• After focusing on a set of hard to classify renewable energy technologies in the last News Snippets, this month I turn my attention to advances in wind power. Sandia National Laboratories is exploring vertical-axis wind turbines for offshore energy production. A vertical-axis turbine is one where the blades spin around a central, upright tower as opposed to the ‘pinwheel’ turbines most of have seen before. A vertical-axis turbine could reduce the cost of offshore wind as they are more stable, have fewer parts and can be made larger. A Cambridge University engineer is taking a different approach to improving the efficiency of offshore wind production by reducing the energy expended to install and stabilize the turbines. Currently, offshore turbines are installed using large amounts of steel and cement to lock them to the ocean floor–this infrastructure is costly to install and maintain. The Cambridge engineer envisions a system of turbines anchored to the bottom of the ocean with steel cables–this free floating concept could nearly double the efficiency of offshore wind turbines.Kites maybe a low cost and reliable way to harvest wind power in many environments as they can fly much higher where winds are stronger and more reliable. Further, the infrastructure required for a kite farm is much less than is needed for traditional farms of wind turbines. A startup called Kite Gen has developed a system where a tethered kite climbs into the sky, turns an alternator as it does and thereby generates a current. A team of German researchers at NTS GmbH have taken a different approach whereby they attach kites to vehicles secured on energy generating rails. As the kites are tugged by the wind, they pull these vehicles around the rails which covert kinetic energy to electricity.One criticism of wind turbines with large metal blades has been the damage they can cause to bird populations. Inventor Raymond Green has developed a turbine with no exposed blades which promises to harness wind power without harming birds. The turbine uses a cone to funnel wind over blades that are completely housed inside an inaccessible metal compartment. And finally, GE has partnered with academic and government researchers to develop lightweight, strong fabrics which could replace the heavier material used currently for wind turbine blades.
Sarasota County Green Map© users can toggle on and off more than twenty layers.
    • Why doesn’t every community have a green map like this one? Kudos to the Sarasota County (FL) GIS team for creating a valuable resource such as this that is both informative and easy to use. The labels are bold and nicely colored while the buttons at the top of the screen reveal a set of interesting ‘environment-related’ locations. With the online map, users can find local community gardens, trails and even green marinas.
    • Given that it’s February, I could not resist Googling, “GIS and Valentine’s Day,” on a slow Friday afternoon and was pleasantly surprised to run across a small collection of GIS jokes on the Dickinson College website. So when you have a slow Friday at work, check out this website and hopefully you will come away with a smile on your face!
    • From the chilly city of Anchorage which we featured last month, we head south to Arizona’s largest city, Phoenix, and explore their online GIS resources. Phoenix’s readily-accessible GIS data is (unfortunately for the advanced user) only available through an interactive web map. The map is a bit old-fashion feeling but it gives you access to a wide array of layers including schools, points of interest, parcels and even alleys. For those looking for shapefiles to use in ArcGIS or aerial imagery as TIFFs, you will have to order that data here.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

Have you ever wondered what the world would look like if the human eye could see other parts of the electromagnetic spectrum? Would images in the near-infrared spectra appear red to our eyes? If you have asked yourself these questions, then welcome to nerdville, and be reassured, you are not alone. A few people, with more imagination then I possess, have made my dream a reality. With the use of infrared (IR) film or filters the natural landscape takes on a surreal appearance.

These days, many digital cameras are sensitive to infrared wavelengths; so you can place a filter on the camera that blocks the visible wavelengths so it captures an image with just infrared light. David Keochkerian uses an infrared filter as part of the process to create his luminous landscapes. Like something out of a dream, trees become sticks of cotton candy or spun gold. Surreal in their appearance and achingly common in their subject matter, Keochkerian’s images would be a serene landscape in other circumstances. The French artist has many images on his Facebook page here or on his website.

Another artist who uses infrared photography in their work is Richard Mosse. Instead of transporting the viewer to another planet, he takes you half way around the world to a place that seems just as foreign but is more terrifyingly real then many want to believe. In 2010 and 2011, Mosse went to the Democratic Republic of the Congo to capture the conflict. The techniques used by the two artist are very different. Instead of using a digital camera with a filter, Mosse uses a now discontinued color infrared film. Kodak Aerochrome III infrared film was intended to be used in aerial photography for forestry, vegetation and camouflage detection.

Capturing the conflict with the infrared film transforms what would be lush, green forests and embattled army fatigues into varying shades of pink which are reminiscent of a Malibu Barbie. In a place that has gone mostly forgotten by the international community and whose ongoing conflict is marked with brutal physical and sexual violence, these photographs attempt to draw much needed attention to these issues through the juxtaposition of violence with bubble gum backgrounds. More of his work can be found on his website.

Have you had a chance to test out our online imagery search engine, Image Hunter?

