In this monthly feature, we span the globe to examine Our Changing Landscape with time series of medium resolution RapidEye satellite imagery. The RapidEye archive dates back to late 2008 and already contains more than 4 billion square kilometers of data. This month, we look at changes in the sand dunes of Erg Chebbi, Morocco.


Click on the image above to see an animation of 5-meter natural color imagery collected over Erg Chebbi,  Morocco on August 6, 2009, July 30, 2010, October 9, 2011, May 6, 2012 and February 14, 2013. In this animated series, you can see how changes in sunlight conditions cause dramatically different shadows and color. In fact, it makes it difficult to determine if the dunes have moved at all over this time. (Images Courtesy: RapidEye)

The RapidEye Constellation

RapidEye is a constellation of five 5-meter medium resolution satellites each offering five spectral bands of information. The RapidEye constellation offers a daily revisit time to every location on the planet with a huge footprint that is 77-km wide. The data is priced competitively with a base price of $1.28 per square kilometer for all five spectral bands–academics do receive discounts. RapidEye adds a fifth band, the red edge, to the ‘traditional’ multispectral set of blue, green, red and near-infrared (NIR). The additional spectral data available in the red edge band allows users to extract more useful land ‘information’ than can be from traditional 4-band imagery sources. When RapidEye imagery is ordered as a Level 3A Orthorectified product, images from multiple dates are extremely well registered, making it the ideal data source for Our Changing Landscape.

Erg Chebbi, Morocco

If you have ever traveled in Morocco, there is a good chance you have made the trek to the southeastern part of the country to visit what many picture as the Sahara: tall, picturesque piles of golden sand with camels walking slowly over them. In reality, sand dunes only make up a small percentage of the desert landscape, but there is no doubt they are an iconic natural feature. To reach the tallest sand dunes in Morocco, most travelers enter the region through Merzouga which is only several kilometers from the edge of Erg Chebbi. Merzouga is a small city with a few markets, restaurants and several quiet streets lined by pinkish buildings matching the hue of the landscape. Once tourists reach their final destination in Erg Chebbi, they are greeted by 150-meter tall mountains of sand.

Now click on the image above to see a two-frame animation of Erg Chebbi from images having similar lighting conditions. These images were collected on October 9, 2011 and February 14, 2013. In this animation, you can see visible changes in the position and shape of the dunes (particularly the largest ones) that is in line with the range of migration found in academic research. (Images Courtesy: RapidEye)

An erg is a sea of sand formed by the accumulation of eolian (i.e. wind-blown) sand with little to no vegetation and covering an area larger than 125 square km (sq km). While 85% of the world’s eolian sand is found in areas larger than 32,000 sq km, Erg Chebbi is roughly 20 km long by 5 km wide so it is debatable if the name erg even applies.

Erg Chebbi is covered by sand dune after sand dune. A dune is formed when there is abundant sand, ample and steady wind and obstacles on the landscape to capture the blown sand. Dunes generally move across the landscape in the same direction as the prevailing wind. Sand particles are blown up the side of the dune facing the wind, and when they reach the top of the hill, they tumble down the slip face. In this slow and steady progression, sand dunes roll across the landscape, waxing, waning and shifting shape.

While I was unable to find a vast research on the movement of sand dunes, the studies I did find suggest a migration range of 0.7 to 7.5 meters per year. Further, dunes can elongate their shape with a range of 2.3 to 13 meters per year. As a final note, the migration and elongation of dunes will vary across a single region. It is the intent of Our Changing Landscape to track a small area of Erg Chebbi over a 5 year time period and see if change in the sand dunes can be detected with 5-meter RapidEye imagery.

If you would like to find out more about using RapidEye for your academic studies, engineering projects or any landscape analysis, let us know at sales@apollomapping.com or (303) 993-3863.

Have you heard of Greener Maps? If not, check out our new Apollo Mapping side project–it is our better half. Ever so often, we will be giving away imagery to those who are helping the world.

Our first giveaway is for academics–the two winners will receive a minimum size orders of either archived high or medium resolution satellite imagery. The period to submit an application for the contest has now been extended through the Fall 2013 Semester. The exact date will be determined once the semester is under way–we apologize for any confusion this may cause! The contest winner will be based on a combination of votes and academic merit. You can find out more about the academic competition here.

