• If the amount of news you can find on the internet is any indication of a trend’s popularity, then it would seem that there is real interest in emerging biofuel technologies. The Department of Energy recently awarded $5.7 million to study guayule as a new source of biofuel. Guayule is a drought-tolerant plant that is native to the US and can be grown on marginal lands, thus it is not competing for the limited space available for agriculture. Guayule is a particularly economically-attractive two-for-one plant as latex can be extracted before a powdered biofuel is created which can yield approximately the same amount of energy to charcoal on a pound-by-pound basis.
    Scientist at Stanford and Pennsylvania State Universities have taken a different approach to the production of ‘biofuels.’ They use a biofilm containing a mixture of microbes known as methanogens to take electricity and convert it to methane gas. By connecting the methanogens to an electric current created by renewable wind or solar power, they are able to convert this energy–with an impressive ~80% efficiency–into ‘green’ methane, the key ingredient in natural gas which we commonly use to heat our homes, cook our meals and could use to drive our cars.And finally, a research team at Michigan State University has developed a technique that could significantly improve the efficiency of ethanol production. The team has developed a custom blend of bacteria that are able to breakdown corn stalks, stems and husks (i.e. corn stover) more efficiently through a biochemical fermentation process. This process also releases byproducts that can be used to generate hydrogen gas. By combining these two steps, the team believes it can capture up to 73% of the energy contained in corn stover versus a maximum capture rate of up to 4.5% with current fermentation technologies.
  • Have you checked out ArcGIS Online recently? If not, you should do so the next time you open up ArcGIS as the amount of free geospatial data that you can access with a few mouse and keyboard clicks is truly astonishing. You can access ArcGIS Online very easily by going to the File Menu in ArcGIS 10.x and then to ArcGIS Online. For instance, the very specific search, “Colorado schools,” yielded 34 results with a wealth of information on school district boundaries, demographics and universities located in the state. Admittedly of these 34 results, only about 2/3 were actually on topic so be sure to look at the descriptions of each layer before you spend the time loading it through streaming services.

    This map was created with free demographic data offered in ArcGIS Online. Once the map layer is loaded, you are able to query each school district polygon to discover a wealth of demographic information on its students.
  • How much energy does the internet use? Guessing that is not a question you have asked yourself recently but the answer is rather shocking. A single 10-megawatt data center which houses a very tiny portion of the total information on the internet can use as much energy as a small American town. When you consider that there are 500,000 data centers in the world, that puts total energy use at approximately 406 terawatts per year, or ~2% of the total power used each year in the world. And with the explosion of the internet and the amount of data on it, this figure will only increase in the coming years.
  • Whether you think humans are the main cause of global climatic change or not, there is absolutely no question that our planet has warmed during our lifetimes with drastic impacts on our Arctic regions. This year has seen two more record lows set in the Artic Sea as we have reached the minimum ice extent (just under 4 million square kilometers) and volume ever seen. If this trend continues, we will see completely ice-free summers in the Arctic by 2030, which is far sooner than the end of the 21st Century as scientists had predicted in 2007. While the melting of the Arctic ice mass in of itself will not have a major impact on global sea levels, it could accelerate a similar trend we are seeing in Greenland which would have a major impact. In fact, many major metropolitans around the world are already planning on the continued rise of sea levels, for instance engineers in New York City are studying how it could impact the Subway system.
  • For many Americans, the goal of energy independence has both economic and global security implications. In order to achieve independence, we obviously need to generate the power we consume right here in the US through a mixture of non-renewable and then increasingly renewable resources. While increased fossil fuel production is one way to achieve energy independence in the short term, another important factor to consider is the average fuel economy of the nation’s fleet of cars and trucks. To that end, the Obama administration made a major stride forward as it finalized regulations which will require automakers to sell a combination of cars and trucks with an average fuel efficiency of 54.5 miles per gallon by Model Year (MY) 2025. Those purchasing MY2025 cars will save a combined $1.7 trillion and this change alone will reduce oil consumption by 2 million barrels per day.

