Researchers at the University of Wisconsin-Madison and Texas &M University have studied the safety and convenience of available parking for truckers along our nation’s highways and interstates. A recent survey by the National Transportation Safety Board indicated that only 34% of truckers find suitable parking at commercial truck stops and travel plazas, and a staggeringly low 11% when public rest areas are considered. The study looked at ten states in the Central United States to assess parking locations and the timing and frequency of use by truckers.
Many a trucker has passed under the Great Platte River Road Archway Monument on I-80, just east of Kearney, Nebraska. It is meant to symbolize westward expansion. Image captured by the 50-cm satellite WorldView-2 on November 22, 2011, and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.The researchers visited four truckers’ conventions to collect survey data, and in total, 317 truckers were surveyed. The respondents indicated nearly 400 issues with truck stops in the ten-state focus area, and the greatest shortages were found to be heavily clustered. The Mid-America Freight Coalition orchestrated a GIS-based survey with a Google Maps interface to address the issue of parking shortages. It allows truckers, freight planners and state patrol officers to login and record their specific parking issues in addition to the time of peak use. In all, there were 21 stops in the study area that were deemed to have severe use issues.
It was ultimately decided, however, that based on cluster analysis, shortages of truck parking should not be considered by a particular location, but rather as parking capacity over the larger area of trucking operations. A related study shows that 34 new locations with parking areas did not have spots for trucks. This suggests that the construction of new facilities in these areas will help to alleviate parking use issues in the aforementioned 21 locations.
Iowa, one of the states in the study region, happens to be home to the largest truck stop in the world, the Iowa 80. Set on a 220-acre plot of land (four times larger than the average truck stop) off of I-80 near Walcott, Iowa, it receives more than 5,000 visitors a day and has parking for 800 trucks. The original truck stop was built in 1964, seeking to provide refuge for a stretch of interstate that goes from New York to San Francisco. Built and still owned by the Moon family, the Iowa 80 states that trucker satisfaction is their #1 priority. Since the construction of the original Iowa 80, they have built six more truck stops from Missouri to North Carolina, along with a plethora of truck washes and CAT scales scattered throughout. Maybe the Moon family can lend their expertise to help alleviate the problems identified by the aforementioned study. Until then, keep on truckin’.
Justin Harmon
Staff Writer
Satellite imagery from the 1960s and 70s is unheard of minus an impressive set of black and white images declassified by the US government in 1992 and 2002. These panchromatic images (some of them are even stereo!) are from a variety of US spy satellite missions launched during 1960 to 1980. The global database contains more than 900,000 images. All of the datasets can be downloaded from the USGS Earth Explorer–one thing to keep in mind is the $30 per image price point to cover scanning and media costs, so I guess this freebie is really a close-to-freebie!
Before I offer you a few tips on accessing these declassified images, a bit on the missions, coverage dates and resolution. These images were captured on film by a satellite in space; and then were literally dropped back to earth where a parachute opened on the canisters so that they could be captured in mid-air by airplanes! The first set of declassified images range from 1960 to 1972 and were collected by LANYARD (6 feet resolution), CORONA (6 to 40 feet) and ARGON (460 feet); The second set ranges from July 1963 to October 1980 and were collected by KH-7 (2 to 4 feet) and KH-9 (20 to 30 feet).
Now here are a few tips to get you up and running with a search for these declassified datasets:
- Be sure to use Internet Explorer when you visit Earth Explorer as Chrome did not give me full functionality.
- The datasets your purchase will be in TIFF format but will not be georeferened. Further, the online previews are only loosely referenced so be sure to check them out before you order an entire scene.
- The easiest way to get started with a search is to click on the map to create a polygon. You can see this step in the first screen capture here.
- To search for just the declassified images, click on the Data Sets tab and select the two items circled in red in the second screen capture. Then click the Results button circled in purple.
- In many locations, there will be more than 100 images in the search results. To see all of these, click the ‘I’ button circled in red in the third capture. The second icon (circled in purple) will bring up georeferened previews images of each dataset.
