The Dish near Palo Alto, California blasts us across the Atlantic Ocean for this edition of Small World. And we land in Albi, France, located in the Midi-Pyrenees region of France. It is the largest metropolitan region of France by area, larger than the Netherlands or Denmark. The region was named without regard to historical context, and solely on its geography. Midi means southern France, and Pyrenees refers to the mountain range on its southern border.

The first human settlement in Albi was during the Bronze Age, and remains that have been unearthed indicate that it was a Roman settlement at one time. There is speculation to how the town got its name. Some think it comes from the Celtic word, alb or alp, meaning high place; and other speculations trace its namesake to the Latin word, albus, for white, a reference to the limestone cliffs nearby. Around 51 B.C., the town was known as Civitas Albigensium and the territory was known as Albigeois.

Albi is home to some of the world’s most beautiful architecture, and one of the most famous structures is the Palais de la Berbie. It was built in several stages, starting in 1228 A.D. and culminating in 1306 A.D. The palace was built after the fall of the Trencavels; and the rise of Bishop Durand de Beaucaire during this period allowed for the construction of an elaborate structure that eventually achieved the look of a citadel. It included a congregational hall with a tower, an ecclesiastical tribunal and a prison in the first phase. The Bishop feared for his life because of popular uprisings so the walls that face the city are built up considerably more than the south-facing walls


 In the early 1200’s, construction began on the Palais de la Berbie, a former testament to the power of the Bishops of Albi. Upon the fall of the viscounts, the Bishops moved in and held court for centuries. Image captured October 21, 2012 by the 50-cm resolution satellite, WorldView-2. Image courtesy DigtialGlobe and PhotoEnhanced by Apollo Mapping.

Over the coming centuries, there was much work done to the inside and outside of the palace, all with different influences based on the styles of the time. Due to limited resources, the Palace had times where it was not developed. Albi also fell victim to the Hundred Year War and destruction from the famine and looting of the Great Black Death. By the 19th Century, the Empire of France had declared the Palais de la Berbie a national building. In 1905, the separation of Parisian church and state ended the palace’s original function as home to the clergy.


 This view from above is of the Cemetery Madeleine and Sainte-Cecile near Albi, France and the banks of the Tarn. Upon first glance it could be confused with a silicon chip, but in reality theses resting grounds long predate Windows and Apple. Image captured October 21, 2012 by the 50-cm resolution satellite, WorldView-2. Image courtesy DigtialGlobe and PhotoEnhanced by Apollo Mapping.

Another important work of architecture in Albi is the 150-meter “Old Bridge” (Pont Vieux) built in stone during 1035 A.D. and then covered in brick afterwards for additional support. Designated by the UNESCO World Heritage Center as an important international monument, it is located in the Saint-Salvi Quarter and is a testament to the high-level of economic and urban development of that era. The city of Albi’s architecture is a reminder of another time, and is evidence of advanced cultures from centuries ago. As a town of only 50,000 set in ‘old-world style,’ Albi is a fitting example for our Small World.

Justin Harmon

Staff Writer

Makkah, Saudi Arabia–October 26, 2012

The Hajj, meaning “pilgrimage,” occurred from October 24 to October 29, 2012. Once a year from the ninth through the 13th days of Dhu Al-Hijjah on the Muslim lunar calendar, the faithful show their solidarity and submission to Allah by converging at the Sacred Mosque in Makkah (Mecca). This is one of the largest pilgrimages in the world, and as the fifth pillar of Islam, a religious duty that must be carried out at least once in a lifetime by every Muslim who is capable of doing so. Pilgrims have gathered here every year for 14 centuries to perform rituals based on those conducted by the Prophet Muhammad when he last visited the city. Historically, the pilgrimage was a dangerous one, and many people died on their journey. Conditions improved under King Abdul Aziz Ibn Abdul Rahaman al-Saud, the founder of the modern Kingdom of Saudi Arabia, and major changes were made to ensure the safety and well-being of the pilgrims.