If not, give it a test drive now as all orders placed with Image Hunter will receive a 5% discount!

We are very excited to announce that this month we added the medium resolution satellites SPOT 4 and SPOT 5 to the Image Hunter database; as well as the high resolution satellites, Pléiades 1A and 1B. With the addition of the Pléiades 1 constellation, you can now preview and order data from ever sub-meter multispectral satellite that is commercially available. We are excited about this change as it will save our Apollo Mapping clients significant time searching for and ordering both high and medium resolution satellite imagery.

Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high resolution satellite imagery on the market today, including:

  • WorldView-2
  • QuickBird
  • WorldView-1
  • GeoEye-1
  • IKONOS
  • The Pléiades 1 constellation
  • SPOT 4 and 5

If any of our readers have struggled with other geospatial search engines that are clunky; only query one data source; and/or do not provide preview images, then Image Hunter is the solution to your woes, as it features:

  • Near-instantaneous loading of low resolution preview imagery with associated collection date and key metadata.
  • The ability to define your area of interest by address and with coordinates, geometric shape or shapefile/KMZ.
  • A responsive base layer with street names and imagery to provide a spatial context when discovering data.
  • Online ordering of satellite imagery from 3 data providers and 7 constellations.
  • Global coverage with tools to measure distance and create annotated maps.

Image Hunter can be accessed here. If you would like help with Image Hunter, you can view a Startup Tool Guide here. We are excited to find out what you think about Image Hunter and any ideas you might have to improve the user experience–we can be reached anytime at (303) 993-3863 or at sales@apollomapping.com with these suggestions.

It’s not often you find a freeware application that has a suite of capabilities that rivals those found in the paid remote sensing packages–and when I run across one, it will certainly be the focus of my Free For All. Designed by the French Space Agency (CNES), the ORFEO Toolbox (OTB) is a command line driven, open source library with a vast array of remote sensing algorithms and tool for processing optical, hyperspectral and radar data. For most users, OTB will be challenging to work with (including me!). Recognizing this, a lightweight and slightly more user-friendly interface was designed, Monteverdi. You can download the freeware application, Monteverdi, here.

A screengrab of the Monteverdi user interface–it is not the most user-friendly application, but it is powerful.

While Monteverdi does not score highly for its user-friendly interface, it is an extremely robust remote sensing package with options from color balancing to image segmentation. Some minimal directions can be gleaned from the online OTB Cook Book found here. In this month’s G-FAQ, I will show our readers how to use Monteverdi to color balance satellite imagery.

The key features of Monteverdi include:

  • Image and band mosaicking
  • Change detection
  • Band math
  • Radiometric calibration (and for the most popular high resolution satellites, this process is rather automated)
  • Calculation of image statistics including the maximum and minimum pixel values
  • Viewing of and export to multiple raster imagery formats

Until my next edition of Free For All, happy hunting for free geospatial goodies!

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

Data storage is not free as we all know, and many geospatial files are really large, especially high resolution aerial and satellite imagery. In fact, the minimum size order of 50-cm color WorldView-2 satellite imagery with 16-bit depth has a file size over 500 megabytes (mb)! So then, what is a viable solution for long-term storage?

I am guessing that many of you use the same solution as I do–file compression. If that is the case, you need to give 7-Zip a look. It is a freeware program that does a superb job at compression with a lot of great options to boot. 7-Zip is particularly powerful as it creates .7z files which is claimed to be the file type with the highest compression ratios possible. Even if the claim is not true, .7z format does at least create more compressed files than you will find in ZIP format–perhaps the most common compressed file format. In fact, in our G-FAQ this month, I test the claims made about .7z format on a high resolution TIFF imagery file.



A screengrab of the 7-Zip user interface.

Here is a list of my favorite options that are offered in 7-Zip:

  • Open more than 20 compressed file formats and compress into more than 5 formats, including .7z, .zip and .tar
  • Ability to create password-protected compressed files
  • Support for compressed files split into multiple, smaller volumes
  • Compressed files can be updated with new, uncompressed files
  • Right-click menu support for key compression options in a Windows environment
  • Dual core support to increase compression speeds

You can download the latest and beta versions of 7-Zip here.

Until my next edition of Free For All, happy hunting for free GIS data!

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

Researchers from the University of Sussex in the UK and Rhodes University in South Africa conducted a study utilizing GIS to assess the socioeconomic conditions of the mountainous regions in the southern portion of the African continent–specifically Lesotho, South Africa and Swaziland. Their idea arose from talks about sustainability practices in metropolitan and rural areas which lacked any consideration to the specific needs of mountainous zones. Due to their sparse population and relatively small total acreage compared to other land classifications (e.g. prairie, wetland, etc.), the mountainous regions were dubbed ‘invisible.’ In an earlier study, the Mountain Catchment Areas Act 63 found that nearly 25% of South Africa could be labeled as mountainous with 15% of this total defined as ‘hill country’ by international standards. That makes a full 10% of the country ‘mountainous,’ and therefore certainly worthy of giving it specific attention.

