In a study completed by Douglas Luke, Emily Esmundo and Yael Bloom of Saint Louis University (SLU), the research team used GIS to assess the spatial distribution of tobacco billboard advertisements within different regions of St. Louis, Missouri. In 1999, the tobacco industry agreed to remove all outdoor advertisement of their products, and this study was completed in the period leading up to this mass removal campaign. Their intent was to assess if these tobacco advertisements were disproportionately located in poorer, more urban areas. According to Federal Trade Commission numbers, in 1996, tobacco companies spent over $5-billion dollars on advertising and promotions–$300 million of which was specifically spent on outdoor advertising. As government officials realized the possible link between outdoor tobacco advertising and the likelihood of youth picking up the habit, they used political pressure to ink this removal ‘agreement’ between producers/manufacturers and the Feds.

While the SLU study took place in the city and county of St. Louis, the city is an independent municipal entity and does not affiliate with the county on political and economic matters. The combined regional population consisted of 1.35 million people at the time of the study–of which 50% were white and nearly 48% were black within the city; but within the county, 84% were white and only 14% of the residents were black. Further, the average income in the county was twice that of the poorer city of St. Louis.

Over 1,200 miles of road were surveyed by the researchers for billboard placement and content. Of 1,239 non-blank billboards, 242, or nearly 20%, contained tobacco advertisements, making them the single largest category of ads. They also found that the billboards advertising tobacco were more likely to be located in the city, and specifically in the poorest areas of the city. Upon further analysis of the content on the billboards, the researchers noted that when placed in the sections of town that were predominately black, the models used on the billboards were also primarily black. There was also concern that 74% of billboards fell within 2,000 feet of schools, playgrounds and daycare centers where children were most likely to see them.

While wildfire is of great concern for numerous reasons, it also has ‘cleansing’ effects on the areas it clears. Aside from clearing out naturally-occurring debris, it also can eradicate insects and disease as well as stimulate new growth that provides essential nutrients to the habitants of the forest. This study also helped to assess the effects of urban sprawl on biodiversity and ecosystem health. Species loss can trigger a domino effect in the environment that leads to further decimation, disease and dispersal of native plants and animals. The more that humans encroach on naturally pristine areas, the more likely that area will eventually recede, naturally or by force of “progress.”

The removal of outdoor tobacco advertisements posed three questions for the researchers to consider:

  1. Since tobacco executives are not likely to decrease their advertising budget, where are they spending their money now?
  2. How is tobacco advertising on billboards executed in other parts of the world that do not have regulations?
  3. What is the effect of removing tobacco billboards?

As this study was published just one year after the ban went into effect, it did not get the chance to answer these questions. However, studies in many states have shown that youth smoking has dropped steadily over the last decade. The Center for Disease Control released a study that showed 18% of high school students smoked cigarettes in 2011, down from 19.5% in 2009 and way down from a high of 36% in 1997! In Hawaii alone, the number of youths who smoked dropped from 25% in 2000 to less than 9% last year–amazing progress to be sure. Even though we cannot definitively link these trends to the absence of tobacco-related billboards, we can assume that coupled with education and awareness, reducing the number of interactions with advertisements that glamorize smoking is certainly beneficial to curbing the habit in our youth.

As far as the rest of the world goes, it seems likely that tobacco executives will shift their advertising dollars overseas to promote this “western” ideal of being cool by smoking cigarettes in emerging markets with less regulation. The industry has also shifted focus to a new set of products that are just as addictive as cigarettes. Products such as Snus have become popular–a bagged tobacco that rests in the mouth and doesn’t require spitting as does ‘dip’ or ‘chew.’ Since it is still a tobacco product, Snus cannot be advertised in plain view–but the question remains who it is really marketed to in the plethora of other advertising mediums the industry still can access.