This 60-cm natural color image was collected over the Hajj on October 26, 2012 by QuickBird. At the center of the image you can see thousands of people encircling the Kaaba. (Story & Image Reprint Courtesy DigitalGlobe)

This image, taken at 10:35 a.m. local time, shows thousands of people who are circling counter clockwise around the Kaaba–the cube-shaped structure in the center of the Sacred Mosque, made of granite from the surrounding hills. The Kaaba, sometimes referred to as “The Noble Cube,” is the most sacred spot in Islam and dictates the Qibla, or prayer direction, of Muslims worldwide. Muslims believe the Kaaba is the oldest religious building in the world, and the sacred black stone is embedded in one of its corners. Pilgrims wear white clothing so no one can distinguish their national origin or socioeconomic status. It is estimated that between 3.16 and 3.65 million pilgrims made their way to Makkah this year, according to Prince Khalid al-Faisal, Governor of the Makkah region.

In this monthly feature, we span the globe to examine Our Changing Landscape with time series of medium resolution RapidEye satellite imagery. The RapidEye archive dates back to late 2008 and already contains more than 3 billion square kilometers of data. This month, we travel across the ‘Pond’ to Munich, Germany and the 2011 Oktoberfest.

The RapidEye Constellation

RapidEye is a constellation of five 5-meter medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers a daily revisit time to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a base price of $1.28 per square kilometer for all five spectral bands–academics receive a discount on this price. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data available in the red edge band allows users to extract more useful land ‘information’ than can be from traditional 4-band imagery sources. When RapidEye imagery is ordered as a Level 3A Orthorectified product, images from multiple dates are extremely well registered, making it the ideal data source for Our Changing Landscape.

Oktoberfest 2011

What started as the royal wedding of Crown Prince Ludwig to Princess Therese of Saxony-Hildburghausen on October 12, 1810, has since grown into the world’s largest festival. The tradition of Oktoberfest grew out of a horse race held at the royal wedding that was repeated in subsequent years given its popularity with the local Bavarians. Oktoberfest has been held nearly every year since 1810 with breaks during World War I, the Great Depression and World War II.

Today, the event spans 16-days from late September to the first weekend in October. While many outsiders know the festival for its ‘wurst,’ beer steins and lederhosen, the 6-million plus visitors to the Theresienwiese (or the field of Therese in Munich where the event is held) are welcomed by a carnival atmosphere that has something for the entire family. For the kids, there are games, rides and candy stands galore. And for the ‘kids at-heart,’ there are a plethora of large and small tents to visit. Each houses a local brewery that serves up specially-crafted beers and wines–fueling the group song and dance which lasts all night long.

The record Oktoberfest attendance was set in 2011 at 6.9-million visitors who consumed 2-million gallons of beer which is a bit over a liter per visitor. Record crowds and revenues were expected in 2012 where a single liter of beer cost 10 Euros (with the tip included) in most of the large tents. The animation that follows shows you the set-up, several days during and the tear-down of Oktoberfest 2011. Given how colorful the event is, my goal was to accentuate this as opposed to matching colors between the various dates.


Click on the image above to see an animation of 5-meter natural color imagery collected over Theresienwiese during and around Oktoberfest. In these images, you can also see the affects of sun elevation on RapidEye images as the shadows are much deeper in the late October data. Finally, you can see from the time stamps on each image that the set-up of Oktoberfest takes a good bit longer than the breakdown. (Images Courtesy: RapidEye)

If you would like to find out more about using RapidEye for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.

In this monthly article, we provide details on updates released each month to Astrium GEO’s 2.5-meter (m) SPOTMaps product. SPOTMaps is an orthorectified natural color imagery layer with coverage over more than 100 countries–totaling an impressive 84 million square kilometers (sq km). For projects requiring a value-priced basemap better than what 15-m Landsat can offer, there is no other choice than SPOTMaps.

SPOTMaps Updates–November 2012

  • 13 markets are being updated, including:
    • Parts of eastern and northern China
    • Parts of Australia
    • 3 countries in Africa
    • 2 countries in Europe

For those who have never worked with SPOTMaps, below is a summary of key product specifications as well as product differentiators.

Key Product Specifications

  • Resolution: 2.5-m
  • Spectral Bands: simulated natural color (RGB)
  • Horizontal Accuracy: 10 to 15-m RMSE (root mean square error)
  • Projection/Datum: UTM WGS84
  • Source Data: SPOT5 satellite imagery
  • File Format: GeoTIFF

Product Differentiators

  • Recent and ready for immediate delivery and integration with your GIS
  • Seamless, orthorectified coverage across countries and entire regions
  • Suitable for work up to 1:10,000 scale
  • Custom product framing with minimum orders of ~100 sq km
  • Prouct series is updated every month
  • Source data can be delivered with all SPOTMaps mosaics
  • Volume and academic discounts are offered
  • Multi-user license are available
  • In the coming months, new 1.5-meter SPOTMaps data made with natural color SPOT 6 and SPOT 7 imagery will be made available

The map below has been color coded to show the collection year which makes up the majority of each SPOTMaps mosaic as well as those markets that were updated this month. An Apollo Mapping representative can provide more details on the specific year ranges used in each mosaic.