In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a specific geography during a three month window. To do this, we pick a high resolution satellite, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.

This map shows the areas imaged by Pléiades 1 from May 1 to July 31, 2013 over the United States (minus Hawaii) and Canada (in orange). Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.

Graphic Region of Interest: United States (minus Hawaii) and Canada

Land Mass Covered: 19,411,382.6 sq km

Time Period: May 1 to July 31, 2013

High Resolution Satellite: Pléiades 1

United States & Canada Pléiades 1 Imaging Statistics

Total Area Collected: 5,346,465.0 sq km; 58,113.7 sq km per day

Area Collected @ 20% or Less Clouds & 30 Degrees Off-Nadir: 3,657,240.9 sq km; 39,752.6 sq km per day; 68.4% of total

In July, we are unveiling the new and improved Image Hunter, have you checked it out yet?!?! If not, you should!

Listening to the feedback we received over the past months, the new version of Image Hunter features a major overhaul to the user interface as well as to the backend architecture. Image Hunter Version 2 is built on open-source technology so now it works on all computers, not just on Windows machines. We slimmed down the user interface to make it easier to find the imagery filters and other available tools. Image Hunter is now lightening fast with better previews and the option to search for RapidEye imagery.

All things said, we really think you will enjoy your new imagery browsing experience with Image Hunter (Version 2). Launched as a beta version, we fully expect to find ways to improve its user interface and operability. In the past few months, we have worked to improve the reliability and performance of imagery searches–updates on the look and feel based on recent feedback from clients will start soon!

If you have any ideas and/or feedback to improve the new Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.

Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite imagery on the market today, including:

  • WorldView-2
  • QuickBird
  • WorldView-1
  • GeoEye-1
  • IKONOS
  • The Pléiades 1 constellation
  • The entire SPOT constellation
  • RapidEye

If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide preview images, then Image Hunter is the solution to your woes, as it features:

  • Online browsing of satellite imagery from 4 data providers and 14 satellites.
  • Near-instantaneous loading of low resolution preview imagery with collection date, cloud cover and other key metadata.
  • The ability to define your area of interest by address and with coordinates, geometric shape or shapefile/KMZ.
  • Responsive basemap with street names to provide a spatial context when discovering data as well as crowd sourced updates for the most accurate map possible.
  • Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
  • Support for all operating systems, and not just our friends with Windows machines!

The new version of Image Hunter can be accessed here. We are excited to find out what you think about Version 2!

According to researchers at Tufts University, over 1 billion travelers fly annually and 50 million of these make treks to developing countries. And while it is infrequently reported and difficult to assess, there is a risk of disease transmission from these frequent travels. Ever been stopped for trying to bring foreign fruit back to the USA? Or traveled in a country with a recent outbreak of diseases such as H1N1 (swine flu)? If so, you risk the possibility of detainment for quarantine as did travelers from India a few years ago.

So what is it about airline cabins that make them hotbeds for the possible transport of communicable disease? It is due to their design as a ventilated and enclosed environment. Airline cabins expose passengers to hypobaric hypoxia (a condition that affects the body’s ability to transfer oxygen from the lungs to the bloodstream), dry humidity (which can cause your nasal passages and throat to crack, allowing receptor points for disease to enter), and when coupled with the close proximity of passengers, it allows for the easy spread of airborne diseases.

The Hartsfield-Jackson Atlanta International Airport is the busiest in the United States. Though New York/New Jersey’s cluster of airports services the most for a metro-regional area, Atlanta is the single most productive in turnover of passengers at nearly 46 million in 2012. Makes you wonder how many colds and flues were spread through that massive delivery of people, no? Image captured June 10, 2011 by the 50-cm satellite WorldView-2, and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

Most commercial airlines recirculate 50% of their air through high-powered HEPA filters, and while this allegedly removes 99.97% of harmful particles, there has been rising concern about the accuracy of these claims. A panel was formed in 2000 to study these claims, and in 2004, the Aviation Health Working Group undertook a study that assessed factors such as humidity, temperature, air speed and concentrations of carbon monoxide, carbon dioxide and microbiological flora as contributors to the spread of disease. Large droplet and airborne mechanisms were found to be the greatest risk factors, largely due to the high density and closeness of passengers.