Justin Harmon

Staff Writer

With offices based in downtown Boulder, Colorado, the Apollo Mapping team is all too aware of the dry summer season that we are sweating our way through. There have already been three nationally televised fires on the Front Range this season: Waldo Canyon outside Colorado Springs; Flagstaff right outside Boulder; and the High Park Fire outside Fort Collins. Our friends at Astrium Services were kind enough to share a SPOT 5 image collected over the High Park Fire on June 19th when the fire was only 55% contained, and we put together several previews of this data to show our readers the extent of the damage.

SPOT 5 has been in operation since May 4, 2002 collecting 4-band multispectral imagery (Green, Red, Near Infrared or NIR, and Short Wave Infrared or SWIR) with a footprint that is 60-km wide. The images below feature 10-meter resolution with varying band combinations. In the first preview, we used a band combination of SWIR, Green and Red (ported as screen colors Red, Green and Blue respectively) to emphasize the active front of the High Park Fire which is obvious below rolling smoke in the SPOT 5 imagery.


© CNES 2012, Distribution Astrium Services / Spot Image S.A., France, all rights reserved

In the second preview, we used a band combination of NIR, Red and Green (ported as Red, Green and Blue), which is also called false color, whereby healthy vegetation is bright red while dead and burned vegetation is black. To give you a sense of scale, in the bottom right corner of this preview is Horsetooth Reservoir with Fort Collins just above.


© CNES 2012, Distribution Astrium Services / Spot Image S.A., France, all rights reserved

By leveraging the synergies and expertise available across the whole of Astrium Services, its GEO-Information teams develop innovative, yet competitive, bespoke solutions based on the combination and integration of Earth observation, navigation and high-end telecommunications.

To find out more about SPOT 5 imagery, give us a call at (303) 993-3863 or email us at sales@apollomappoing.com.

For this month’s Geospatial Frequently Asked Question (G-FAQ), I pivot to a topic that deserves more attention than it gets, and that is bit depth. Some of you may have heard this term when ordering imagery from Apollo Mapping or perhaps when downloading free Landsat data without understanding its implications. As such, let’s delve into this topic, addressing the following set of questions:

What exactly is bit depth and why is it important when ordering satellite imagery? Is 16-bit imagery harder to work with? When should I order 16-bit imagery versus 8-bit depth?

To start of this discussion, it is important to understand the difference between base-10 and binary number systems. In a base-10 system, each digit place in a number represents 10 possible values from 0 to 9 and then each successive digit place increases by ten-fold in its value. Let’s look at this mathematically:

Base-10 Number = 123

This can be written mathematically as: (1 x 10^2) + (2 x 10^1) + (3 x 10^0)

Which can be simplified to: (1 x 100) + (2 x 10) + (3 x 1)

And final to: 100 + 20 + 3 = 123

Given our familiarity with math since the early days of school, creating base-10 numbers is something we do seamlessly as opposed to writing out a mathematical formula as most beginners working with binary number systems do. In a binary system, each digit place only has two possible values, 0 or 1. This mimics a computer chip which can either be off (0) or on (1)–and this is the reason that computers are based around binary numbers at the system code level. So then, let’s see how a binary number is created mathematically:

Binary Number* = 111 1011

This can be written mathematically using base-10 numbers as: (1 x 2^6) + (1 x 2^5) + (1 x 2^4) + (1 x 2^3) + (0 x 2^2) + (1 x 2^1) + (1 x 2^0)

Which can be simplified to: (1 x 64) + (1 x 32) + (1 x 16) + (1 x 8) + (0 x 4) + (1 x 2) + (1 x 1)

And final to: 64 + 32 + 16 + 8 + 0 + 2 + 1 = 123

* In binary numbers, you add a space every fourth digit to the left of the decimal place.

By following steps similar to what I present above, you can convert any binary number to base-10–though going from base-10 to binary involves more effort, check this website out for more details on those steps.

Now that we have explored binary number systems, we can pivot our attention back to bit depth. Satellites are based on binary numbers and as such bit depth is measured accordingly. The bit depth of a satellite tells you the maximum number of values it can measure per spectral band. The higher the bit depth, the more information it can measure and thus the more sensitive the sensor is to different illumination values (typically called digital numbers) of the surface of the planet.

