In the first part of this series, we took a look at the nuts and bolts of this widely-used spectral library; and in this second installment, we will look at some of the ways in which workers in the field have made use of this tremendous resource.

In the last section of this series, we took a look at both the ASTER sensor and the vast library of spectral profiles built as a standard reference for multi-spectral analysis and material classification. In this article, we will take a look at land cover investigations through spectral unmixing, which is a primary method for classifying materials in remotely sensed data. But to begin with, what exactly is spectral unmixing?

Spectral unmixing may be thought of, in a very general sense, as being similar to what your brain does while listening to a symphony, in that it is able to parse out discreet instruments from the din of horns, strings and percussion all sounding at once. Though an orchestra is trained to play together as perfectly as humanly possible, your ear and brain are still able to differentiate the french horn’s part from the violins; and this is the same sort of process upon which spectral unmixing is predicated. The technique rests on the premise that each material has a distinct reflectance spectra to it; and that if we can identify the major materials in a single pixel, we can then unmix their spectra into component parts to get a reasonable sense of what is present. To continue our analogy, it would be like identifying and then removing all of the horns from the symphony so that the strings could be more carefully perceived, without getting “lost” behind the strength of the brass. In the case of spectral unmixing, the instruments are the materials on the ground, the sound is reflected light and the ear is a multispectral sensor high above the surface of the planet.

There are two models used to describe how reflected spectra (or photons) reach a sensor, and quite typically one is simple and one is not. These models are known as Linear Spectral Mixing and Nonlinear Spectral mixing. The essence of their difference lies in one basic assumption: Linear Mixing assumes that each photon reflects off only one surface before reaching the sensor; while Nonlinear Mixing allows for a more complex interaction between photons and the materials they reflect off. A good way to think about it is that Linear Mixing is a macroscopic model (light bouncing once off of a flat roof, for instance) while Nonlinear Mixing accounts for very fine interactions such as is found in soils and sands (e.g. one photon reflecting off of a grain of quartz sand and then a hornblende, and so on). Nonlinear Mixing is relatively new and has not been widely validated, and so, for the sake of concision, we focus here on the more established Linear model.

The first step in Liner Unmixing is the identification of end-members within an image. End-members are those pixels that represent the greatest purity, or the least variance in materials therein. When identifying end-members, it is generally suggested to choose central portions of known bodies such as lakes, parking lots, plowed land, burnt areas and so on, or to identify locations through field work that can be used in end-member classification. Taking ground-truthed spectral readings from field sites can also be incredibly useful for yielding quality results. In a Land Use/Land Cover study of an urban area, for instance, typical end-members would be vegetation, high albedo impervious surface (himp), low albedo impervious surface (limp) and soil. Himp includes things like concrete, metal roofs and parking lots, while limp includes asphalt, roofing shingles and the like. Soil generally includes bare ground and dry vegetation as well as cultural features without green vegetation. All of these classes may well be identifiable both on the ground and from imagery.


End-member classification of a three-component system, with soil (yellow), water (blue) and vegetation (green) identified. (Image credit: University of Maryland)

This is when we return to the ASTER spectral library that we covered in the last segment. Not only can the library be used when assigning end-member values, it also becomes valuable in identifying the remaining signals (or materials) that are mixed into the other pixels. When selecting the most pure pixels (or end-members), a semi-supervised method can be used wherein a subsection of the complete library is allocated to perform a sparse solution in the identification of spectrally pure end-members (so termed “sparse” because it makes use of a sparse population of the library). This is an improvement over methodologies that do not make use of a spectral library because it does not rely completely on the availability of pure pixels in an image; and because it reduces reliance on computationally expensive, and often inaccurate, end-member extraction algorithms. The end-members themselves then allow primary unmixing of the remaining pixels with the aid of the spectral profiles in the ASTER library.

