The Great Salt Lake is the largest salt water lake in the Western hemisphere and the eighth largest in the world–the Caspian Sea is the biggest in case you are wondering. Due to its shallow depth, the Great Salt Lake’s extent fluctuates, from as small as 950 square miles in the early 1960s, to as wide as 3,300 square miles in the late 1980s. On average, it covers roughly 1,700 square miles. A remnant of a larger prehistoric lake called Lake Bonneville, the Great Salt Lake and three smaller lakes are the reminders of a period of global warming and passage of a portion of the original water body through the Red Rock Pass in Idaho. Salt Lake City takes its name from the Great Salt Lake, and was once formally called Great Salt Lake City by an integral member of the Church of Jesus Christ of Latter Day Saints, Brigham Young.

The Salt Lake Temple was the fourth temple built in SLC, though the first to begin construction. A dedication date was set (i.e. 4/6/1893), and construction wasn’t completed until the day before. 50-cm color image captured by WorldView-2 on February 2, 2014, and photo enhanced by Apollo Mapping. Image comes courtesy of DigitalGlobe.

Young was the successor to Joseph Smith, who founded the Latter Day Saints movement through the writing of the Book of Mormon when he was 24 years old. Smith was assassinated in 1844 while being jailed by an angry mob of reformists formally associated with his religious teachings. Power in the church then fell to the Quorum of the Twelve Apostles, to which two and a half years later Young was named president. Young was instrumental in the founding of both the University of Utah and Brigham Young University, as well as the first governor of the Utah Territory. He held the presidency for 30 years until his death in 1877.

Although the Mormon faith came to being in New York, the following did not find a place to call home for several years. Heading west to find “Zion,” the Mormons landed in Missouri after a short stopover in Ohio. Eventually they were expelled from the Show Me State and landed in Nauvoo, Illinois. After the death of Joseph Smith and his brother Hyrum, the Mormons, led by Brigham Young, headed for their new home and current center of the Church of Jesus Christ of Latter Day Saints, Salt Lake City, Utah (SLC).

Utah didn’t become a state until 3 years after the Salt Lake Temple was built, and the Utah State Capital (pictured here) wasn’t completed for more than 20 years after the Temple. The Temple was also added to the National Register of Historic Places first. A different spin on the old phrase, ‘separation of church and state.’ 50-cm color image captured by WorldView-2 on February 2, 2014, and photo enhanced by Apollo Mapping. Image comes courtesy of DigitalGlobe.

Today, SLC is known for more than just the church’s presence, though nearly 60% of the state’s population identify as members of the Mormon faith. The Wasatch Range is a mountainous region that immediately abuts SLC, and is home to some of the best skiing in the United States (next to Colorado of course!), and maybe even in the world. There are 8 ski resorts within an hour’s drive of the city, and this makes it a hotspot for international tourism year round, but especially in the winter months. The city was also home to the 2002 Winter Olympics, and thus the creation of significant infrastructure to now house numerous musical, arts and professional events.

But having said all that, when most people think of SLC and Utah, the Mormon influence is usually one of the first things that comes to mind. Even though their presence is felt all over the world (the faith has shown growth every decade since its inception), SLC is its homebase. And what would any religious homebase be without an actual church structure? The Salt Lake Temple covers 250,000 square feet in the heart of the city on a ten-acre plot known as Temple Square. The site was dedicated in 1853, and 40 years after the first cornerstone was laid, its completion came to fruition. It remains the only temple within the Mormon faith that does not have a full name with includes city, state or city, country (e.g. the Bern Switzerland Temple). This reasoning remains a mystery, much as does the ornate beauty of the structure. It is simply a magnificent work of art, regardless of your religious preference, or lack thereof.

Justin Harmon
Staff Writer

Any of our regular readers of the Geospatial Frequently Asked Question (G-FAQ), which is about two of you I am guessing…, know that I am, well, a bit verbose; and this three-part series which grew into a four-parter is no different! This overly-long G-FAQ series focused on the basic question, ‘What is GIS?’ In part one, we looked at the various definitions of GIS; in part two, the history of GIS; and in part three, we started to explore what can actually be done with GIS. In this, the truly final part of the What is GIS G-FAQ series, we will look at the tools available to users, several examples of the problems you can solve and then conclude with my inclusive definition of GIS.

To remind our readers, this G-FAQ series has focused on these core questions:

What is GIS: is it just computer software or is it a science? How did GIS develop into an established field of study? How does GIS work and what can you use it for?