If you would like pricing details and/or additional product details, such as date ranges and accuracy specifications, please let us know at sales@apollomapping.com or (303) 993-3863.

As approved resellers of DigitalGlobe, Apollo Mapping is proud to offer imagery products from the first-ever 30-centimeter (cm) natural color orthoimagery layer covering the lower 48 states of the United States of America as well as significant portions of Western Europe. Scheduled to be completed by mid-2012, this impressive dataset will cover more than 10 million square kilometers (sq km) with an additional 6 million sq km of updated imagery to be collected over the next 30 months. Microsoft and DigitalGlobe have partnered on this long-term project, utilizing an exclusive aerial sensor–the UltraCamG–to collect the most accurate and visually appealing imagery available on the market.

The data included in the Precision Aerial imagery program can be grouped into three categories according to its collection and production specifications:

    • High Value Areas (HVAs)
      • These are dense urban centers and tourist destinations
      • No clouds, cloud shadows, haze, smoke or pollution
      • A horizontal accuracy of 2.7-meters (m) Circular Error 90% (CE90%)
      • Leaf-off is required
      • Free from standing water with only permanent snow and ice
      • Data is processed and color balanced across the entire market
    • Standard Blocks
      • These are often suburban areas and smaller cities
      • No clouds, smoke or pollution; and less than 2% cloud shadows and haze
      • A horizontal accuracy of 4.0-m CE90%
      • Leaf-off is desired
      • Data is processed and color balanced by one-degree cells (~10,000 sq km)
  • Remote Blocks
    • These are rural areas
    • Minimal amounts of clouds, cloud shadows, haze, smoke, pollution, standing water, snow and ice
    • A horizontal accuracy of 5.3- m CE90%
    • Leaf-off is not available
    • Data is processed and color balanced by one-degree cells (~10,000 sq km)

The following specifications are universal across the Precision Aerial imagery dataset:

  • Both 30-cm natural color and 60-cm color infrared (CIR) products are available
  • Color balanced, seamless orthomosaics
  • A projection/datum of UTM WGS84

In this regular monthly piece, we will provide our readers with an update on the progress of DigitalGlobe’s Precision Aerial imagery program, current coverage maps and full resolution previews of the data. If you would like more details on the coverage available in your area and/or on the pricing of the various delivery options, an Apollo Mapping representative would be happy to assist and can be reached by phone at (303) 993-3863 or email at sales@apollomapping.com.

November 2012–Coverage Statistics & Maps

  • Collections over the USA have already been completed minus the several restricted air spaces shown in purple on the map below; and are near completion in Europe.
  • 11,100,000+ sq km of 30-cm natural color and 60-cm CIR data acquired
  • 11,000,000 sq km –loaded on DigitalGlobe’s cloud and streaming web services
  • Key Areas CompletedAcquisition
    • 10 Standard and remote blocks of coverage where obtained over Europe

In the coverage maps below of DigitalGlobe’s Precision Aerial imagery over the United States and Europe, we have indicated the outlines of the HVAs and blocks that are a part of this program. Each of these outlines is color coded to indicate the last year data was acquired in this area.

 

Continuing the topic started in the November Geospatial Frequently Asked Question (G-FAQ), in this month’s edition I conclude the conversation on geographic transformations, projections and more in ArcGIS. In this G-FAQ, I focus on the operational side of geographic transformations in ArcGIS versus the ‘theory’ we covered last month. Specifically, we will look at the three PDFs Esri delivers with ArcGIS about this topic, and offer advice on completing projections, re-projections and geographic transformations.

As a quick reminder, the November and December G-FAQ’s address this core set of questions:

What exactly is a geographic transformation? How do the various Projections and Transformations toolbox functions differ? What advice can you offer when working with shapefiles, rasters and geographic transformations?

