In a study by a researcher at the University of Tennessee, Rachel J.C. Chen used GIS to identify sites that could be developed for the tourism industry. Relying on past GIS research that established areas best suited for real estate investment and development, the author looked at how to best implement tourism planning strategies utilizing a GIS analysis.

The graphic above shows four cities in Monroe County and their proximity to common travel routes. Access to GSMNP requires travel on non-major thoroughfares for residents of these cities. The hope is that with GIS technology, more efficient travel routes can be built by the state and used by residents.

Chen looked at three aspects of tourism development with GIS: visitor flow management; facility inventory and resource use; and site assessment. Visitor flow management identifies principal tourist activity destinations. Facility inventory and resource use is intended to address environmental justice–specifically that tourism may not benefit all segments of a locale equally. Finally, site assessment uses GIS to calculate the potential environmental and cultural impacts from heavy-use areas.
The research also explores the benefits of using GIS in the classroom as it allows students to build a skill set for a potential future career. In the project that accompanied this research, graduate students looked at tourism-retail decision making, attraction allocation and spatial factors to demonstrate the value of using GIS in tourism planning decisions in and around the Great Smoky Mountains National Park (GSMNP). Besides helping visitors find their way around and to destinations more easily, GIS was also thought to be a worthwhile tool for generating business in the park area.

The class project and Chen’s research focused on Monroe County, Tennessee, an area comprised of more than 660 square miles, a third of which resides in the Cherokee National Forest. Located in this zone were four highly visited tourist destinations: the Cherohala Skyway, the Lost Sea, Fort Loudon State Park and the Sequoyah birthplace museum. Because Monroe County is easily accessible by air, water and land, it’s an excellent case study to consider the impacts of tourism as well as the strengths of GIS in identifying potential service problems and minimize visitor impact.

For future research, Chen will focus on the role of GIS in planning tourism development. Specifically, she hopes to identify tools to improve travel routes, the allocation of specific services and the evaluation of site accessibility.

Justin Harmon
Staff Writer

Taking a stroll on the Bright Angel Trail using Grand Canyon Street View. (Credit: Google Maps)

Google Maps goes off road in their most recent venture to map the Grand Canyon. Their team suited up with backpack mounted cameras and went a-hiking the Canyon. The apparatus strapped to their backs is called the Street View Trekker or just Trekker for short. Trekker is said to be great for hard to reach places and is easy to maneuver, imagine R2D2 in a backpack. Google imaged the main Grand Canyon trails on the south rim with the help of 10 Google employees and 5 trekkers. The trails were covered over a 3 day period include the Bright Angel Trail, South Kaibab, South Rim and they picked up the Meteor Crater just outside of the National Park. The imagery in the walkthroughs is beautiful, having never hiked the Canyon myself it’s amazing to be able to experience this national treasure to some degree. You can access the Grand Canyon Street View and all of its trails here.