Diseases that fall under the category of large droplet and airborne contagions include tuberculosis (TB), SARS and Meningococcal disease. The largest incident of TB transfer was from a flier who traveled from Baltimore to Chicago and then on to Honolulu. Four of fifteen passengers seated within two rows of the contagious flyer tested positive during tuberculin skin tests. SARS is a non-typical pneumonia which is believed to be spread through aerosolized droplets from either direct or indirect contact. During the Amoy Gardens outbreak in Hong Kong, 40 flights were investigated for possible SARS transmission. One flight, a 3-hour trek from Hong Kong to Beijing in 2003, accounted for 22 of 37 fliers that tested positive for SARS. This was somewhat different than the TB example, as the flight was less than 8 hours, and those affected were as far away as seven rows, compared to two with the TB case. For meningococcal disease, transmission is considered in cases where the patient has been on a flight over eight hours within a two-week period. The US Center for Disease Control recorded twenty-one suspected cases in the time period between 1999 and 2001. Other diseases that have been studied are the common cold and influenza, both of which have been reported or suspected in high amounts.

Conclusions from the study were recognition of the right and ability for airlines to prevent suspected travelers carrying communicable diseases from boarding the plane, but that solution was deemed impractical. The researchers stressed the importance of hand-washing and good hygiene as critical to the suppression of disease transmission, and masks were suggested for travelers showing signs of communicable disease.

A report from Fox News states that the aforementioned HEPA filters are not mandatory and as many as 15% of commercial airlines that carry more than 100 passengers do not have the filtration systems installed. The report also states that older systems in place when smoking was allowed on planes used 100% fresh air, significantly lowering the likelihood of disease transmission. So as the rage for retro everything goes on in the fashion world, should there be a return to the airline filtration systems of the past used in tandem with these HEPA filters to minimize the risk of disease transmission? The jury is out, but the research continues.

Justin Harmon
Staff Writer

In this two-part edition of the Geospatial Frequently Asked Question (G-FAQ), I turn my attention to a broad topic we have visited before, that of coordinate systems, with a specific focus on two of the most commonly used, geographic and Universal Transverse Mercator (UTM). While UTM is increasingly used for regional mapping applications, this coordinate system is more complex to work with and can lead to mistaken locations if the proper information is not communicated, for instance zone number.

With this in mind, I address these core questions in this two-part G-FAQ series:

Is this UTM zone number important? How are UTM different than geographic (latitude and longitude) coordinates? When should I use each coordinate system?

Before we jump into this topic, let’s set the stage with a very brief discussion of projection. In the digital world of cartography, we typically simplify projection to refer to a combination of datum and coordinate system. A datum is a representation of the earth’s general shape upon which a geographic coordinate system is based, common ones are WGS84 and NAD83. A coordinate system is a gridded method to define positions on our planet. A geographic coordinate system is based on the angular distance of a point from the center of our planet. A projected coordinate system transforms geographic coordinates to a two-dimensional system that is more appropriate for display on a flat computer screen or paper map. Coordinate systems can be either global in their reach, such as geographic and UTM; or regional, such as state plane which we use in the United States. For a more detailed handling of this topic, please refer to the November 2012 G-FAQ.

The Geographic Coordinate System

Most of us are rather familiar with latitude and longitude (i.e. geographic coordinates) as they are commonly used on globes, wall maps and atlases. They are often written in decimal degrees format, such as 40.52 N, -103.17 W; or in degrees minutes seconds, 40° 31’ 0.2” N, 103° 10’ 0.2” W. The geographic coordinate system was adopted as the global system in 1871 at the first International Geographic Congress. While this adoption was still a matter of dispute for some years after the conference, eventually its recommendation of Greenwich, UK as the zero for longitude (i.e. the Prime Meridian) became convention on maps. By settling on a common global coordinate system, more accurate maps of the ocean, seas and land could be drafted which was an important asset for exploration and global shipping along established ocean routes.