ArcGIS Documents on Projections and Geographic Transformations

To start off the discussion this month, let’s have a look at three reference documents that are included with ArcGIS (at least with ArcGIS 10.x, and perhaps with ArcGIS 9.x as well). You can find them in your program files on the hard drive with your ArcGIS install. On my 64-bit laptop, they are located here:

C:Program Files (x86)ArcGISDesktop10.1Documentation

Depending on how you installed ArcGIS, they might be stored in a slightly different location. If you cannot find them, fear not as you can download the PDF’s below:

  • Geographic Coordinate Systems– this document provides a wealth of information on the geographic coordinate systems available in ArcGIS as well as the locations each can be used. It also contains information on the horizontal and vertical datums that are available.
  • Projected Coordinate Systems– this document contains information on the projected coordinate systems you can use in ArcGIS as well as the locations where they apply.
  • Geographic Transformations– this is an important document which shows you the various geographic transformations offered in ArcGIS. The most important item to take note of is the Accuracy column. This shows how accurate the geographic transformation is in millimeters–a value of 999 represents an unknown accuracy value. The other important columns are the geographic location that each transformation is valid over. I will refer to this document in more detail later in this G-FAQ.

Projections and Re-Projections in ArcGIS

Now let’s delve into ArcMap and look at the three projection and re-projection Toolbox functions. These three functions are located in the Toolbox under Data Management -> Projections and Transformations. The Define Projection function is used to set the projection of your data if, and only if, it is completely un-projected. Refer to last month’s G-FAQ for tips on determining if your data is projected or not before you use this tool. If your data is not projected, the functionality of this toolbox is straight forward as you will need to select the correct projected or geographic coordinate system and then the correct datum. In order to determine the correct projection, you will need to look at the metadata files that (hopefully) accompany your geospatial data.

If your data is already projected and you need to change this from one system to another, then you will need to use the Toolbox functions under sub-menu Feature -> Project for shapefiles and Raster -> Project Raster for rasters. There are few differences in the steps you take to re-projecting shapefiles and rasters. First, you will need to pick the coordinate system and datum you wish to re-project your geospatial data into. If you convert from a projected to geographic system (or vise versa) with the same datum, a geographic transformation is not required. In all other cases, you will need to apply a transformation–I will discuss this step in some detail in the following section. Also keep in mind that you will need to know the correct zone number if you plan to convert to a projected coordinate system.

As a quick side note, when re-projecting rasters, it is a common practice to include the latitude and longitude value of known locations, called ground control. This will improve the horizontal accuracy of the re-projected rasters. Unfortunately, ArcGIS does not allow you to apply photo-identified ground control in the Project Raster toolbox function.

Advice on Geographic Transformations in ArcGIS

Now comes the part of the lesson that all of you have so patiently waited for, choosing the correct geographic transformation! For those ArcGIS 10.x users, you will notice that the geographic transformation is more often than not auto-populated with a value. Arc picks this value based on the Accuracy column I mentioned above. It does this by cross-referencing the source and output datums with the data’s latitude-longitude ranges to pick the geographic transformation with the lowest Accuracy value (i.e. the most accurate transformation).

For those users of ArcGIS 9.x, you should refer to the PDF included with Arc 10.x as in past versions, this accuracy column was not automatically assessed. You will want to select the transformation that is valid in your specific location and converts between the correct source and output datums. This is a large list of transformations so be sure to look through the entire list before making your selection.

Here are the tips I can offer to help you avoid the pitfalls I have encountered with geographic transformations.

  1. While Arc 10.1 has almost always chosen a geographic transformation for me, there have been instances when this has not happened. As of yet, I cannot determine what causes this. Either way, the solution is simple: grab the third PDF above and find the correct transformation on your own.
  2. If you are re-projecting multiple geospatial datasets over the same area, be sure to use the same geographic transformation on all of the datasets to avoid any possible issues with the inherent inaccuracies of each.
  3. Perhaps the most important tip I can offer is the possibility that you are not using the correct transformation as you are converting between two older revisions of a common datum. See the November G-FAQ for more details on datum revisions. Unless you have detailed metadata about your geospatial datasets, there is a very good chance that you would never know this is occurring. One way you might notice an incorrect transformation is regular (and likely very minor) horizontal displacement across an entire dataset. So for instance, you notice a 3-meter shift to the north when you compare all ten known latitude and longitudes locations (sometimes called ground control points) to your data. If you see this, I suggest you experiment with several alternative geographic transformations to minimize the regular shift. In some cases, this will solve your issue, and in other cases it will not.