This study looks at three ways of designating landscapes as mountainous using a combination of topography, vegetation and culture. For the topographic definition, the researchers used the digital topographic database, GTOPO30, to devise a categorization of ‘mountainous.’ Elevation, slope gradient and elevation range are all adjustable variables which will change what is deemed mountainous. The researchers decided to use the most stringent topographic definition so that approximately 10% of Southern Africa was classified as mountainous.


The dark black areas on the map indicate regions dubbed as mountainous with a minimum elevation of 850 meters, a range of at least 300 meters and a slope gradient of at least 5%.

The second method of consideration, vegetation, used data from ENPAT to assign biome classifications based on known common species and structures. To do this, the researchers identified vegetation and growth patterns that matched those commonly found in mountainous regions. This classification resulted in an increase in what should be considered mountainous for Southern Africa to nearly 14%.

The third method was based on cultural characteristics as a proxy variable for topography. Considerations for this approach were based on name classifications in a gazetteer for South Africa only. The keywords of focus were: mountain, mountain range and highlands. Of the 629 names that involved one of the chosen handles, 500 referred to mountains, and 49 to mountain ranges. All of the named areas were at least 850 meters at their lowest points.

Attempts were then made to assess poverty in mountainous areas using a commonly accepted definition of poverty. Mountain people had less access to flush toilets and electricity than did metropolitan and rural, non-mountain people, but had higher access to public taps than either other category. Mountain people also had a lower average household income.

Mountains play a major role in biodiversity and water diversion. If people that live in mountainous regions are unable to access modern resources, they will be more reliant upon nature, and we risk potential overuse or abuse of our limited natural resources. However, any policy changes that could affect mountain people can create even greater socio-cultural problems if their specific needs are not addressed, hence it is an area of research that needs further consideration.

Justin Harmon

Staff Writer

Through Earth as Art, NASA makes fascinating and beautiful images of our home planet freely available and easily accessible to the public. This compilation of Earth-centric imagery pulls from a full range of NASA satellites and their many band combinations to create imagery worthy of any museum. To celebrate the many years of discovery and observation, the ‘best’ Earth as Art images have been compiled into a publication. Each image is accompanied by a brief description of the natural phenomenon captured, the imaging satellite and some interesting facts about the local geography.


Salt lakes and sand dunes inhabit the Turpan Depression at the foot of the Bogda Mountains in China.
What appears to ba an impact crater in Mauritania is actually a volcanic dome that hardened and eroded over time, revealing varying layers of rock.

The publication is available as a PDF download or as an iPad app.

You can access the PDF file here.

The iPad application can be downloaded here.

In this monthly article, we provide details on updates released each month to Astrium GEO’s 2.5-meter (m) SPOTMaps product. SPOTMaps is an orthorectified natural color imagery layer with coverage over more than 100 countries–totaling an impressive 101 million square kilometers (sq km). For projects requiring a value-priced basemap better than what 15-m Landsat can offer, there is no other choice than SPOTMaps.


A 2.5-meter SPOTMaps simulated natural color image collected over Paris, France. © CNES 2012, Distribution Astrium Services / Spot Image S.A., France, all rights reserved

SPOTMaps Updates–December 2012

No new updates since our last newsletter.

For those who have never worked with SPOTMaps, below is a summary of key product specifications as well as product differentiators.

Key Product Specifications

  • Resolution: 2.5-m
  • Spectral Bands: simulated natural color (RGB)
  • Horizontal Accuracy: 10 to 15-m RMSE (root mean square error)
  • Projection/Datum: UTM WGS84
  • Source Data: SPOT5 satellite imagery
  • File Format: GeoTIFF

Product Differentiators

  • Recent and ready for immediate delivery and integration with your GIS
  • Seamless, orthorectified coverage across countries and entire regions
  • Suitable for work up to 1:10,000 scale
  • Custom product framing with minimum orders of ~100 sq km
  • Product series is updated every month
  • Source data can be delivered with all SPOTMaps mosaics
  • Volume and academic discounts are offered
  • Multi-user licenses are available
  • In the coming months, new 1.5-meter SPOTMaps data made with natural color SPOT 6 and SPOT 7 imagery will be made available

The map below has been color coded to show the collection year which makes up the majority of each SPOTMaps mosaic as well as those markets that were updated this month. An Apollo Mapping representative can provide more details on the specific year ranges used in each mosaic.

If you would like pricing details and/or additional product details, such as date ranges and accuracy specifications, please let us know at sales@apollomapping.com or (303) 993-3863.