Brock Adam McCarty

Map Wizard

(720) 470-7988

brock@apollomapping.com

Kite aerial photography (KAP) is a form of small-format aerial photography (SFAP) that has been used quite often in the last several decades. Currently in vogue in the golf course management industry, it is used to monitor topography, soil erosion, drainage and vegetation growth. Researchers at Emporia State University in Kansas went to several golf courses in the state to assess problems that golf course superintendents have with course management issues. In dry regions of the state, courses have trouble allocating the water they need to keep the greens, well, green. At Southwind Country Club outside of Garden City, Kansas, they rely on excess water from the housing division that borders the course; however, future availability of this source is of great concern. The Emporia State researchers used KAP to evaluate irrigation at peak growth times.

Golf courses are a sizable industry in the United States, and according to the National Golf Foundation, there are some 18,000 courses dispersed through the States where golfers spend some $25 million annually on their practice of the sport. With many of these courses residing in areas where there is limited fresh water to sustain the beautiful landscaping that is expected on most courses (i.e. Las Vegas), the future of the sport may rely on better management and resource practices to provide the experience that golfers expect.

KAP is a low-height, high-resolution aerial photography solution with reasonable costs. It will allow superintendents to monitor species fairway encroachment, measure degree of shade from tree canopies and track changes to green dimensions by shifts in mowing patterns. At Southwind, the course is constructed on a rolling sand hill terrain, and the native vegetation is san-sage prairie. Irrigated bentgrass fairways and bluegrass roughs contrast sharply with sand-sage prairies on the infrared photography, allowing for greater ability to differentiate between species overlap and encroachment.

The bentgrass fairways are susceptible to a condition called “localized dry spot,” where soil surfaces are effectively water-repellent which can lead to winterkill. Using KAP, the researchers were able to establish which areas had fallen victim to winterkill; and to implement a plan to remediate and reseed the areas in an attempt to prevent future issues. After irrigation plans were modified and areas reseeded, the occurrences of winterkill diminished the next season; and this was confirmed through KAP.

Justin Harmon

Staff Writer

Our Small World sticks with the Spanish dialect theme this month as we venture from Havana, Cuba to our next destination, Oaxaca, Mexico. Oaxaca is both the name of a Mexican state, as well as its capital which is this month’s focus for Small World. The state of Oaxaca resides in the southwestern portion of Mexico, surrounded by the states Guerrero, Puebla, Veracruz and Chiapas. It is also known for its beachfront property courtesy of the Pacific Ocean. The city of Oaxaca de Juarez resides in the Centro District near a valley created by the Sierra Madre del Sur and Sierra Madre de Oaxaca ranges, and is also near the Atoyac River. The name Oaxaca comes from the Nahautl word Huaxacac which means “the nose of the squash.”

The original inhabitants of the state were from the Mixtec and Zapotec civilizations. Mixtec is loosely translated as “cloud people,” and Zapotec as “inhabitants of the place of sopote,” a soft, edible fruit that grows locally. In pre-Columbian times, the Mixtec was one of the largest civilizations of Mesoamerica. Their language was spoken by an estimated 300,000 people as recently as the late 20th Century, though the majority of those also spoke Spanish as well. The Zapotec were comprised of four different groups, but only two groups were germane to Oaxaca: the serranos of the northern hills of the Sierra Madre de Oaxaca, and the Central Valley Zapotecs who live near the Valley of Oaxaca. It is estimated that there were over 60 variations of the Zapotec language in its prime.

The Aztecs moved into the valley in the mid-1400s, and this is the time the area earned its present-day name. In the 1500s, the first Spanish expedition to the area arrived. Working in tandem with the Aztecs under the rule of Montezuma II, Hernan Cortes descended upon Oaxaca because of the reported existence of gold. Cortes ruled the region with an iron fist, and through cunning interaction with the Spanish Crown, he earned the title of Marquis. He expelled those native to the area, and taxed others heavily to stockpile his own treasures. Eventually Cortes would be removed of his position when Oaxaca was elevated to the status of a city and therefore subject to direct Spanish rule.

