); a biofilter (where ammonia is converted into nitrates); the hydro subsystem (where plants are grown by absorbing nutrients); and the sump which recycles the water in the system from the lowest point.
Aquaponic systems have many advantages to consider: water conservation through recycling; organic fertilization of plants with fish emulsion; reduction in needed cropland; and efficient commercial installations that reduce food miles. And you might ask, “What are food miles?” This is a term that describes the distance it takes to get food from production to consumer; and it can be understood in tandem with a carbon footprint. So if you’re looking for an exciting hobby or you want to start growing your food to save money and eat healthier, perhaps you should give aquaponics a try. It is sure to give you a healthy new look at how we feed ourselves outside the box!
Justin Harmon
Staff Writer
For this month’s Geospatial Frequently Asked Question (G-FAQ), I explore the topic of spatial resolution as it relates to satellite and aerial imagery; and its impact on the objects that you can and cannot see in this data. Have you ever purchased or downloaded imagery with 1-foot pixels expecting to see a feature that was approximately two feet in diameter, for instance a small bush, only to be disappointed when you could not find the feature when you inspected the full resolution data? If you answered yes in your head just now, then this GFAQ is the article for you as I explore these topics:
What is meant by spatial resolution and pixel size? How is the color of a pixel determined? Why can I see some small objects in my imagery and others not? What is the general rule of thumb to determine what can and cannot be seen in imagery?
To start off this discussion, let’s explore resolution as it relates to satellite and aerial imagery. There are four types of resolution: spectral, temporal, radiometric and spatial. Spectral resolution is defined by the range of the electrum magnetic spectrum a sensor measures–or a band–as well as by the number of bands it can measure. Temporal resolution can be defined as either the fixed repeat time a sensor makes to each location on the planet–for instance every 16 days for Landsat 7–or the regularity of archive coverage for companies such as DigitalGlobe, Astrium and RapidEye. Radiometric resolution refers to the bit depth of a sensor (typically 11-bit or 12-bit); and the higher the bit depth, the more sensitive the sensor is to detecting photons reflected from a surface.
Spatial resolution is commonly thought to define the amount of ‘ground’ each satellite/aerial imagery pixel covers. For example, WorldView-2 features 50-centimeter (cm) spatial resolution in its panchromatic band so that each pixel covers 50-cm by 50-cm in the real world, or 0.25 square meters (sq m). The reason I use the expression above, ‘commonly thought,’ is that IKONOS can be delivered with 80-cm pixels, for example, but this does not necessarily equate to the actual length of each side of the square that was imaged on the ground. This is actually the ground sampling distance (GSD), and GSD rarely, if ever, matches the pixel size. The GSD of IKONOS is 82-cm at nadir (i.e. when the satellite is pointing directly down when it images the ground); it increases as the satellite tilts to collect data so that at 30 degrees off-nadir, the GSD is actually 1-m. While imaging companies can use resampling techniques to convert a 1-m GSD to a pixel size of 80-cm, they cannot create data that is not there; hence 80-cm IKONOS imagery collected at 30 degrees off-nadir will be ‘fuzzier’ than data collected at 10 degrees. This resampling of data from the actual GSD to a set pixel size has serious implications on the use of the Nearest Neighbor kernel which many academics prefer–if you would like more info on this topic, drop me a line at brock@apollomapping.com as this discussion is outside the scope of this GFAQ.
In order to understand how the color of an individual pixel is determined, we first need to understand the basic principles behind optical imaging. An optical satellite and/or aerial sensor is really just an extremely advanced camera that is suspended in space; and similar to a camera, these passive sensors require a light source (i.e. the Sun) to take an image of the ground. The Sun radiates our planet with photons–which are packets of energy–covering a large range of the electromagnetic spectrum; and from this, the human eye can detect only a small portion, or the visible spectrum. When a photon strikes the surface of plant, road or any other object, it undergoes molecular reactions which change its energy state (or alter its wavelength) and then it is reflected back out.