Being that GIS is inherently a tool for spatial analysis, it is important for our readers to understand the concept of scale. Scale defines how large an object is on your screen versus how large it is in reality. For example, your scale might be 1:10,000 which means that an object that is one inch on your screen is 10,000 inches on the surface of the planet. When you are working with surface features where you need a very detailed view of them, this is called large scale; and when you are working on a project covering a very large area, called small scale, you will see less detail.

With GIS software, you are able to zoom in and zoom out on the data you have loaded, viewing it in both small and large scale depending on the exact question you are trying to answer. Do keep in mind that there is a limit to how detailed (or large scale) your analysis can be, and this limit is set by the datasets you are working with. It becomes rather apparent that you are working beyond the scale your data can handle when: (1) you zoom in on a vector edge or a set of vectors, and the boundaries become straight and show no more detail as the scale increases; or (2) you zoom in on your raster datasets and they look like a bunch of color squares (also called pixilation).

As has been alluded to in the previous parts of this G-FAQ series, spatial analysis in GIS hinges upon the attributes and numeric values tied to each feature of your geographic datasets. In the case of a raster, each pixel has a specific numeric value that is associated with a geographic phenomena, such as elevation. A raster can also have multiple layers with different numeric values in each overlapping pixel, for example in the case of a color image with red, green and blue reflectance values as the human eye sees. By having numeric values tied to each cell of a raster file, you are able to complete mathematic functions on a set of data with similar pixel sizes. For example, you might have three raster files with site suitability scores for an endangered animal species ranked from 1 to 5, with 5 the most suitable locations. Each of the three raster files has a suitability score determined by a different factor, perhaps slope, distance from a water body and dominant food type present; by summing the numeric values in each raster, the cells with the highest scores are the most suitable locations for the endangered species; and those with the lowest are the least suitability.

In the case of a vector file, the attributes of each feature are tied to its spatial boundaries through a relational database. This database is essentially a large spreadsheet with each column representing a different attribute and each row representing an individual spatial feature. Take for example a vector file of the world’s countries. The attributes for each country could include 2010 population, country area, average income and government type. Now with these attributes being presented in a standardized format, you are able to rank the countries by population or perform a more complex analysis that relies on multiple attributes. One question you could answer with this vector file is, “Do countries that are democratic have a higher average income?” Or maybe you want to know if, “Countries with a larger area and population tend to be more wealthy?” These are questions that can be answered with spatial analysis in GIS!

Spatial Analysis in ArcGIS

As in part three of this G-FAQ series, I focus here on the tools available for spatial analysis in Esri’s ArcGIS. Having the ability to perform a set of standardized and repeatable spatial functions separates GIS software from its engineering corollary, AutoCAD. For most users of ArcGIS, the spatial functions employed on a daily basis are found in the various toolboxes. Within each toolbox is a set of operations that are grouped together by common themes. In the Desktop version of ArcGIS 10.1, there are 19 toolboxes with more than 650 functions within them. Here are three of the most commonly used toolboxes by Apollo Mapping employees:

  • Conversion Tools–this lets you convert files between the various spatial formats ArcGIS can read.
  • Analysis Tools–these are functions for vectors related to buffering, clipping and merging various layers together.
  • Data Management–this is a huge toolbox with commonly used vector and raster functions. Some of the ones we use most frequently are the functions to change projections; to dissolve the internal boundaries of vectors; and orthorectification of rasters by applying a digital elevation model to the data.

As with most software applications, there are various levels of licenses that increase in price as more of the toolbox functions are unlocked for use.

One way to extend the functionality of ArcGIS is to make custom scripts and toolbox functions using the programming language Python. By creating your own custom scripts, you are able to automate workflows, process large datasets in bulk and even add new functions to the set of standard toolboxes. Python is a highly flexible open-source language that can work across software platforms. When used inside of ArcGIS, you are able to incorporate the prebuilt toolbox functions into the code you develop with a single line of script to further streamline common spatial analysis workflows. Python is an object-oriented language with the following basic hierarchical structure:

  • Object–a variable or piece of memory
  • Expression–these transform objects, such as multiply them by a value
  • Statement–performs tasks based on a set of expressions, such as print, import and export
  • Modules–a complete spatial analysis function or set of statements tied together to perform a more complex task than is possible with a single statement

Another way to automate complex workflows or to process datasets in bulk is called Model Builder. This is a graphic programming language of sorts, so for those of you without a degree in computer science, this could become your best friend in ArcGIS. With Model Builder, you are able to drag and drop the various standardized toolbox functions, connect them together and then add in import and export calls to handle your various spatial datasets. The models you build can even be shared with other ArcGIS users and converted to Python scripts.