  • There are always major technological advances to report in solar energy, so this month I turn the spotlight back on this industry. First, let’s look at a series of ideas designed to increase the solar absorption rates of solar panels. One way to increase the amount of energy you capture from the sun is to increase the amount of the solar spectrum absorbed. Silicon-based panels, the vast majority of the panels in use today, only harvest energy from photons in the visible spectrum. 40% of the sunlight’s energy reaching our planet is in the near-infrared (NIR) spectrum and a team at the Massachusetts Institute of Technology has developed an early model of an all-carbon solar cell that can absorb these photons. While the conversion efficiency of the early model is far less than 1%, it is a major advancement in all-carbon solar panels as this version appears to be stable in air. Another MIT researcher has taken a different approach to capturing energy from more of the Sun’s spectrum whereby a thin-film material made of molybdenum disulfide is put under strain by a microscopic needle to create a funnel structure. The strain on the thin sheet changes its molecular structure so that atoms in the funnel are now able to capture energy from different portions of the solar spectrum, not just the visible. Researchers at Northwestern University increase the absorption of sunlight by increasing the amount of time photons stay inside a solar panel. Their idea uses a 100-nanometer thick organic layer designed with the ideal geometry to keep reflected photons in the cells below (which harvest energy) longer. Organic materials are attractive as they may be able to be produced for far less than mineral-based solar panels.There have also been interesting advances in the ways we use and capture solar energy. For instance, researchers at University of California, San Diego have developed solar panels with vertical, branching nanowires made of abundant natural minerals. The branched structure of these panels let them capture solar energy more efficiently as well as create hydrogen gas on their increased surface area where they split water cells. A scientist at the University of Delaware has taken a different approach to creating hydrogen fuel from sunlight which uses highly concentrated sun to heat up a reactor containing water with zinc oxide sprinkled in it. In this system, the zinc oxide can even be reused after the reaction takes place to form hydrogen gas. Rice University researchers have designed a system that creates steam by concentrating sunlight on containers of water with nanoparticles that capture photons, create heat and vaporize the water. This system could be used to create energy or even to purify water. And finally, there are new locations to harvest the sun’s energy with the advent of floating solar farms in Japan and transparent solar panels for windows.
My favorite bizarre map was created by Mia Bennett from UCLA and it shows some interesting statistics on the origins of sushi.
  • Do you like bizarre maps? Well I certainly do! And if you share my love of maps, you need to check out this website. In 2010, San Diego State University (SDSU) sponsored a bizarre maps contest where they selected a first, second and third place map as well as a number of finalists and honorable mentions. Each of the place winners and finalists received cash awards for their awesome maps. Unfortunately, SDSU has not found funding for the past two years to put on another bizarre map contest which is a shame!
  • In my continued obsession with complete worthless Google searches involving the word GIS, this month let’s combine it with ‘beer’ and see what we find! Dig into the results and you might uncover this gem of a poster by Ben Barham at the University of Missouri. It is full of fun facts about US beer consumption and production, for instance that Colorado produces far more beer than it consumes, that California has the most breweries and that North Dakota and New Hampshire consume the most beer per capita. Yum, beer!
  • From our southwest tour of Phoenix’s online GIS resources, this month we travel to the south and check out what Little Rock, Arkansas, the largest city in the state, has to offer. The Little Rock GIS website can be accessed here. It is a bit clunky and out-dated but works none the less. Most of the links, for instance city parks, census tracts and zip codes, on the main GIS page will take you to a dynamic mapping application with your standard suite of zoom, pan and query tools. If you click on the address layer, then the Information tool and finally over a location address, you can query some basic zoning information. The only downloads I could find were scanned tax maps with little identifying information on them. Overall, this Little Rock website has offered the least amount of functionality in our review of city GIS sites thus far.

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

After three years in orbit, NASA released a stunning video of SDO’s images.

I know it’s a bad idea, staring straight into the sun is terribly bad for your eyes. Thanks to NASA we have someone, or something, to do it for us and spare our eyes the trouble. The intent of NASA’s Living with a Star (LWS) Program is to understand the impacts of solar variability on Earth. It’s first mission is the Solar Dynamics Observatory (SDO), launched on February 11, 2010. Its goal is to understand solar variations that impact life on Earth and our technological systems. Eventually, NASA hopes to improve the prediction of solar variations by determining the structure of the Sun’s magnetic field and how it is generated.

Changes in solar irradiance can have a significant effect on Earth’s climate. Solar activity also has a decided impact on many of our instruments as solar flares and coronal mass ejections disrupt GPS communications, disable satellites and cause power grid failures. I don’t have to tell you that the Sun is extremely important to life on Earth and that ultraviolet radiation has a huge impact on its upper atmosphere. SDO’s Extreme Ultraviolet Variability Experiment (EVE) instrument measures fluctuations in the Sun’s extreme ultraviolet output.

A five-hour long coronal mass ejection and double flare from the Sun. (Credit: NASA)

Understanding the Sun’s physics is another priority of SDO. The Helioseismic and Magnetic Imager (HMI) maps the surface’s magnetic fields and is able to see below it. Data from the HMI is used to determine the interior mechanisms and sources of solar variability. In turn, this information leads to a better understanding of how surface activity and magnetic fields are affected by the Sun’s interior physical processes.