Latitude and longitude represent a point’s position on our planet as its angular distance from the center of Earth. Latitude is the angular distance a point is north or south of the Equator with values ranging from 90° South to 90° North. Longitude is the angular distance a point is east or west of the Prime Meridian with values ranging from 180° East to 180° West. If you were to project every angular point out from the origin to a defined distance, you would create a sphere. As such, a geographic coordinate system is not a map projection by definition as latitude and longitude define a three-dimensional world. A map projection such as UTM is one that takes a 3D world and transforms the coordinates to a 2D flat world. When latitude and longitude is taken together with a datum, you can imagine how a geographic coordinate system is a 3D representation and then not a map projection.

The Universal Transverse Mercator Coordinate System

The concept of the transverse Mercator system can be dated to the 1700’s but it was not widely used until after World War II when it appeared on USGS topographic maps alongside ‘traditional’ latitude and longitude. UTM is a true map projection in that it takes 3D geographic coordinates and converts them to a flat, 2D world. This is achieved by placing a cylinder around the globe so that the open ends of the cylinder point east and west. When you do this, the cylinder touches the globe along a plane that runs north and south. It is where this plane touches the globe that a UTM zone is created, following an orientation from true polar north to true polar south. The globe is rotated 6 degrees longitude and the process is repeated. In this fashion, 60 UTM zones are created, each covering 6 longitude degrees, that are oriented in a north to south fashion (from 84° N to 80° S) across the face of the planet. As the zones follow the alignment of true polar north to south, UTM zones look a bit tilted when lain on top of the globe. Given that the plane defining each zone is close to the planet, when you transform coordinates to UTM distortion is minimized.

Each of the 60 UTM zones are 1,000,000 meters across so they do overlap slightly. They are numbered in succession starting from 180° W so that Zone 1 covers 180° W to 174° W, Zone 2 covers 174° W to 168° W and so forth. Within each of the zones, coordinates are written as a distance east and north of an arbitrary origin. As such, a set of UTM coordinates (i.e. easting, northing) could define a point on our globe at 60 different locations. Therefore, when you give someone UTM coordinates, be sure to also tell them the zone number (and ideally the datum)!

Easting and northing UTM values are determined in the following fashion:

  • Easting–this UTM coordinate is akin to longitude. A central meridian is established in each UTM zone at 500,000 meters. While it is the central meridian from which the meters east (or west) a point is measured, it is established as a value of 500,000 (not 0 as we commonly do for an origin). This is done to avoid negative coordinates, so that the far eastern edge of a zone is 0 easting and the far western edge is 1,000,000 easting. For this reason, this coordinate is sometimes called a false easting.
  • Northing – this UTM coordinate is akin to latitude. Northing is calculated as the distance (in meters) from the Equator. So in the Northern Hemisphere, it is easy to calculate this value. To avoid negative numbers, all northings in the Southern Hemisphere are calculated as meters from the Equator but 10,000,000 is added to the value; this is sometimes called a false northing.
UTM_ZonesA graphic representation of the UTM zones overlain on a map of the world’s continents. You can see that UTM zones are also subdivided as you move north and south of the Equator. These zone letters are usually not included with zone designations. (Graphic Credit: TAMU)

So when you tell someone a set of UTM coordinates, not only do you to communicate the zone number, you need to tell them if the zone is north or south of the Equator. Just knowing a Zone number alone and an easting/northing defines two points on the globe. Here is an example of how to communicate UTM coordinates correctly:

NAD83 Datum; Zone 13N; 4,401,868 m N, 511,419 m E

This point is a location in Denver, Colorado.

Determining the UTM Zone Number of Geographic Coordinates

As a final note to this first part of our G-FAQ series on UTM versus geographic coordinates, let’s close with a way to determine the UTM zone number from geographic coordinates. The process is rather easy:

  1. Take your longitude coordinate in decimal degrees and add 180.
  2. Then divide by 6.
  3. Finally round  up to the next highest whole number.

So for example, the UTM zone number for 39° W would be found through these steps:

  1. -39 + 180 = 141
  2. 141 / 6 = 23.5
  3. 23.5 rounds up to 24

So 39° W is in UTM zone number 24.