Until my next edition of Free For All, happy hunting for free geospatial goodies!
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com
In this monthly article, we provide details on updates released each month to Astrium GEO’s 2.5-meter (m) SPOTMaps product. SPOTMaps is an orthorectified natural color imagery layer with coverage over more than 100 countries–totaling an impressive 108 million square kilometers (sq km). For projects requiring a value-priced basemap better than what 15-m Landsat can offer, there is no other choice than SPOTMaps.
SPOTMaps Updates & New Areas–October 2013
- There have been no new updates nor additions since last month
- Iceland is currently being added to the SPOTMaps database
- And South Africa is currently being updated
For those who have never worked with SPOTMaps, below is a summary of key product specifications as well as product differentiators.
A 1.5-meter SPOT 6 natural color image collected over Victoria, Australia on January 2, 2013 showing a cluster of golf courses around Royal Melbourne. If you would like to see some of these golf courses in Pléiades 1 50-cm resolution as a comparison, please click here. In the coming months, SPOT 6 imagery will be used to create new SPOTMaps products. © CNES 2012, Distribution Astrium Services / Spot Image S.A., France, all rights reservedKey Product Specifications
- Resolution: 2.5-m
- Spectral Bands: simulated natural color (RGB)
- Horizontal Accuracy: 10 to 15-m RMSE (root mean square error)
- Projection/Datum: UTM WGS84
- Source Data: SPOT5 satellite imagery
- File Format: GeoTIFF
Product Differentiators
- Recent and ready for immediate delivery and integration with your GIS
- Seamless, orthorectified coverage across countries and entire regions
- Suitable for work up to 1:10,000 scale
- Custom product framing with minimum orders of ~100 sq km
- Product series is updated every month
- Source data can be delivered with all SPOTMaps mosaics
- Volume and academic discounts are offered
- Multi-user licenses are available
- Starting in late 2013 to early 2014, new 1.5-meter SPOTMaps made with natural color SPOT 6 and (coming in 2014) SPOT 7 imagery will be available
The map below has been color coded to show the collection year which makes up the majority of each SPOTMaps mosaic as well as those markets that were updated this month. An Apollo Mapping representative can provide more details on the specific year ranges used in each mosaic.
If you would like pricing details and/or additional product details, such as date ranges and accuracy specifications, please let us know at sales@apollomapping.com or (303) 993-3863.
In the second part of this edition of the Geospatial Frequently Asked Question (G-FAQ), I continue the discussion started last month of geographic versus Universal Transverse Mercator (UTM) coordinate systems. In last month’s G-FAQ, the focus was on the history of each coordinate system as well as the basic question, why UTM zone number is important. For October, I focus on the advantages and limitations of each system to give our readers some advice as to when each is most appropriate.
With this in mind, I address these core questions in this two-part G-FAQ series:
Is this UTM zone number important? How are UTM different than geographic (latitude and longitude) coordinates? When should I use each coordinate system?
The Geographic Coordinate System
What we learned last month is that a geographic coordinate system is technically not a map projection as the coordinates have not been modified to be displayed ‘properly’ on a flat 2D surface. This single fact is at the root of the advantages (and limitations) of a geographic coordinate system.
The Advantages
- A geographic coordinate system is good for locating an exact position on the globe as each coordinate is referenced to the surface of our planet. This ‘exact position’ is crucial for shipping given how remote the open oceans are.
- Geographic systems are truly global as they include the poles–many projected coordinates systems are only valid over a portion of the earth’s surface.
- Latitude and longitudes can be determined with astronomical observations and an accurate time keeper. Projected coordinate systems do not offer this as they are completely arbitrary–another huge advantage when navigating the open oceans before the digital era.
- Since a geographic system is truly global, you can measure very long distances which cannot be done in projected systems. That said, measurements taken in a geographic system on a paper map would not be accurate as you are measuring straight lines on what should be a 3D surface. When measuring these distances in ArcGIS, they should be more accurate as geospatial programs can take this into account. I say should as it is very difficult to impossible to verify measurements of long distances.