The Atmospheric Imaging Assembly (AIA) images the Sun’s atmosphere and surface in 10 different wavelengths. Four of the bands have never been used to monitor the solar corona and will open up new avenues of research and discovery. The AIA data of the coronal surface will be linked with changes in the Sun’s interior.

I’m sure you’re thinking, like I am, ‘Holy cow, that’s a LOT of data collection!’ We would be correct in this exclamation as SDO is constantly collecting data at a speed of one image every 0.75 seconds. Two radio antennas in Las Cruces, New Mexico are dedicated to collecting data from the satellite. Due to its geosynchronous orbit, the satellite is in constant view of the antennas so no data is lost. New data of the Sun streams to NASA every second and is made available for new discoveries and insights into Earth’s closest star.

Pléiades 1A has been in orbit since December 2011 and if you have not had a chance to check out any sample imagery, take a few moments and have a look at the gallery on our website. If you work with high resolution imagery, you should consider Pléiades 1A for your next geospatial project.

A variety of Pléiades 1A products are available from both a growing archive and as a new collection, including 50-centimeter (cm) pansharpened imagery and 50-cm panchromatic–2-meter (m) 4-band multispectral bundles. We are happy to discuss the technical specifications, pricing and tasking options available with this new satellite constellation as Pléiades 1A has been joined in space by its twin, Pléiades 1B.



© CNES 2012, Distribution Astrium Services / Spot Image S.A., France, all rights reserved.

Working with Pléiades 1A for the past months, we have noticed that:

  • The imagery archive is growing and is well targeted.
  • Astrium is able to deliver on their tasking feasibilities.
  • The data is crisp with excellent color saturation so that it is on par with competitors’ 50-cm satellites.

Recent Tasking Successes with Pléiades 1A

Month after month, Pléiades 1A continues to impress with its tasking prowess. In February, we had two successes:

  • Pléiades 1A  collected cloud-free imagery over a coastal polygon in Indonesia in less than 28 days, this is particularly impressive as it is the rainy season in the region.
  • And over the Indian Ocean, Pléiades 1A collected more than 750 sq km of less than 5% cloud cover imagery in less than 21 days. Open bodies of water are challenging to collect data over as cloud patterns tend to more erratic.

Pléiades 1A is definitely a giant of high-res tasking!

Pléiades 1A Sample Imagery

This month we feature stunning sample imagery collected by Pléiades 1A over Damascus, Syria on March 8, 2012. We enhanced this 50-cm natural color imagery to improve its colors and sharpness and the results speak for themselves.

Our Contact Details For More Information About Pléiades 1A/1B

The Apollo Mapping sales team can answer any questions you might have about Pléiades 1A. We can be reached anytime at (303) 993-3863 or sales@apollomapping.com.

More sample images and technical information about Pléiades 1A/1B can be found on our website here.

A Note From Apollo Mapping

–The article below is the first official press release about this exciting merger. As mentioned in previous editions of our newsletter (you can read more here), we think the combination of DigitalGlobe and GeoEye is a good thing for all users of satellite imagery. Now that this government hurdle has been cleared, DigitalGlobe and GeoEye can proceed with their combination to form one of the most influential companies in our industry.

January 9, 2013–DigitalGlobe, Inc. (NYSE: DGI), a leading global provider of high-resolution earth imagery solutions, today announced that it has received antitrust clearance from the U.S. Department of Justice in connection with DigitalGlobe’s pending combination with GeoEye, Inc. (NASDAQ: GEOY).

As previously announced, on July 23, 2012, the boards of directors of both DigitalGlobe and GeoEye unanimously approved a definitive merger agreement under which the companies will combine. Completion of the transaction is subject to satisfaction of other customary closing conditions, including obtaining regulatory approval from the Federal Communications Commission (FCC) and the National Oceanic and Atmospheric Administration (NOAA). DigitalGlobe is working cooperatively with the FCC and NOAA, and the transaction is expected to close by January 31, 2013. Shareowners of both DigitalGlobe and GeoEye have previously voted overwhelmingly in favor of the combination. Simultaneous with the closing of the transaction, the Company expects to complete a $1.2 billion refinancing, which is expected to include a combination of senior notes and senior secured credit facilities.