A satellite and/or aerial sensor detects the intensity of photons reflected from the surface, measuring them across a range of wavelengths or a spectral band. If a surface is painted blue, many more ‘blue’ photons (or those with a wavelength of ~450 to 475 nanometers) are reflected to the sensor than are photons in any other energy state. As such, the sensor records a higher intensity value (called a digital number) in its blue band; and then, when you display the imagery in natural color, the pixel appears blue. Most sensors have 4 spectral bands with three in the visible spectrum, i.e. blue, green and red; and then one band in the near infrared spectrum as this data is important for assessing plant health.
There is one key consideration to layer on top of this discussion of pixel color and that is the amount of ground covered by each pixel. As pixel size grows, so too does the amount of land it covers and then so too does the chance that each single pixel covers multiple surface types. So if a 50-cm WorldView-2 pixel covers both part white sidewalk and part green grass, then its ‘color’ will be a combination of these two surfaces (i.e. greenish-white) when displayed in natural color. The animation below will help to describe this phenomenon better than words possibly can.
This animation helps to explain why features that are smaller than pixel size can be visible in satellite and/or aerial imagery. Take for example the white parking lines painting on black asphalt in the animation above. If a satellite were to image this small area, it would average the pixel to a light grey color. Now imagine you are looking at this imagery and specifically at the parking lot, you would see that the majority of the pixels covering the parking lot are deep black; and while the parking lines might be grayish-white, they would appear to be simply white on such a dark, black background. And it is this combination of a brightly colored surface surrounded by a dark background (or vice versa) that is typically responsible for objects appearing in satellite and/or aerial imagery that are smaller than the pixel size.
In order to develop general rules that describe this phenomenon, we need to understand the difference between detecting a feature on the ground and truly resolving it. In the case of a parking line, this is a simple linear object that needs little more than a row of pixels for us to identify it on the ground. Parking lines also have strong visual clues associated with them in that they are positioned in a particular way (i.e. in rows) on a black surface (i.e. a parking lot) with cars clustered between them. Now consider a dark manhole surrounded by black asphalt in imagery with 50-cm resolution. While this manhole may appear as a slight discoloration from the surrounding black asphalt, it would not be distinct enough for you to tell if it was indeed a manhole or simply a dark canvas bag left in the parking lot. What I have explained here is the ability to detect a manhole versus resolving a parking line–these are different terms with important implications I discuss below.
Here then are some general rules of thumb to determine the objects you can detect and/or resolve in satellite/aerial imagery:
- An object that is brightly colored on a dark surface; or one that is dark on a bright surface will be the easiest to detect in imagery.
- Objects that have distinct linear edges, such as cars, are easier to detect and resolve than are objects with fuzzy, wavy or ‘soft’ edges such as trees and bushes.
- As a very general rule of thumb, an object should cover about 10 pixels of an image for it to be truly resolvable–unless it is a unique feature such as a white parking line on a black parking lot. So for 1-m satellite imagery, a feature should cover ~10 sq m which is roughly the size of a car or light truck; and for 5-meter imagery, it should cover ~2,500 sq m which is roughly the size of a commercial building. If you inspect the images in our online gallery, you will see this rule of thumb works quite well.
- Adding the non-visible spectra (i.e. the near infrared band or more) to your visual analysis can help you detect features that you might not in natural color alone. This is a point however that warrants a complete G-FAQ of its own–so stayed tuned to future editions for an elaboration of this topic.
Until our next edition of G-FAQ, happy GIS-ing!
Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.
Find Out More About This Topic Here:
- Canadian Centre for Remote Sensing
Brock Adam McCarty
Map Wizard
(720) 470-7988
- Innovative monitoring concept combines daily coverage, weather-independent acquisitions and high-quality image analysis
- Customers appreciate fully tailored monitoring programs, timely email alerts, secure online access and comprehensive change reports
- 60 off-the-shelf, pre-selected monitored sites worldwide
Astrium Services’ GEO-Information team has now taken satellite-based monitoring to a new level. Based on cutting-edge satellite imagery and standard and advanced image analysis, processing and interpretation, the new service Go Monitor provides high-quality change information for any area of interest worldwide on a reliable and cost-effective basis.