What Exactly Can You do With ArcGIS

I recognize that the discussion above about the various tools you can use for spatial analysis is a bit obscure without some real world examples. So in this section, I will walk you through three ‘real world’ use cases for GIS. Bear in mind that there are literally thousands, millions or even more questions that you could answer, so these three examples are only meant to give you a taste and feel for what is possible with a GIS analysis.

(1)  Are there any nuclear power plants located in political hotspots around the world?

Figure 1–a map of political stability and nuclear power plant locations as created by Robin Brehm and her students at SUNY Downstate Medical Center.

This is one of the more straight forward uses of GIS as it is involves little analysis per say but lots of layering of datasets and cartographic work to make the final map as readable as possible. In order to answer this question, you need these three datasets: (1) a polygon vector file of the world’s countries; (2) a point vector file of the world’s nuclear power plants; and (3) information on the political stability of each country as determined by the CIA. Once you gather datasets 1 and 2 which can be found in ready-to-go shapefile format, you need to append the information on political stability found in the CIA Factbook as a new attribute in the country polygon. Now that we have the layers required to put together a map, the final steps are all cartographic in nature: (1) determine a color scheme that shows levels of political stability as a background; (2) put the point locations of the nuclear power plants on top of this stability layer in a color and shape that stands out; and (3) add a title, scale and compass rose. Check out Figure 1 for an example of a map that answers this question.

(2)  What schools are within a half mile of Boulder, Colorado’s police or fire stations?

Figure 2–a map showing the locations of the 19 Boulder schools within a half mile of a police or fire station.

In order to answer this question, we will need the following vector file inputs: (1) a line file of the city limits of Boulder; (2) a point file of the center of Boulder’s schools; and (3) a point file of the center of Boulder’s police and fire stations. Thankfully, Esri makes finding this data an easy task as it is part of the software package you receive when you purchase a license to ArcGIS 10.x. Once the data is all loaded, the next step is buffering the point file for the police and fire station locations by a half mile on all sides. Now we can take the buffered police-fire stations, select the Boulder schools that fall inside of them and then color them differently than the schools outside the buffers. The final step is putting together a nice map of the analysis we just completed, which you can check out in Figure 2.

As a side note, this is a question where scale can come into play. Consider that neither a school nor a police-fire station is a point, in reality it is a parcel of land that should be represented by a polygon. However, when you are working at the scale of a city-wide analysis, using a point file is an appropriate approximation of each site’s location. If you were working at the neighborhood level, it would make more sense to use a polygon to represent the actual school and police-fire station grounds.

(3)  Where are the best suited areas to relocate black bears in the Great Smoky National Park?

Figure 3–a map showing the least to most favorable areas for black bear relocation in the Great Smoky National Park.

Answering this question requires a more complex analysis than is presented in Examples 1 and 2, and it also requires the use of both vector and raster datasets. In order to answer this question on site suitability, you could incorporate a very wide range of data layers but in any GIS analysis, you are often limited to those that you can find readily available. As such, we will focus on the five layers that were used by John Lloyd of North Carolina State University to answer this question: (1) a vector polygon file of vegetation cover; (2) a vector line file of roads; (3) a vector line file of streams; (4) a vector line file of trails; and (5) a raster file of elevation. In order to complete this analysis, the vectors need to be converted to rasters with a cell size equal to our elevation layer. This is required as it is impossible to sum (also called band or raster math) any weighting values we assign to each variable unless the boundaries line up exactly. But then, as was discussed previously (see Part III of this G-FAQ series), the conversion of a ‘precise’ vector to a fixed-cell raster creates a less accurate boundary.

Once the vector files are converted to rasters, each dataset needs to be reclassified on a scale of 1 to 3, with 1 being the least favorable habitat for a black bear. So for example, the road raster layer is weighted according to a cell’s distance from a road: cells within 0.5 miles are weighted as 1; 0.5 to 1 mile as 2; greater than 1 mile as 3. The criteria used to reclassify each layer can be found in the link above to Lloyd’s analysis. In the final step, each of the weighting values are summed with band math. 20% of the final suitability score for each cell comes from the 5 layers, the cells with the highest final value are the most suitable for black bears. You can find a map of the results of this analysis in Figure 3.