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

DigitalGlobe’s Advanced Elevation Series (AES)is a suite of elevation products that are reasonably priced with global coverage. By utilizing existing archive coverage and their constellation of 50-cm WorldView satellites, DigitalGlobe is able to offer an industry first: global elevation data delivered in reasonable time frames at competitive market prices.

There are three basic product offerings within the AES: Mapping, Precision and Very High Precision elevation data. The three products are differentiated by their resolution and accuracy–this information is summarized in the table below. For each of the products, DigitalGlobe offers both a Digital Surface Model (DSM) which include human-made and natural features (such as trees, bushes and buildings); and a Digital Terrain Model (DTM) with these features removed. Other important specifications include:

An animated comparison of 2-meter Very High Precision DigitalGlobe elevation models created over Dunedin, New Zealand; the first image is a DSM and the second is a DTM. (Data Source: DigitalGlobe)
  • Minimum Order Size

    • 100 square kilometers
  • Geographic Coverage

    • Global
    • Price lifts do exist for some Asian countries
  • Cloud Cover

    • 5% or less
    • Cloudy pixels in final product are identified with an Esri polygon shapefile
  • Data Sharing

    • Data can be shared with up to 5 end users for no additional charge
    • Uplifts can be applied to accommodate more end users

A Summary Table of Key AES Product Specifications


* Horizontal and vertical accuracies stated here assume GCP accuracy of 50-cm CE90%/LE90% accuracy or better.

Below is a comparison of two Very High Precision products created over Dunedin, New Zealand: one is a DSM and the other a DTM. DSMs are commonly used in line of sight and watershed analysis as they include human and natural features; while DTMs are commonly used in orthorectification where a ‘true’ model of Earth’s surface is crucial for improved horizontal accuracy. In this animation, we start with the DSM and then transition to the DTM, using the same color ramp with low elevations in red and higher elevations in green.

With pricing to meet different budget requirements and global coverage, DigitalGlobe’s AES elevation suite is the ideal solution for:

  • Regional studies which require an analysis of elevation.
  • Academics in need of a reasonably-priced solution to replace dated and low resolution public sources.
  • Engineers looking to replace costly field labor in distant lands.
  • More accurate orthorectification, particularly in areas of high topographic change.

If you would like more information about the global AES offering by DigitalGlobe, you can send requests to sales@apollomappping.com or call us at (720) 720-7988.

Apollo Mapping is pleased to announce that we have expanded our geospatial services offerings to include web map creation, custom GIS application development  and (coming soon) a flexible GIS cloud. In fact, we already have an example of our web map services as Image Hunter Version 2 was designed and created  by our own development team. This team is based here in Boulder, Colorado so technical support and product development happen in real-time rather than the delayed responses international companies provide.

Image Hunter Version 2 was designed and programmed from the ground up by our product development team here in Boulder, Colorado.

If you give Image Hunter a test, you will find that it displays search results faster than even the imaging companies offer for their datasets with an easy-to-navigate, modern design. We can make your web maps and GIS apps work as smoothly and look as appealing as this–let us show you what we can do for your organization.

Specifically, here are some of the customized geospatial services Apollo Mapping is happy to help you with now:

  • Online web map applications to improve internal business processes, for client-facing government websites and for consumer navigation. We design our web maps with an emphasis on flexible and easy-to-expand architecture, browsing speed and efficient user interfaces. These applications can be hosted in the cloud or on your own servers. We are able to integrate all forms of geospatial data, APIs and media files on the platforms and languages that make the most sense for your project.
  • Custom GIS plugins that help you get the most out of ArcGIS. By building custom applications that are able to automate repetitive GIS tasks, you save time, increase your efficiency and prevent costly errors. We can build GIS apps as simple or complex as your project calls for.
  • And coming soon, a truly flexible GIS cloud that users can get up and running within minutes, not days like the other clouds out there. Our cloud will feature monthly service contracts with real-time tracking of incurred charges, industry-leading data redundancy and data access times quicker than often experienced with internal servers. The Apollo Mapping GIS cloud will be the most user-friendly and scalable product on the market, hands down.

To find out more about our new geospatial application development services, give us a call at (303) 993-3863 or send an email to sales@apollomapping.com.