No matter how remote or inaccessible a site may be, with daily revisit options and independent of weather conditions, Go Monitor supports users around the globe in their day-to-day operations. Go Monitor helps you to effectively monitor activities, to precisely understand the environment in which they operate and to take well-informed decisions.
- Defense & intelligence bodies observe infrastructure for effective targeting and identification of relevant assets
- Oil & gas organizations monitor exploration, production and facilities–both onshore and offshore–for the benefit of health, safety and environmental responsibility, as well as improved productivity and the fulfillment of external regulations
- Civil engineering companies monitor under and above ground construction of infrastructure, both existing and under development, to increase safety and performance
Go Monitor is a fully client-tailored service. Based on the individual area of interest, the type of change to be monitored and the project timeline and frequency, a monitoring program that best meets the client’s requirements is defined.
This unique service provides high-quality change information based on standard image analysis and advanced image interpretation by application-specific experts. The monitoring results are delivered as comprehensive and ready-to-use reports highlighting relevant changes in the area of interest and include the satellite imagery as well as the processing, interpretation and analysis by the expert.
When a new report is available, subscribers simply receive an email alert and can securely access them from anywhere, anytime through the Go Monitor web portal.
As an alternative, users may also opt for an off-the-shelf site monitoring solution. Over 60 hotspots around the globe are currently being regularly monitored, for example the Sepanggar Naval Base (Malaysia), the site of the Deepwater Horizon (Gulf of Mexico), the Baboungue forest exploitation site (Central African Republic).
Go Monitor relies on Astrium GEO-Information Services’ unique access to a multi-resolution, multi-sensor Earth observation satellite constellation containing both optical and radar satellites–recently enhanced by the new Pléiades 1A high-resolution optical satellite, and with three additional satellites scheduled to be launched within the next two years.
Through its GEO-Information services, Astrium is recognized as one of the leaders in the geo-spatial information market, not least thanks to the now fully integrated skills and resources of the former Spot Image and Infoterra. The company provides decision-makers with complete solutions enabling them to increase security, boost agricultural performance, maximize oil & gas or mining operations, improve their management of natural resources and protect the environment. It has exclusive access to data from the SPOT, TerraSAR-X and TanDEM-X satellites–and Pléiades, coupled with a complete range of space-based data sources and airborne acquisition capability allowing it to offer an unrivalled scope of Earth observation products and services. This extensive portfolio covers the entire geo-information supply chain, from the generation of images to the provision of high added-value information to end-users.
By leveraging the synergies and expertise available across the whole of Astrium Services, its GEO-Information teams develop innovative, yet competitive, bespoke solutions based on the combination and integration of Earth observation, navigation and high-end telecommunications.
For more information about Astrium’s Go Montior product, please contact the Apollo Mapping sales team at (303) 993-3863 or sales@apollomappoing.com.
In this monthly series, I turn my attention to one of the most powerful software packages for raster processing available–the Geospatial Data Abstraction Library (GDAL)–and as an added bonus, it’s free! Each month I focus on a different utility offered in GDAL, walking the reader through its applications and offering up a series of tips and illustrations so that you can emulate my work in your office and/or home. In this edition of WIG, I show our readers how to use GDAL to calculate aspect from a raster digital elevation model (DEM).
About GDAL
GDAL is an open source software application that was launched in 1998 and has been updated multiple times since. While the current version of GDAL (i.e. version 1.9) can be downloaded from multiple locations, I find this site to be the most up-to-date and easy to navigate. I suggest downloading the stable version of the MSVC2010 build for either 32-bit or 64-bit PCs depending on which you have access to. GDAL contains a wide array of utilities to help you process raster files. I find that GDAL is more stable and runs quicker than ArcGIS, ENVI and PCI for data production–although the toolkit is more limited than these applications. GDAL does not rate high for user-friendly functionality as it is command line driven (i.e. words and text, not mouse clicks); and this is the inspiration for creating the WIG series.