Today, Oaxaca is known as a tourist destination. One of its bigger draws is the Guelaguetza, a festival that takes place on the last two Mondays in July. The celebration is a commitment to local indigenous cultures and a celebration of sharing. Citizens of Oaxaca will do good deeds for others in lieu of payment, but with the expectation that a good deed will be done for them in the future. One famous example is the mason who builds a new oven for a baker, with the implied return favor of the baker making wedding cakes for the mason’s daughters when it comes time for them to marry. In recent years there has been some issue taken with the commercialization of the festival, and many hope for a return to the roots and original intention of the festival–to celebrate their culture and community.


The Auditorio Guelaguetza, pictured above, is an outdoor auditorium that sits on a hill in Oaxaca city called Cerro del Fortin. Built in 1974, the theater seats nearly 11,000, and is commonly used for the Guelaguetza dances held the last two Mondays in July, but is home to numerous other performing arts and cultural festivals throughout the year as well. It shares the hill with other architectural occupants: the Observatorio Astronómico; the Planetario; and the Parque Ecológico Cerro del Fortín, thus making this a center for leisure and science, as well as a hot spot for tourism.This 60-cm QuickBird image is courtesy of DigitalGlobe and Photo Enhanced by Apollo Mapping. Image captured on January 12, 2004.

Oaxaca also has other festivals that celebrate their heritage, most notably: el Noche de Robano (night of the radish) where local artisans show off their artistic ability by decorating large radishes near Christmas time; and the legend of the Zapotec Princess Donaji. When at war with each other, the Mixtecs took the Zapotec princess, killed and buried her, though the head was buried separate from the body. Allegedly, a shepherd came across a Madonna Lilly while tending to his flock, and instead of just plucking it, he dug it up to the roots so that he could replant it near his home. At the bottom of the root, he came across the head of the princess, and she is now celebrated annually. A depiction of her head is also on the coat of arms of the flag of Oaxaca.

Oaxaca is also known for its beautiful architecture as evidenced by some of its many churches. One of the more famous is the Santo Domingo de Guzman Church located just minutes away from the Catedral de Oaxaca (a seat of the Roman Catholic Archdiocese), and is one of the older churches still standing in the city. Construction began in the late 16th Century and it took nearly 200 years to build the church and monastery. The monastery was active from 1608 to 1857, but is now home to the Cultural Centre of Oaxaca. From 1857 to 1994 it was occupied by the Mexican Army, but under protest from the government and citizens of Oaxaca, it was returned to its original intention, a place of worship. While the temple is still open for worship today, there are numerous restrictions due to the frailty of the compound’s architecture, its possessions and the high level of respect associated with it due to its age and prevalence in Mexican religious history.


Christianity dates back some 2,000 years, and during its time as one of the world’s major religions, it has acquired some amazing works of art dedicated to its creed. One of those is the Church of Santo Domingo de Guzman in Oaxaca, Mexico. The original construction on the church and monastery started in the late 16th Century, nearly 500 years ago. You can see here why it is held in such high regard. 60-cm natural color image courtesy of DigitalGlobe and Photo Enhanced by Apollo Mapping. Taken January 12, 2004 by QuickBird.

To borrow from the New Mexico state motto, Oaxaca appears to truly be a land of enchantment. With rich culture and stories of mystery from the past, Oaxaca is a place of tranquility and one to appreciate. With vibrant architecture, beautiful environment and a sense of another time, the city offers an escape that is unique to the passionate traveler.

Justin Harmon

Staff Writer

People have been excited about the potential of wind energy for a while now. And while in some regions of the world it is effective due to a consistent supply of strong gusts, in other areas the efficiency has been called into question. A watchdog group in Idaho even has its own website against wind energy called, sWINDle, stating that its intermittent output does not meet peak demands, and that the whole technology is a waste of money. Well, I don’t know if that is true, but there is definitely a need for research to increase the capture and production efficiency of wind energy.