As we explained in more detail last month, a passive optical satellite measures the intensity of photons that are reflected from the surface of our planet. Take for example two hypothetical satellites, one with 8-bit depth and the other with 9-bit depth. The 8-bit depth satellite can measure up to 2^8 digital number values (or 256 values) for the intensity of photon reflection; while a 9-bit depth satellite can measure up to 2^9 values (or 512).

To look at that same hypothetical situation another way, for each value an 8-bit depth satellite can measure, the 9-bit depth satellite can measure two values. That means the 9-bit satellite is twice as sensitive in each of its spectral bands as is the 8-bit satellite. Now remember that most satellites offer at least 4 multispectral bands. As such, a 9-bit depth satellite can produce 16 times the number of RGB + NIR values for each pixel in 4 band multispectral imagery than can an 8-bit depth satellite–this has important implications I will discuss later in this G-FAQ series.


The table below shows the imaging characteristics of the most common satellite we work with and then the maximum number of spectral combinations possible per pixel. The final column shows the increase in spectral information as related to a traditional 4-band, 11-bit depth satellite such as IKONOS. You can see from this table that increasing the number of spectral bands has a much larger impact on the maximum number of spectral combinations than does bit depth.

 

It is important to note that rarely, if ever, will satellite imagery utilize the entire range of pixel values possible with its bit depth. Imaging companies such as DigitalGlobe make the conscience decision to ‘dampen’ satellite systems, assuring that digital numbers close to the maximum possible (i.e. 2047 for 11-bit and 4095 for 12-bit depth) for each pixel are rarely reached. When the maximum value is reached and/or exceeded, flares can occur which destroy the spectral information in this pixel and surrounding ones.

Now that I have explained the basics, let’s take a look at the bit-depth ordering options for satellite imagery. If you have ever placed an order with Apollo Mapping for imagery products, you may have noticed that the two options for bit depth are 8 and 16, not 11 or 12 as in the table above. The reason for defining bit depth in increments of 8 ties back to computer technology. A single bit of information–either a 0 or 1–is memory’s building block. Since the 1960s, it has been common practice for 8 bits to make up a single byte; so that 2 bytes is comprised of 16 bits of information.

As such, the binary digital numbers that are embedded in satellite imagery files (a TIFF usually) will either be 8-bits or 16-bits in length. In order to make 11 or 12-bit depth imagery 16 digits (or bits) long, 0’s are added to the front of the binary number so that the value itself remains unchanged. When 11 or 12-bit depth data is delivered as 8-bit depth imagery, the values are scaled so that each 8-bit depth pixel value represents multiple 11/12-bit depth values. Accordingly, 8-bit depth imagery will show less spectral variability. This 11/12-bit to 8-bit depth scaling process can also introduce additional signal noise. One term you might hear associated with 8-bit Red, Green, Blue (or Natural Color) imagery is 24-bits. They use this term as it is 3 spectral bands with 8-bit depth each, or 3 x 8 = 24-bit imagery.

In next month’s edition of G-FAQ, I will continue this discussion on bit depth by looking at the advantages and disadvantages of 8 and 11/12-bit depth imagery as well as provide recommendations on when to order each.

Until our next edition of G-FAQ, happy GIS-ing!

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here:

Brock Adam McCarty

Map Wizard

(720) 470-7988

brock@apollomapping.com

In this monthly series, I turn my attention to one of the most powerful software packages for raster processing available–the Geospatial Data Abstraction Library (GDAL)–and as an added bonus, it’s free! Each month, I focus on a different utility offered in GDAL, walking the reader through its applications and offering up a series of tips and illustrations so that you can emulate this process in your office and/or home. In this edition of WIG, I show our readers how to use GDAL to create a hillshade layer from a raster digital elevation model (DEM).