- With geographic coordinate systems, it is possible to define a great circle which is the shortest distance one can travel on a globe (i.e. the Earth) between two points. A great circle is created by drawing a plane that intersects the two points on the globe and the center of the planet. Where it touches the surface of the globe is the great circle defining this shortest distance. Now in reality, the surface of our planet is obviously not flat, so the true ‘great circle’ path would have local variations as it travels over mountains and down valleys.
The Limitations
- As you move north and south from the Equator, the diameter of the planet narrows so that at the poles, it is significantly less distance around the globe than at its center. As such, the distance between one longitude degrees shrinks from about 111 kilometers (km) at the Equator to 0 km at the Poles where all longitude lines converge! This means that trying to measure distance based on subtractions of latitude and longitudes value alone is not possible (it takes more complex geometry).
- Similarly, since geographic coordinates are not planar, linear measurements on a map in this system are by definition inaccurate.
So the long and the short is that geographic coordinates systems are ideal for plotting exact positions on a globe; however they are challenging and misleading to use for straight line measurements that many of us try to (understandably) make with maps.
The Universal Transverse Mercator Coordinate System
Now let’s take a look at the advantages and limitations of a UTM coordinate system. As UTM is a projected coordinate system, its advantages and limitations are nearly the exact opposite as for a geographic system.

Click on the image above to see an animation showing a geographic versus UTM coordinate system. I loaded the world’s continents into ArcGIS, first in Geographic WGS84 projection; and then in UTM WGS84 Zone 30N. You can see how different these projections look for global data. Several items to point out–in the UTM projection, you can see that the distortion is minimal in the center (where Zone 30 runs) and then it gets worse as you move out. You can also see that in UTM projection, the far reaches of the globe get cut off on a flat monitor. In the geographic map, you can see serious distortion as you move to the poles in shape and size. Antarctica (for instance) which covers a much smaller area since the poles narrow is displayed as a huge land mass.
The Advantages
- UTM is a cylindrical projection created by encircling our relatively spherical globe with a cylinder that touches only at the Equator. Each UTM zone is then created by projecting a narrow slice of the globe onto the 2D surface of the cylinder. When this is done, shapes that fall inside a single zone have an accurate representation and even larger shapes have minimal distortion. Within 10 degrees of the Equator, there is only about a 1% error in shape. As you move to the poles, the distortion does increase.
- As shapes are well maintained in UTM zones, the distortion in area calculations are also minimal. Similarly, local angle measurements are true as are distances.
- When the world is divided into zones, scale can remain relatively consistent across them. As mentioned with geographic coordinate systems, as you move towards the pole, the distance between 1 degree longitude changes dramatically, you do not see this change in UTM zones.
The Limitations
- The limitation of all projected coordinate systems are large shapes that cover parts of multiple zones. When a shape crosses into more than one zone, it will have increased distortion. Shapes that span more than two zones are not meant to be projected in a UTM system.
- Without a UTM zone number and North or South, a set of Northings and Eastings could fall in any one of 120 locations on the planet. This is a definite limitation if coordinates become separated from zone number info!
- The UTM coordinate system only covers from 80 degrees South latitude to 84 degrees North, an obvious limitation for mapping in polar regions.
- As mentioned above, distortion increases as you move to the poles with noticeable impacts in the northerly and southerly parts of our globe. Scale is still maintained relatively well for small shapes, even close to the poles.
A very simple way to look at using geographic and UTM coordinate systems is this: if you are working on a small area (say less than 500 kilometers across), then UTM is likely the way to go. And if you are working in an area larger than this, then geographic is likely the way to go.
Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.
Find Out More About This Topic Here
- Brown University–Coordinate Systems & The Role of Projections
- Idaho State University–Introduction to Topographic Maps
- National Park Service–Datums & Coordinate Systems Presentation
- Northern Arizona University–Coordinate Systems Workbook
- University of Wisconsin, Green Bay–The Universal Transverse Mercator System
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com
Have you heard of Greener Maps? If not, check out our new Apollo Mapping side project–it is our better half. Ever so often, we will be giving away imagery to those who are helping the world.