What has come to light of late is the idea that wind turbines may be able to solve two problems at once: clean energy and clean water. French company Eole Water is working on this technology and one of its prototypes is producing interesting results. In even the driest climates, their design is able to condense humidity that lives in the wind. In Abu Dhabi, the Eole prototype collected over 16 gallons of water in one hour from one unit! This technology has unbelievable potential as over 20% of the world does not live near a fresh drinking water supply.

Their wind turbine, the WMS1000, is powered by a 30-kilowatt solar panel and can also be connected to existing power grids. The company’s founder, Marc Parent, says he got the idea from the condensation accumulation on his air conditioner while living in the Caribbean Islands. Air is sucked into the turbines nose and through a cooling compressor which extracts moisture from the air. The condensation then runs down stainless steel pipes to its base where an in-house filtration and purification system resides.

The current prototype has an estimated maximum water production of 1,000 liters per day. But its potential in water production is also matched by its price tag–approaching $800,000 in some instances. As with all new technology, early adopters will bear the brunt of the development costs and prices will fall quickly as more units are sold.

Because the WMS1000 creates fresh water, it offers budding hopes for places that currently rely on wells, desalination and/or lake pumping. And for many of these people, the future could hold a time when fresh water just isn’t available due to its proximity or cost as the company expects that fresh water needs will grow by 130% by 2030. Since water distribution relies on a centralization process, it is costly and inefficient. Eole hopes that the large upfront costs for the technology can be offset by reduced infrastructure and transportation costs which accompany fresh water distribution currently.

An Australian man is also working on his own wind to water system called Max Water. Max Whisson notes that water exists around us all the time. On hot, humid days, water vapor can make up as much as 6% of the air we breathe. At any given time, there exists about 10,000 billion liters of water in the world’s air, and this vapor is replaced every couple of hours as part of the water cycle. Another company called AquaMagic has a system similar to Whisson’s that is also considerably more affordable than Eole’s at about $28,000 dollars. It can produce about 120 gallons in 24 hours, but requires about 12 gallons of diesel fuel to run. These emerging wind technologies give us water for thought, and I’ll drink to that.

Justin Harmon

Staff Writer

In this monthly feature, we span the globe to examine Our Changing Landscape with time series of medium resolution RapidEye satellite imagery. The RapidEye archive dates back to late 2008 and already contains more than 3 billion square kilometers of data. This month, we travel to the Far East and look at urban development in Beihai, China.

The RapidEye Constellation

RapidEye is a constellation of five 5-meter medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers a daily revisit time to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a base price of $1.28 per square kilometer for all five spectral bands–academics receive a discount on this price. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data available in the red edge band allows users to extract more useful land ‘information’ than can be from traditional 4-band imagery sources. When RapidEye imagery is ordered as a Level 3A Orthorectified product, images from multiple dates are extremely well registered, making it the ideal data source for Our Changing Landscape.

Urban Development in Beihai, China

Beihai is a prefecture-level city which is equivalent to creating a government administrative unit around New York City which would include the 5 boroughs plus the surrounding suburbs and rural areas. Beihai covers 3,337 square kilometers of coastal and interior lands along the Gulf of Tonkin in the southern Chinese province of Guangxi. In 2010, the population of the region stood at 1,539,300 and is expected to grow by approximately 10.5% over the next eight years; making Beihai the fastest growing city-region in the world according to some estimates.

Even if the region is not the fastest growing in the world over the coming decade, it will certainly see stunning growth fueled by massive government investments. Located along the Silk Route and home to a major shipping port in Binzhou, Beihai is situated close to Vietnam, Hong Kong and Macao which are key trade and tourism generators. The region also has abundant natural resources, for instance the Shengli Oil Field which is the second largest in China, major salt mines and vast (but not yet tapped) wind power. There is also abundant open land around Beihai which is a true commodity in a nation of 1.3 billion plus. In an area referred to as the Beihai Newly Developed Area, there are a plethora of major infrastructure projects that planned and/or underway–including highways, railways, shipping yards and power plants–that will foster significant development of the region’s manufacturing hubs.