What Is Aspect?
When describing terrain, there are three crucial elements one needs to consider: (1) the elevation, which is provided as a raster DEM in this case study; (2) the surface’s slope or its steepness (we discussed the concept of slope in detail in last month’s WIG); and (3) its aspect or orientation. Aspect is the direction of the steepest downhill slope. It is reported as degrees (or radians) from the established zero marker (usually North) and is also called the azimuth angle. Aspect is an important consideration as it determines: the direction water will flow down a slope; what is visible from a given location; and the amount of sun and wind a site receives. Areas with no slope (i.e. that are completely flat) also have no aspect.
Calculating Aspect
To calculate aspect, I employed the GDALDEM functions–you can find out more about them here. These are the steps I took to complete the aspect calculation:
- I moved my DEM file, a digital terrain model (DTM) produced by DigitalGlobe with 2-meter resolution over Gadara, India, to a folder called, ‘Test,’ located the root of my C: Drive
- I chose a simple folder name and file location (i.e. C:test) for the data to make things easier when working with the command line interface of GDAL
- I also changed the name of the DTM file to ‘DTM.tif’ to make things easier when working with GDAL
- After starting up GDAL, I used the command: cdtest
- This command points GDAL to the folder I created with the DTM
- If you would like to get a list of the files in the folder you are working in, use this command: dir
- To calculate aspect in degrees, I used the following command: gdaldem aspect DTM.tif aspect1.tif
-
- In this command, the words ‘gdaldem aspect’ define the utility that GDAL will use for processing the data/li>
- ‘DTM.tif’ is the full name of the input (original) DEM file
- ‘aspect1.tif’ is the name I chose for the output raster file
- Commands can be added to end of this string to employ additional functionality:
-
- –trigonometric -> this will express aspect in radians
- –s scale=value : replace the word value with the proper scaling factor if the horizontal and vertib. –zero_for_flat -> replace 0 for default value of -9999 for flat areas, or areas with no aspect
Visualizing Aspect
Calculating aspect can an easier task than visualizing the results as aspect is a continuous variable, making it difficult to display with a color ramp. Consider a map of aspect with 360 shades of blue or 360 shades of colors from red to blue representing each degree of the compass rose; and now consider the challenge of determining slopes that face ‘north’ from those that face ‘east.’ Another challenge of visualizing aspect is that north, south, east and west are relative terms and so the range of degrees that each represents depends on the needs of the project. As such, for the rest of this WIG, I walk you through the steps I find best for visualizing aspect. I start with displaying aspect as a continuous color ramp and then conclude with the steps to classify it according to north, south, east and west.
To create an aspect map with a continuous color ramp, follow these steps in ArcMap 10.x:
- Right-click on the aspect layer and select Layer Properties.
- Now select the Symbology tab and then the Stretched option. It will ask you to built histograms, I said ‘Yes’ when asked to do so.
- Now set the Custom Settings for statistics (at the bottom of the window) to 0 to 360 as that is the range of values we focus on here. To have a truly flat area would be rare (i.e. a value of -9999) so I have not included instructions on how to handle flat areas in this WIG.
- Finally, select a color ramp. For this WIG, I use a light red to dark red color ramp.
The results of this continuous color ramp are shown as the first slide in the animation below. Next, let’s create a map with 4 color classes, one each for north, south, east and west, as this will create an easy to interpret map of the general direction a slope faces. For some applications, you may require greater fidelity, such as classes for north-east, south-west, etc., and the basic steps put forth in this WIG will help you through such a classification if that is your end goal. In order to create a 4-class aspect map in ArcMap, you can follow these steps:
- Return to the Symbology tab for the aspect layer and now select the Classified option.
- Push the Classify button and select Defined Interval from the drop down menu.
- 3. Select the Interval Size you would like, I used 90 in this case study to divide the compass rose into four even classes. Also, set the Exclusion values so that ArcMap only recognizes the range of [0, 360].