About GDAL

GDAL is an open source software application that was launched in 1998 and has been updated multiple times since. While the current version of GDAL (i.e. version 1.9) can be downloaded from multiple locations, I find this site to be the most up-to-date and easy to navigate. I suggest downloading the stable version of the MSVC2010 build for either 32-bit or 64-bit PCs depending on which you have access to. GDAL contains a wide array of utilities to help you process raster files. I find that GDAL is more stable and runs quicker than ArcGIS, ENVI and PCI for data production–although the toolkit is more limited than these applications. GDAL does not rate high for user-friendly functionality as it is command line driven (i.e. words and text, not mouse clicks); and this is the inspiration for creating the WIG series.


What Is a Hillshade Layer?

A hillshade layer is a way to visualize elevation data so that pixel values are based on the illumination intensity they would receive from a hypothetical sun. A hillshade is typically created in 8-bit format so that there a possible range of values from 0 to 255 for each pixel–with 0 representing total darkness and 255 representing complete illumination. To create a hillshade, users must input: (1) the azimuth of the ‘sun,’ or the cardinal direction it is pointing at the ground; and (2) the altitude of the ‘sun,’ or how high it is in the sky. For example, an azimuth value of 90 degrees means that the sun is pointing at the ground from the east, or is much like a morning time sun. And then combined with an altitude of 45 degrees, this would mean that the sun’s rays are coming at the ground from both the east and then from a tilted position in the sky. Azimuth and altitude are combined with calculations of slope and aspect to calculate a hillshade with illumination values that are dependent on the terrain of neighboring pixels. More specifics on the calculation of a hillshade layer can be found here.

Creating a Hillshade Layer

In order to create a hillshade layer, I employed the GDALDEM functions–you can find out more about them here. Here are the steps I took to calculate a hillshade:

  1. I moved my DEM file, a digital terrain model (DTM) produced by DigitalGlobe with 2-meter resolution over Gadara, India, to a folder called, ‘Test,’ located the root of my C: Drive
    1. I chose a simple folder name and file location (i.e. C:test) for the data to make things easier when working with the command line interface of GDAL
  2. I also changed the name of the DTM file to ‘DTM.tif’ to make things easier when working with GDAL
  3. After starting up GDAL, I used the command: cdtest
    1. This command points GDAL to the folder I created with the DTM
  4. If you would like to get a list of the files in the folder you are working in, use this command: dir
  5. To calculate hillshade, I used the following command: gdaldem hillshade DTM.tif hillshade1.tif –z 4 –az 90 –alt 45
    1. In this command, the words ‘gdaldem hillshade’ define the utility that GDAL uses to process the data
    2. ‘DTM.tif’ is the full name of the input (original) DEM file
    3. ‘hillshade1.tif’ is the name I chose for the output hillshade raster file
  6. I also used a series of extra commands added to end of this string to employ additional GDAL functionality:
    1. –z -> this is a multiplier to exaggerate the affects of elevation on the hillshade
    2. –s scale=value : replace the word value with the proper scaling factor if the horizontal and vertib. –zero_for_flat -> replace 0 for default value of -9999 for flat areas, or areas with no aspect
    3. –az -> this is the azimuth of the sun, whereby 0 means the sun’s rays are hitting the DEM from the north, 180 when the sun rays come from the south and so forth
    4. –alt -> this is the altitude of the sun, whereby 0 means the sun is flat to the horizon and 90 means the sun comes from right above the DEM

Visualizing a Hillshade Layer

If you are a regular reader of WIG, you may remember the plethora of issues one can encounter when visualizing aspect, given the continuous nature of this variable and the way that ArcGIS functions. When it comes to a hillshade layer, visualization is a more straight forward process. As such, I focus on the impact of azimuth on hillshades for the remainder of this edition of WIG.

In order to explore the impacts of azimuth, I created four hillshades with GDAL: one with the sun rays coming in from the north (i.e. –az 0), one from the east (i.e. –az 90), one from the south (i.e. –az 180) and one from the west (i.e. –az 270). I then brought each of these hillshades and the source DTM into ArcMAP 10.0. For this article, I colored the DTM with a simple black to white ramp, setting black as the lowest elevation. To do this, I used a process similar to what is put forth in this edition of WIG.