Our first giveaway is for academics–the two winners will receive a minimum size orders of either archived high or medium resolution satellite imagery. The period to submit an application for the contest has now been extended through the Fall 2013 Semester. The exact date will be determined as soon as possible–we apologize for any confusion this may cause! The contest winner will be based on a combination of votes and academic merit. You can find out more about the academic competition here.
In July, we unveiled the new and improved Image Hunter, have you checked it out yet?!?! If not, you should!
This month, we really improved the search engine behind Image Hunter so that your results will load even faster! For example, I ran two large archive searches for all data with less than 1-meter resolution, here is what I found out:
- A 6,500 square kilometer (sq km) polygon over Albany, Australia yielded 612 results in under 3 seconds!
- And a 14,500 sq km polygon over Cape Town, South Africa yielded 3,126 results in under 20 seconds!
Listening to the feedback we received over the past months, the new version of Image Hunter features a major overhaul to the user interface as well as to the backend architecture. Image Hunter Version 2 is built on open-source technology so now it works on all computers, not just on Windows machines. We slimmed down the user interface to make it easier to find the imagery filters and other available tools. Image Hunter is now lightening fast with better previews and the option to search for RapidEye imagery. All things said, we really think you will enjoy your new imagery browsing experience with Image Hunter (Version 2).
If you have any ideas and/or feedback to improve the new Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.
Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite imagery on the market today, including:
- WorldView-2
- QuickBird
- WorldView-1
- GeoEye-1
- IKONOS
- The Pléiades 1 constellation
- The entire SPOT constellation
- RapidEye
If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide preview images, then Image Hunter is the solution to your woes, as it features:
- Online browsing of satellite imagery from 4 data providers and 14 satellites.
- Near-instantaneous loading of low resolution preview imagery with collection date, cloud cover and other key metadata.
- The ability to define your area of interest by address and with coordinates, geometric shape or shapefile/KMZ.
- Responsive basemap with street names to provide a spatial context when discovering data as well as crowd sourced updates for the most accurate map possible.
- Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
- Support for all operating systems, and not just our friends with Windows machines!
The new version of Image Hunter can be accessed here. We are excited to find out what you think about Version 2!
- This month’s technology focus is on advances in wind power, one of the most widely-used renewable energy sources:
Many people are concerned that wind farms take a high toll on our avian populations, however this study suggests that these dips are not long-term though construction can have an impact. And how about this related research on the impact of painting wind turbines to reduce accidental bird deaths?
Studies suggest that Lake Michigan is a huge untapped resource for wind power. And how about storing excess power that is generated in an artificial island that is slowly filled with water and then emptied?
Finally, here is an idea to store wind power generated off-shore in the structure used to hold the turbine in place; and here is a design for the world’s longest turbine blades.
- In honor of the Great American Beer Fest (GABF) which is starting in a few days here in Denver, check out this awesome infographic map created by Mike Wirth. Compiled from the results of the GABF after 2009, the map has some great beer stats as well as info on the states with the most medals. Perhaps it will come as no surprise that California and Colorado have dominated the competition but what is less intuitive are the number of awards per capita by state. Check out Mike’s map for a little beer drinking inspiration!
- This month I couldn’t help but Google, “GIS and flood mapping,” and found this great article by Eric Kwabena Forkuo which brings together GIS and remote sensing. In the first step of his analysis, Dr. Forkuo utilizes free ASTER images to generate both a DEM and a land use map for a region in northern Ghana. This information is brought into ArcGIS and then combined with demographic data to assess local flood risk.
- From Hawaii we travel to Idaho’s largest city, Boise, and check in on their GIS resources. The Boise site is well laid out with just the right number of links. They offer customized GIS maps with technology built around Silverlight here (this will not work well on Macs). You can also access several printable maps here and then some predefined online maps here. Finally, GIS shapefiles, etc. are available by request to the GIS department.
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com