- 4. Now select the color ramp you like, I used the same light red to dark red ramp as in the aspect layer with continuous symbology. Choosing a light to dark color ramp makes it easier to interpret the four colors for each class, as north facing slopes would be the lightest and then west would be the darkest.
The results of this 4-class symbology are shown as the second image in the animation below. While it seems like we have reached the end of this case study on visualizing aspect, we are in fact a few important steps away. Let’s examine the results of the 4-class aspect map I created above. When I created the classes, ArcMap automatically assumes that 0 degrees is the starting point and then adds 90 3 times to create the final classes, so that:
North = 0 to 90 degrees
East = 90 to 180 degrees
South = 180 to 270 degrees
West = 270 to 360 degrees
But that is not correct, as you might realize, in that North in a 4 class system is generally thought of 315 to 45 degrees and so forth. ArcMap cannot handle making this modification in a clean fashion as it looks at 0 as the starting point for numeric calculations. To work around this, you can follow these steps:
- Open the Symbology tab for the aspect layer and select the Classified option again (if you are not already there).
- Set the number of Classes to 5, press the Classify button and then select Manual from the pull down menu.
- Now type in these 5 break values: 45, 135, 225, 315 and 360.
- Select the color ramp you like, I chose the same light to dark red ramp.
- The final step involves grouping the first and last class together as these cut across the 0/360 divider line for degrees on a compass rose. You can do this by holding down the Control Key and left-clicking on each class. Now right-click and go to Properties for Selected Colors; press More Colors and then Okay. This will make the first and last class the same colors.
What you have done now is create 4 color classes that represent these more intuitive compass rose ranges:
North = 315 to 45 degrees
East = 45 to 135 degrees
South = 135 to 225 degrees
West = 225 to 315 degrees
The results of this corrected 4-class aspect map are shown as the third and final image in the animation below. When you watch the short animation, you will see how important this correction is for understanding the direction a hill slopes, or its aspect.
GDAL is free and can calculate aspect from raster elevation data.
Brock Adam McCarty
Map Wizard
(720) 470-7988
Continuing our series on the use of RapidEye data in geospatial projects, for this edition I expand on a discussion started in February 2012, focusing on the value of RapidEye in vegetation analysis. This month, I filter and map a Red Edge Normalized Difference Vegetation Index (NDVI) calculated from 5-meter RapidEye imagery to make more practical use of the information it can provide.
The RapidEye Constellation
RapidEye is a constellation of five 5-meter medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers a daily revisit time to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a starting cost of $1.28 per square kilometer for all five spectral bands–academics receive a discount on this price. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data available in the red edge band allows users to extract more useful land ‘information’ than can be extracted from traditional 4-band imagery sources.
Red Edge NDVI
Red Edge NDVI is a way to assess the health of a plant or any living creature (such as cryptograms in the desert and microbes suspended in a water column) that contains chlorophyll. In the recent months, I have spoken with several academics who have tested imagery with a red edge band. They have found that Red Edge NDVIs have higher correlations with field measurements of plant health, and are working on academic publications with this evidence. If you would like more details on Red Edge NDVI and how it is calculated, please refer to my February 2012 article.
Putting Red Edge NDVI to Work
The Band Math function of ENVI 4.8 was used to calculate a Red Edge NDVI and then to color balance a natural color 5-meter RapidEye imagery collected over the San Luis Valley, Colorado on June 19, 2011. Exporting these layers as a GeoTIFF from ENVI, I moved over to ArcMap to finish off the analysis of the valuable information we have extracted with this Red Edge NDVI calculation.
The first step I took in filtering and displaying my Red Edge NDVI in ArcMap was determining the lowest NDVI value that ties to healthy, green vegetation. NDVI has a range of possible values from -1.0 to 1.0. To decide this value, I added my color-balanced natural color imagery as the top layer and then added the NDVI layer below. By clicking on multiple pixels with the Identify Tool that appeared to be on the edge of live-dead vegetation, a Red Edge NDVI value of 0.1 was the lowest I found for green-ish plants. As such, I used a NDVI value of 0.09 (to be on the safe side) or greater as the cut off for living vegetation. This value could have easily been adjusted upward or downward as the fidelity of the analysis required.