China has shown significant commitment to growing its energy and transportation infrastructure even during the Great Recession that stymied economies across much of the planet. In 2008 alone, the Western Development Bureau of China, which helps to oversee and accelerate urban growth in Beihai, launched 10 major transportation projects totaling more than $64 billion while our US economy was in the midst of serious job losses. And the significant urban growth in Beihai is very apparent in the RapidEye imagery stack that follows.


Click on the image above to see an animation of 5-meter natural color imagery collected over Beihai, China on 10/6/2009, 11/9/2010, 10/16/2011 and 7/3/2012. During this three year time span, you can see significant growth of urban structures in the city to the top left of these images. You can also see significant progress on the transportation project at the center, particularly from 2011 to 2012. The growth in this time period measured a combined ~4.3-kilometers long and ~100-meters wide. (Images Courtesy: RapidEye)

If you would like to find out more about using RapidEye for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.

Starting September 2012, DigitalGlobe changed the minimum order size for all tasking to 100 square kilometers (sq km). This creates an easier pricing model for our imagery clients as in the past there were minimum order prices which often created confusion. Further, this change creates a more realistic pricing model to get 8-band WorldView-2 orders collected over minimum size polygons.

Here is a summary of the minimum order sizes for all DigitalGlobe tasking requests:

  • Select, Select Plus and Assured Tasking–mono mode
    • 100 sq km
  • Advanced Ortho and Elevation Series products
    • 100 sq km
  • Select / Select Plus Tasking & Archive–stereo mode, ortho ready products only
    • 100 sq km
  • Select / Select Plus Tasking & Archive–stereo mode, basic products only
    • 210 sq km

In most cases, we can honor quotes for tasking orders that were made prior to September 1st. Please contact the Apollo Mapping sales team at (303) 993-3863 or sales@apollomapping.com with any questions you might have about this policy change.

For our Apollo Mapping clients who ordered 3A ortho RapidEye imagery produced both before and after August 1st, you may have noticed a simplified naming convention for the datasets. This was done to make product naming easier for clients purchasing large multi-temporal datasets.

The new naming convention is as follows for RapidEye 3A products:

< Tile ID >_< Collection Date >_< Satellite ID >_3A_< Order ID >

As an example, here is a hypothetical new name:

1422345_2012-04-18_RE1_3A_442211

The new conventions are carried through to all of the metadata, license and product files that are part of the standard 3A product delivery. These changes will have no impact on major remote sensing and GIS software packages.

Let us know if you have any questions about these changes by email at sales@apollomapping.com.

For this month’s Geospatial Frequently Asked Question (G-FAQ), I shift gears slightly from my normal approach with a primer on using a data in a commonly used software application. We have seen an increased interest in using 5-meter natural color RapidEye imagery as a back drop in movies, ads and apps for large-area coverage; however working with this data in Photoshop, a very common graphic design software package, is not as straight forward as it may seem. And when you need to get your project done yesterday, even a five minute delay is too long to wait!

As such, this G-FAQ will address this core set of questions:

Why is RapidEye imagery challenging to work with in Photoshop CS5? How can I open RapidEye imagery in Photoshop CS5? Are there any suggestions you can offer to color balance the data once it is opened properly?

While RapidEye is easy to work with inside of GIS and remote sensing software, it is not as easy to work with when you move over to a graphics editing package such as PhotoShop CS5. Here are the three key challenges you will face in Photoshop and very likely other graphics packages:

  • RapidEye imagery has 5 spectral bands and as such Photoshop is unable to load properly as red, green and blue natural color data.
  • RapidEye imagery starts with 16-bit depth so it will need to be color balanced. See our recent G-FAQ series for more details on the implications of and working with 16-bit data. Color balancing imagery with clouds can be particularly difficult as clouds are extremely bright white which can wash out areas without cloud cover in automated color balancing techniques.
  • A single 5,000 pixel x 5,000 pixel raw 16-bit RapidEye imagery tile is about 240 megabytes (MB) making them more challenging to work with than smaller 8-bit files.