 

 

A short video showing you some of the pitfalls I have encountered with geographic transformations in ArcGIS 10.1.

Until our next edition of G-FAQ, happy GIS-ing!

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here:

Brock Adam McCarty

Map Wizard

(720) 470-7988

Brock@apollomapping.com

In this monthly series, I turn my attention to one of the most powerful software packages for raster processing available–the Geospatial Data Abstraction Library (GDAL)–and as an added bonus, it’s free! Each month, I focus on a different utility offered in GDAL, walking the reader through its applications and offering up a series of tips and illustrations so that you can emulate this process in your office and/or home. In this edition of WIG, I show our readers how to use GDAL to create a topographic roughness map from a raster digital elevation model (DEM).

About GDAL

GDAL is an open source software application that was launched in 1998 and has been updated multiple times since. While the current version of GDAL (i.e. version 1.9) can be downloaded from multiple locations, I find this site to be the most up-to-date and easy to navigate. I suggest downloading the stable version of the MSVC2010 build for either 32-bit or 64-bit PCs depending on which you have access to. You can also download GDAL as part of an easier to install program, FW Tools, but the version of GDAL included with this installer is usually not the most recent.

GDAL contains a wide array of utilities to help you process raster files. I find that GDAL is more stable and runs quicker than ArcGIS, ENVI and PCI for data production–although the toolkit is more limited than in these applications. GDAL does not rate high for user-friendly functionality as it is command line driven (i.e. words and text, not graphics and mouse clicks); and this is the inspiration for creating the WIG series.

What is a Topographic Roughness Map?

A topographic roughness map is another function included in the GDAL DEM package that tries to assess how flat or steep a surface is in a numerical-fashion. Roughness is computed by subtracting the minimum elevation from the maximum elevation value in a defined-neighborhood around a central pixel. In GDAL, the neighborhood is fixed as the 8 nearest cells to a central pixel–which is an unfortunate lapse in the program. Roughness then is equal to the maximum elevation displacement in a three by three grid of DEM cells around a central point.

Given how roughness is calculated, it is always greater than or equal to zero. Values of zero or those close to zero indicate flat areas. While larger roughness values indicate increasingly steep terrain. Also note that similar to other measures of steepness, roughness is a scale-dependent index. First, you can vary the scale of the calculation itself by decreasing/increasing the size of the neighborhood (outside of GDAL of course) so that as you decrease the size of the neighborhood, finer and finer variations in the landscape are revealed. Second, the resolution of the DEM itself will impact roughness. For example, imagine a valley bottom in a 10-meter DEM and in a 1-meter DEM. In the 10-meter DEM, the valley bottom appears nearly flat; while in the 1-meter DEM, the valley is as an undulating surface with lots of local variability in elevation.

Creating a Topographic Roughness Map

In order to create a roughness map from a DEM, I employed the GDALDEM functions–you can find out more about them here. Here are the steps I took to create this layer:

  1. I moved my DEM file, a digital terrain model (DTM) produced by DigitalGlobe with 2-meter resolution over Gadara, India, to a folder called, ‘Test,’ located the root of my C: Drive
    1. This is the same data used in last month’s edition of WIG
    2. I chose a simple folder name and file location (i.e. C:test) for the data to make things easier when working with the command line interface of GDAL
  2. I also changed the name of the DTM file to ‘DTM.tif’ to make things easier when working with GDAL
  3. After starting up GDAL, I used the command: cdtest
    1. This command points GDAL to the folder I created with the DTM
  4. If you would like to get a list of the files in the folder you are working in, use this command: dir
  5. To calculate TPI, I used the following command: gdaldem roughness DTM.tif roughness.tif
    1. In this command, the words ‘gdaldem TPI’ define the utility that GDAL uses to process the data
    2. ‘DTM.tif’ is the full name of the input (original) DEM file
    3. ‘roughness.tif’ is the name I chose for the output topographic position map as a TIFF file; you can change the file extension ending to any in this list if you would prefer an alternate raster format
  6. 6. There are several universal GDAL GDEM functionality commands that can be added to a roughness calculation though none of them are specific to this command

Working With Roughness Maps in ArcGIS

In this, our final function of the GDAL GDEM series, it should be no surprise to regular readers that interpreting a roughness map in ArcGIS is not as upfront as one would like. The key challenge is to exclude the erroneous roughness values created at the edges of the map where no data exists; and then to create a colored symbology that is easy to interpret.