Next, I used the same ArcMAP procedure and black to white color ramp to visualize each of the four hillshades. The black to white color ramp matches the impacts of illumination: with black shades representing surfaces with less illumination (i.e. dark surfaces), and white shades representing those with more illumination (i.e. bright surfaces). As a final step, I moved the hillshades in the Table of Contents so that they overlaid the DTM. Now I set the transparency of each layer to 75% by going to ‘Properties’ (right-click on the layer name) and then ‘Display.’ This step helps to make a more photo realistic view of the terrain. The animation below shows you the four hillshades I created by changing the direction of the sun rays from North to East to South to West.


Click the image above to see an animation comparing the four hillshades I created for this edition of WIG. (DTM Source: DigitalGlobe)

What should be apparent from this animation is the large influence the sun’s position (i.e. its azimuth) has on the illumination of terrain. As I altered the azimuth used in GDAL’s hillshade calculation, the position and direction of the shadows shifted as one would expect to see in the morning (an easterly sun) versus the afternoon (a westerly sun). For those looking to explore this topic in more depth, I encourage you to see how altering altitude and the z- exaggeration factor changes hillshade results.

Brock Adam McCarty

Map Wizard

(720) 470-7988

Brock@apollomapping.com

For all you open source enthusiasts, this month’s Free For All is for you! Esri has a free add-on for editing OpenStreetMap (OSM) using ArcGIS Desktop. OSM is a database of geographic data that is free and shareable. This open source project gives the power to create maps to ordinary people across the globe. People can create and share detailed maps of their local geographies and communities. OSM can be used by anyone, in any fashion since the data is free.

The Esri add-on allows you to download and upload OSM data within an ArcGIS environment. It also includes faster editing with OSM symbology along with a geodatabase schema that is OSM-compatible and can be stored locally. After editing the geographic data, it can be posted back to OSM and made available to other users.



The editor can be used for other OSM projects such as OpenWheelChair, Humanitarian OSM Team and OpenSeaMap. The add-on is easy to install and pop-ups a nice post-install window to help users with their next steps. You can find the download page along with documentation for the ArcGIS Editor for OpenStreeMap add-on here.

Have you been looking for nighttime satellite imagery that dates back to 1992? Or perhaps you are interested in population growth around the Globe? If so, NOAA has a dataset you need to check out: global mosaics of the DMSP-OLS Nighttime Lights Series. This dataset features 30-arc second pixels and extends back to 1992 spanning six versions of the DMSP satellites. You are able to download the raw data used to create these global mosaics from this website, though admittedly I had a hard time getting access to any data in a useable format. There are also a variety of online maps as well as WMS and WCS portals that give you access to the various products offered from the DMSP satellites.


Click on the image above to see an animation comparing nighttime lights over the East Coast of China from 1992 to those in 2009. The growth in nighttime lights (or urban areas) is dramatic for such a short time frame. This animation shows average night lights so that a light that is only visible 50% of the time has had its intensity (or brightness of the white value describing the pixel) scaled accordingly. (Data Source: NOAA)

 

Until my next edition of Free For All!, happy hunting for free GIS data!

Brock Adam McCarty

Map Wizard

(720) 470-7988

brock@apollomapping.com

In this monthly article, we provide details on updates released each month to Astrium GEO’s 2.5-meter (m) SPOTMaps product. SPOTMaps is an orthorectified natural color imagery layer with coverage over more than 100 countries–totaling an impressive 84 million square kilometers (sq km). For projects requiring a value-priced basemap better than what 15-m Landsat can offer, there is no other choice than SPOTMaps.

SPOTMaps Updates–July 2012

  • 10 markets, including:
  • Canada
  • China–Shaanxi province
  • Iran
  • Italy
  • Morocco
  • Republic of South Sudan

For those who have never worked with SPOTMaps, below is a summary of key product specifications as well as product differentiators.