My Definition of GIS

For those who have made it all the way through this four-part G-FAQ series, you should now see that GIS is both a mapping software and then the study of using this software to solve spatial problems. By layering together multiple spatial datasets, users are able to make maps as well as answer questions about the world around us. No definition that I can offer for GIS will make everyone happy, nor cover every theme possible, but regardless, let’s end this G-FAQ with what I came up with after writing this series over the past four months:

GIS is a mapping software–and the field of science that studies it–which is used to answer questions on physical and/or human phenomena in a standardized and repeatable fashion.

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here

In addition to the resources used in the first two parts of this G-FAQ series, you can check these out as well:

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

Would you like a 10% or even 20% discount on your next high resolution imagery orders with Apollo Mapping?

I know that I have everyone’s attention now–so here is how you can get that discount!

It’s simple, send Apollo Mapping an email referral who places an order with us, and we will give you a discount on your imagery orders for a three-month period.

Here are the details on how you can secure the 10 to 20% discount:

  1. Send an email to your Apollo Mapping sale representative or to sales@apollomapping.com and give us a virtual introduction to the clients you think will need imagery on their next projects.
  2. If and when any of them place an order for imagery, we will let you know and record that you have a 10% discount coming your way.
  3. You can refer up to two clients for a maximum discount of 20%.
  4. When you are ready to place your next order for high resolution imagery, we will give you the 10% or 20% off you have earned.
  5. This offer will last for three months after your first discounted order.
  6. Once the three months pass, refer up to two clients again and the discount offer starts all over.

It’s that easy to save some serious cash on your imagery purchases with Apollo Mapping!

Thanks for your continued patronage and we look forward to working with you in the near future.

Do you need high resolution imagery now?! And at a price that will not break the bank?

If so, you need to consider EROS B  for your next geospatial project. With the lowest minimum order price for a new collection of high resolution satellite imagery, EROS B is a viable solution for those in need of rapid tasking. The tasked imagery is budget friendly with a guaranteed collection within 7 days of order confirmation anywhere on the planet!



A series of 68-cm panchromatic EROS B images collected outside Saqqarah, Egypt on February 23, 2013. (Image Source: ImageSat International)

EROS B delivers panchromatic-only imagery to assure maximum tasking capacity and thus quicker collections of new data. For our readers who have not worked with panchromatic imagery, it is an excellent substitute for any project that requires natural color data. Admittedly, if your project includes spectral analysis that relies on multispectral bands, then EROS imagery is not an appropriate choice.

Here are some instances where panchromatic EROS B imagery is an ideal choice:

  • Regional mapping projects
  • Site monitoring over remote construction sites
  • Creating elevation models where project timelines are short
  • Planning a demographic survey before you arrive on site
  • Updating a GIS database with current imagery over high growth areas
  • Collecting new imagery over areas that traditionally have high competition

Key Specifications of EROS B

  • Launch Date – April 25, 2006
  • Spectral Bands – panchromatic only
  • Resolution – ~70 centimeter (varies with orbital height, off-nadir angle and imaging mode)
  • Revisit Time–~3.5 days (varies with latitude and off-nadir angle)
  • Swath Width – 7 km (varies with orbital height and off-nadir angle)
  • Bit Depth – 10-bits
  • Average Orbit Height – 510 km

For more information about EROS B, pricing requests or tasking feasibilities, please contact the Apollo Mapping sale team at sales@apollomapping.com.

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s Global Basemap (GBM).

With Global Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of Global Basmap is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

April 2014 Global Basemap Product Update

Response times with any streaming service can be a challenge especially for international users. Recognizing this barrier, DigitalGlobe has now cached every GBM tile in the cloud on approximately 140,000 servers in more than 80 countries. Since hosting the GBM tiles in the cloud, global users have reported significant improvements in service speeds across all delivery platforms, with an 80% average increase in performance!

A coverage map showing available color Global Basemap imagery over Sub-Saharan Africa by location and date.

Global Basemap Product Specifications

  • Geographic Regions Covered: defined area of interest, country-level or global
  • Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 60-cm for other delivery mechanisms
  • Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
  • Update Frequency:  annual, semi-annual or quarterly
  • Data Accuracy: 8.5-meter CE90%
  • Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
  • Pricing Model: transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)
  • Subscription Term:  annual

For more information on the pricing and coverage available in Global Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.