In each of the previous editions of WIG, I have included a thorough discussion of determining the maximum and minimum range for GDAL created datasets, so I will not reiterate the process here (see our October WIG edition for a complete handling of the steps). One reminder I will offer is that you may need to increase the number of pixels ArcGIS will compute values for in order to determine your max and min, this can be done under ArcMap Options->Raster Options.

After working through the steps to determine the maximum and minimum roughness values in my DEM, I found that the maximum value is 5.742 with a minimum of 0–which is also be found in the no-data band at the edges. I created two colored versions of the roughness map–one with a continuous color scheme and one with color classes. To create the continuous color ramp, right-click on the roughness map and select Properties->Symbology. Select the Stretched option from the left-hand column and set the ‘Statistics’ to “From Current Display Extent” (this is located towards the bottom of the popup screen). I chose a continuous color ramp where yellow was the flattest and red the roughest areas. By setting the statistics to the current display extent, you can zoom around the roughness map and the colors will automatically scale to the roughness values you can currently see. This creates some very useful maps to identify small topographic features such as ridges and paths.

I created another colored roughness map using the Classified option under the Symbology tab. In order to do this, I first set the Exclusions under the Classify.. button to ‘5.742–33000’. Then I experimented with different classification schemes, settling on Standard Deviations with 5 classes. I chose Standard Deviations as this shows the data in increasingly rough classes according to their distance (so to speak) from the mean value of the roughness layer. I chose a Green-Yellow-Red color ramp to display the five classes with green being the flattest and red the roughest areas. In the animation below, you will see how this classified roughness map reveals more macro topographic features as opposed to the fine features the stretched map revealed.



Click the image above to see an animation of the two roughness maps created here as well as a comparison of these maps to high resolution natural color imagery. In this animation, you will see how each of the colored roughness maps reveal features of different scales. The imagery shows that forests are often located in rougher areas while humans inhabit those that are flatter. (DTM Source: DigitalGlobe)

Brock Adam McCarty

Map Wizard

(720) 470-7988

Brock@apollomapping.com

While the Curiosity rover has already reached its final destination of Mars, it is still making out of this world discoveries. Most recently Curiosity put SAM to the test for the first time. SAM is not a relative of Marvin the Martian, luckily for Bugs Bunny, it is the Sample Analysis at Mars instrument suite. It takes pride of place on Curiosity, making up more than half the science payload. Its primary purpose is to search for carbon compounds which are the building blocks of life. Along with Curiosity, it will assess the planet’s atmosphere and soil chemistry in the Gale Crater.

SAM is capable of analyzing rock, mineral and atmospheric samples. Curiosity’s robotic arm moves the solid samples from the Martian surface into small cups in the Sample Manipulation System (SMS), while atmospheric inlets collect the atmospheric samples for testing. The samples must be heated and vaporized for analysis. This process is performed not by one instrument, but by three.



The Sample Analysis at Mars (SAM) instrument suite without its side panels at NASA Goddard. (Photo Credit: NASA)

SAM’s suite of instruments includes a gas chromatograph, mass spectrometer and tunable laser spectrometer. Compounds and elements are separated by the mass spectrometer, and then they are measured and identified. The gas chromatograph heats up rock and soil samples in order to vaporize the substance and separate the gases for analysis. The laser spectrometer measures isotopes such as oxygen, hydrogen and carbon in atmospheric gases.

SAM is meant to search for organic molecules on Mars; and these organic materials are essential for life–as far as we understand it. While they can exist without producing life, life cannot exist without them. SAM will measure the concentration of organic molecules on the Martian planet with greater accuracy then any instruments before it. So it should follow that many amazing discoveries will be made by Curiosity and the SAM instrument. The absence or presence of organic material will completely change how we view our neighboring planet. If SAM does not find any organic molecules in its ongoing mission, this does not mean that they do not exist, these materials could very well be deeper in the planet.

Click the image above to check out a MSL/NASA video describing SAM and how it analyzes the atmosphere on Mars. (Video Credit: MSL/NASA)

If organic molecules are found by SAM, it would open up whole new avenues of discovery and science while increasing our understanding of Mars. It would also lead to more questions: What are the isotope ratios? Where is it present? What kind of organic molecules? How abundant are they? And where else are they located? These are only a few of the obvious questions that would spur more exploration of the Martian planet and enhance our understanding of the Universe.