 

Key Product Specifications

  • Resolution: 2.5-m
  • Spectral Bands: simulated natural color (RGB)
  • Horizontal Accuracy: 10 to 15-m RMSE (root mean square error)
  • Projection/Datum: UTM WGS84
  • Source Data: SPOT5 satellite imagery
  • File Format: GeoTIFF

 


Product Differentiators

  • Recent and ready for immediate delivery and integration with your GIS
  • Seamless, orthorectified coverage across countries and entire regions
  • Suitable for work up to 1:10,000 scale
  • Custom product framing with minimum orders of ~100 sq km
  • Product series is updated every month
  • Source data can be delivered with all SPOTMaps mosaics
  • Volume and academic discounts are offered
  • Multi-user license are available

 

The map below has been color coded to show the collection year which makes up the majority of each SPOTMaps mosaic as well as those markets that were updated this month. An Apollo Mapping representative can provide more details on the specific year ranges used in each mosaic.


If you would like pricing details and/or additional product details, such as date ranges and accuracy specifications, please let us know at sales@apollomapping.com or (303) 993-3863.

As approved resellers of DigitalGlobe, Apollo Mapping is proud to offer imagery products from the first-ever 30-centimeter (cm) natural color orthoimagery layer covering the lower 48 states of the United States of America as well as significant portions of Western Europe. Scheduled to be completed by mid-2012, this impressive dataset will cover more than 10 million square kilometers (sq km) with an additional 6 million sq km of updated imagery to be collected over the next 30 months. Microsoft and DigitalGlobe have partnered on this long-term project, utilizing an exclusive aerial sensor–the UltraCamG–to collect the most accurate and visually appealing imagery available on the market.

The data included in the Precision Aerial imagery program can be grouped into three categories according to its collection and production specifications:

  • High Value Areas (HVAs)
    • These are dense urban centers and tourist destinations
    • No clouds, cloud shadows, haze, smoke or pollution
    • A horizontal accuracy of 2.7-meters (m) Circular Error 90% (CE90%)
    • Leaf-off is required
    • Free from standing water with only permanent snow and ice
    • Data is processed and color balanced across the entire market
  • Standard Blocks
    • These are often suburban areas and smaller cities
    • No clouds, smoke or pollution; and less than 2% cloud shadows and haze
    • A horizontal accuracy of 4.0-m CE90%
    • Leaf-off is desired
    • Data is processed and color balanced by one-degree cells (~10,000 sq km)
  • Remote Blocks
    • These are rural areas
    • Minimal amounts of clouds, cloud shadows, haze, smoke, pollution, standing water, snow and ice
    • A horizontal accuracy of 5.3- m CE90%
    • Leaf-off is not available
    • Data is processed and color balanced by one-degree cells (~10,000 sq km)

The following specifications are universal across the Precision Aerial imagery dataset:

  • Both 30-cm natural color and 60-cm color infrared (CIR) products are available
  • Color balanced, seamless orthomosaics
  • A projection/datum of UTM WGS84

In this regular monthly piece, we will provide our readers with an update on the progress of DigitalGlobe’s Precision Aerial imagery program, current coverage maps and full resolution previews of the data. If you would like more details on the coverage available in your area and/or on the pricing of the various delivery options, an Apollo Mapping representative would be happy to assist and can be reached by phone at (303) 993-3863 or email at sales@apollomapping.com.

July 2012–Coverage Statistics & Maps

  • 10,500,000+ sq km of 30-cm natural color and 60-cm CIR data acquired
  • 10,000,000 sq km –loaded on DigitalGlobe’s cloud and streaming web services
  • Key Areas Completed Acquisition in June
    • Standard blocks covering:
      • Part of the historic region of Castile, Spain–including the capital, Burgos
      • Roughly half of the island of Sicily, Italy
    • Zurich, Switzerland (HVA

In the coverage maps below of DigitalGlobe’s Precision Aerial imagery over the United States and Europe, we have indicated the outlines of the HVAs and blocks that are a part of this program. Each of these outlines is color coded to indicate the last year data was acquired in this area.