For the next step in this analysis, I created sequential classes of Red Edge NDVI values and then color coded them accordingly. To complete this step, I navigated to the Symbology Tab under the Layer Properties of the NDVI TIFF file. Now, I switched the symbology type to Classified and calculated histograms when an ArcMap warning to do such appeared. Pressing the Classify button, I then set the Exclusion values to -1.0 to 0.09. This tells ArcMap to filter out all values in this range when classifying the data into clusters of similar values. I then classified by Natural Breaks (Jenks) with 3 classes to show a schema with less ability to separate unhealthy vegetation from the most vigorous. Finally, I created a copy of this NDVI layer, followed the same steps above but this time created a classification schema with 7 classes. For both of these schemas, I chose the same color ramp whereby unhealthy vegetation was in red; the healthiest vegetation in bright green; and vegetation with intermediate health in yellow.
The results of this analysis show that there is more variability in plant health (even across a single field) than the human eye can detect. As more classes were added, the ability to determine areas that were healthier from those that were less healthy was enhanced. That said, there is certainly a limit to this fidelity that would need to be explored by comparing field measurements of plant productivity to Red Edge NDVI values. By doing this, you could determine what range of NDVI values (and at what time in the phonological development cycle) correspond to areas of less productive growth. Once identified, farmers and horticulturalists can target these locations with the necessary remedies–such as the addition of fertilizers and/or water–to assure the most abundant yield possible at the end of the growing season. What I have described here are the basic tenements of high precision agriculture which is an established method of farming in the US and many nations around the world. With RapidEye’s ability to collect imagery over large areas on a daily basis at a low price point, its value in high precision agriculture cannot be understated. That said, to make RapidEye a cost-effective solution for this purpose, your fields would have to cover an area larger than many family farms typically do.
Brock Adam McCarty
Map Wizard
(720) 470-7988
If you have never explored the free data offered up by the USGS’ EarthExplorer, I encourage you to do so. There is a wealth of free data available for free on EarthExplorer and not just of locations in the United States. In the recent months, the USGS added 180,000 scenes of OrbView-3 imagery to the archive of EarthExplorer. OrbView-3 is no longer operational but when it was, it obtained either 1-meter panchromatic (pan) or 4-meter multispectral (MS) imagery. OrbView-3 did not have the ability to collect both pan and MS data at the same time. This dataset of 180,000 scenes ranges in date from 2003 to 2007.
Here are several tips to get you started with your search for free OrbView-3 imagery:
- You can define your area of interest using lat/long coordinates, an address, by an entire county/state or by uploading a shapefile/KMZ.
- Before you complete your archive search, be sure to select OrbView-3 in the long list of search options under the “Data Sets” tab.
- When we searched by an entire county, it took quite some time to populate the results.
- Not all of the OrbView-3 data added to EarthExplorer is of high quality. So be sure to check out the browse images (click on the mini-JPEG symbol to see these) before you download anything. When we checked for coverage over our address in Boulder, Colorado, the only OrbView-3 dataset was 100% covered in clouds!
- If you do find coverage you want to download, you will need to register with the website and login to access the data.
Brock Adam McCarty
Map Wizard
(720) 470-7988
Pléiades 1A is up and running, collecting new 50-cm high-resolution imagery and accepting tasking orders. But what are you going to do once you get your brand spankin’ new data? Have no fear! The Exelis Code Library has you covered. You can download their Pléiades toolkit for ENVI 4.8/5.0 here.
The toolkit has directions whether you are using ENVI 4.8 or 5.0 and is easy-as-pie to install. Once you have the toolkit in the right folder, you will have access to the Pléiades add-on the next time you start up ENVI. You will be able to open a single Pléiades 1A image or tiled mosaic from the File menu. You can also orthorectify a Pléiades 1A image with or without ground control.
The Code Library once again saves the day, making our remote sensing lives easier and rescuing us from hours of frustration.