Starting immediately, we are happy to announce that Airbus Defense and Space has changed the standard cloud cover threshold for all Pléiades 1 and SPOT 6 tasking orders to 10% or less. In the past, a 10% or less cloud cover request on Pléiades 1 added $5 per square kilometer (sq km) to the cost of tasking (it was not offered on SPOT 6), so this is a significant savings to our clients.

The minimum order for Pléiades 1 tasking remains at 100 sq km and then 500 sq km for SPOT 6.

As a note to our valued clients, while this 10% or less threshold will be offered on all Airbus tasking orders, we do suggest a 15% cloud cover or less threshold in cloudy and/or highly competitive regions to increase the number of tasking attempts and thus reduce the time to collect.

The rainforest has long provided a major source of seemingly counter-intuitive information to the remote sensing community. Workers have maintained for some time that, as evidenced by a growing body of spectral data, the relative greenness of the canopy is more intense in dry periods than in wet times. But these findings are in direct conflict with some ground-truthed spectral studies, much to the confusion of the field. The conclusions to justify the remote measurements tended to focus on light, rather than water, as being the major limiting factor in the greenness of the vegetation, and those conclusions have stood, until recently. A paper published in Nature this quarter has provided a new answer to the question of high dry-time green values, and the answer may surprise some: magic.

Or, rather, an optical illusion. Indeed, much as the magician would fool us into perceiving the incredible or seemingly impossible by tricking our vision, Morton et. al. propose that the differing sun-sensor geometries at play during the dry and wet seasons are responsible for the values. The most basic way to state the relationship is that during the dry season, the sun and the sun-synchronous sensor are on the same side of the scene, while in the wet season they are opposed. This produces a shadowing effect that under-represents the true spectral reflectance of the scene. In order to very simply illustrate what this looks like, I’d like you to imagine a bowling lane.

WorldView-2 animated GIF of two captures, one from early June and one from Late August. Although there is contrast between the brightness of the images, the portion to note is the increase in shadow lengths.

First, imagine looking down a bowling lane at a set of 10 pins, and imagine they are being lit by a set of lights shining in the same direction that you are looking. In this case, the sides of the pins that you see are well-lit, and the shadows the pins cast are out of sight in the background. Now, imagine a second scenario wherein the pins are instead lit from the other side, so that the pins stand between you and the lights; in this case, the faces of the pins that you see are in shadows. Now, if you replace the bowling pins for trees in the rainforest and the lights for the sun, you have a very good idea of what this paper is proposing. Namely that the trees are shadowing themselves during the wet periods, which in turn decreases the reflected green values recorded by the sensor; and that sun-sensor geometry is the basic cause of this.

These findings could well have broad implications across the science of remote sensing and multi-spectral observation. For instance, these basic geometric principles hold across scale, and could therefore be influencing our observations of crops such as corn; or affecting the spectral signature of hummocky or hilly terrain. What other examples can you think of in which these geometries may be affecting our understanding of remotely-sensed data?

Reference:

Morton, Douglas C., Nagol, Jyoteshwar, Carabajal, Claudia C., Rosette, Jacqueline, Palace, Michael, Cook, Bruce D., Vermote, Eric F., Harding, David J., North, Peter R. J., “Amazon forests maintain consistent canopy structure and greenness during the dry season”, Nature, 2014, vol. 506, pp. 221–224

Cameron Windham
Magellenic Paladin
(303) 210-5592
cameron@apollomapping.com

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s Global Basemap (GBM).

With Global Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of Global Basmap is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

March 2014 Global Basemap Product Update

The color imagery content in Global Basemap continues to grow by the minute. DigitalGlobe has committed to an impressive update schedule that will make this global imagery solution even more robust. In the map below, you can see the percentage of each country that is currently covered with color imagery; in the coming months, more countries will join the top two coverage tiers.


A coverage map showing available color Global Basemap imagery over Western Europe by location and date.

Global Basemap Product Specifications

  • Geographic Regions Covered: defined area of interest, country-level or global
  • Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 60-cm for other delivery mechanisms
  • Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
  • Update Frequency: annual, semi-annual or quarterly
  • Data Accuracy: 8.5-meter CE90%
  • Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
  • Pricing Model: transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)
  • Subscription Term: annual

For more information on the pricing and coverage available in Global Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.