Now that I have given you sense of the challenges of working with RapidEye imagery in Photoshop CS5, let me explain the solutions! What follows below is a high level summary of the steps you will need to take in order to load, view, color balance and export your processed RapidEye imagery. Given how finicky Photoshop can be, for more exact visual instructions, you will want to check out the two in-depth video tutorials that follow these instructions.

  1. Load the TIFF RapidEye file you downloaded in Photoshop. It will be named with a long string of numbers and letters. When it loads, you will see five Channels called: Grey and Alpha 1, Alpha 2, Alpha 3, and Alpha 4.
  2. Select the entire Grey Channel and copy it. Now you will need to create a File -> New workspace and use the parameters from your Clipboard. It will set most everything correctly (i.e. 5000 x 5000 pixels and 72 DPI for a single 3A RapidEye ortho tile), but you will need to change the Color Mode to RGB.
  3. In the new workspace you have created, make sure you turn on the single Blue Channel (by pressing on the Eyes in the Channel sidebar) and copy the Grey Channel from your 5-band RapidEye raw data here.
  4. Go back to the raw RapidEye imagery, select the Alpha 1 Channel, copy it and then paste it in your new workspace as the Green Channel.
  5. Repeat Step 4 by copying the raw Alpha 2 Channel and pasting into your new Red Channel.
  6. You have now created a RGB (natural color) layer stack from your 5-band raw RapidEye data. The next step is color balancing the data. See the section the follows the video tutorials for more advice on color balancing data in Photoshop CS5.
  7. Once you have color balanced your RapidEye imagery as you see fit, the final step is changing your Image -> Mode to 8 Bits/Channel and saving it as a new TIFF file. When you do this, you reduce the file size and ‘lock’ in the color balance. Now you can open the new TIFF file in any program that works with this format and the colors will look exactly as you just set them.


Click the image above to watch part 1 of a two part video tutorial on working with RapidEye imagery in Photoshop CS5. In Part 1, I show you how to open and create a RGB layer stack from raw 5-meter RapidEye data. (Data Credit: RapidEye)



Click the image above to watch part 2 of a two part video tutorial on working with RapidEye imagery in Photoshop CS5. In Part 2, I show you how to color balance and export the RGB layer stack created in Part 1. (Data Credit: RapidEye)

Tips to Color Balance RapidEye Natural Color Imagery in Photoshop CS5

To conclude this edition of G-FAQ, I will provide you with a list of tips to color balance your RapidEye imagery in Photoshop CS5. As colors are extremely subjective, I suggest you experiment with multiple filter combinations to get the exact effect you are looking for. And for many of you out there, your skill set with Photoshop is much more extensive than my own so I apologize up front if all of these tips are mundane.

  • The easiest set of filters to apply to your RapidEye imagery are the Auto Tone, Auto Contrast and Auto Color options found under the Image menu. I have found that the order you apply the three Auto filters matters, so that is something to experiment with on your own. For many users, these filters might be sufficient for color balancing your RapidEye imagery.
  • If the auto filters are not enough, the next place to go is the list of options found under Image -> Adjustments. In the Levels, Exposure, Color Balance and Hue/Saturation options, you will find a list of preset options in a pull down menu–give them a try to start. Be sure you have the Preview option on so you can see your changes in real time. I zoomed into the full pixels before I tested these filters out to see exactly what my changes were doing to the colors in the RapidEye imagery.
  • Under the same Image -> Adjustments menu, you can try out the Vibrance and Brightness/Contrast options. These are slider bars that you can test out and preview in real time.
  • And finally, a word to the wise, if there are clouds in your RapidEye imagery, the auto filters will more than likely create a stretch that is too dark over areas with no cloud cover. In this instance, I suggest you work with the Brightness filters, making it brighter in the dark areas and accepting that your clouds might be over-white or even completely saturated and odd looking.

Until our next edition of G-FAQ, happy GIS-ing!

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here:

Brock Adam McCarty

Map Wizard

(720) 470-7988

Brock@apollomapping.com