Now that we have run through an overview of spectral unmixing and the role of the ASTER spectral library in that process, let’s take a look at an example of both the library and ASTER data being applied to investigate ground cover materials in the Chocolate Mountains of Southern California. Specifically, this study focused on mineral assemblages and the alteration textures associated with below-ground gold deposits.
Zhang et al. in 2007 used ASTER data to map the lithology of 1,215 square kilometers of arid desert land, making primary use of the ASTER spectral library to identify the profiles of four alteration minerals from sub-pixel spectral unmixing (i.e. alunite, kaolinite, montmorillonite and muscovite). These particular minerals are important as they tend to form around the same lithologies that are common gold-bearers; and indeed the distributions of these minerals that were identified in this paper were in close association with the units that are most typically gold-bearing. In addition to these alteration minerals, the technique proved capable of mapping a number of geologic units, including volcanic, grantic and metasedimentary formations, with even more specific identification of flood basalts, gneissic units and muscovite schists. The results of this study, which primarily used the 30-meter resolution SWIR and 15-meter VNIR bands on ASTER, are impressive for a few reasons. When compared against existing lithology maps of the study area, the analysis proved to be 84% accurate, with 86% accuracy in gneissic terranes. In addition, the technique correctly identified two bodies of gneiss that had been left off the lithology maps. The corroboration of units that had not been identified on the original maps by field checks of the remotely sensed results is particularly remarkable, and lends a good deal of weight to the inclusion of these spectral techniques in mapping projects of all kinds.

So, how do you, or would you, go about using this technique to learn more about the materials that populate the surface of any planetary body?

Cameron Windham
Magellenic Paladin
(303) 210-5592
cameron@apollomapping.com

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s Global Basemap (GBM).

With Global Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of GBM is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

May 2014 Global Basemap Product Update

As part of the GBM USA Refresh 2.0 product, DigitalGlobe has committed to having coverage over 90% of the United States and Territories (except for Alaska with a 70% commitment) by the end of 2014 that is no older than 12 months. This aggressive GBM update commitment will continue into 2015 and beyond. To this end, GBM Refresh 2.0 is already approaching this goal in several states and regions of the US:

A coverage map showing available color Global Basemap imagery over the Middle East by location and date.
  • California–81% less than 12 months old
  • Connecticut–89% less than 12 months old
  • District of Columbia–100% less than 12 months old
  • Hawaii–88% less than 12 months old
  • Nevada–80% less than 12 months old

Global Basemap Product Specifications

  • Geographic Regions Covered:  defined area of interest, country-level or global
  • Maximum Imagery Resolution:  50-centimeters through WMS and WCS; 60-cm for other delivery mechanisms
  • Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
  • Database Update Frequency:  annual, semi-annual, quarterly or daily (for Refresh 2.0 only); updates are to limited portions of the database, not the entire database
  • Data Accuracy:  8.5-meter CE90%
  • Database Access:  OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
  • Pricing Model:  transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)
  • Subscription Term:  annual

For more information on the pricing and coverage available in Global Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.

Would you like a 10% or even 20% discount on your next high resolution imagery orders with Apollo Mapping?

I know that I have everyone’s attention now–so here is how you can get that discount!

It’s simple, send Apollo Mapping an email referral who places an order with us, and we will give you a discount on your imagery orders for a three-month period.

Here are the details on how you can secure the 10 to 20% discount:

  1. Send an email to your Apollo Mapping sale representative or to sales@apollomapping.com and give us a virtual introduction to the clients you think will need imagery on their next projects.
  2. If and when any of them place an order for imagery, we will let you know and record that you have a 10% discount coming your way.
  3. You can refer up to two clients for a maximum discount of 20%.
  4. When you are ready to place your next order for high resolution imagery, we will give you the 10% or 20% off you have earned.
  5. This offer will last for three months after your first discounted order.
  6. Once the three months pass, refer up to two clients again and the discount offer starts all over.

It’s that easy to save some serious cash on your imagery purchases with Apollo Mapping!

Thanks for your continued patronage and we look forward to working with you in the near future.

Ukraine has been in the news a lot lately, and mostly in a troubling light. Their eastern border is in a struggle for its autonomy, and tensions continue to escalate. However, Ukraine is a big country, and while the issues that are taking place with Russia are concerning, the largest country in Europe–at more than 230,000 square miles–there are areas to focus on for positive reasons.

Chernivtsi is in the western part of the nation, and is home to about a quarter of a million people. A mere fraction of the country’s entire population at 45 million, it is still a significant city rich in history. Alongside Lviv, the two cities are considered the cultural centers of western Ukraine. In addition to its rich artistic and cultural history, higher education is also a staple of the region. Chernivtsi State University currently resides in the buildings built for the residence of the Bukovinian and Dalmatian Metropolitans; it is a theological faculty, which the University adopted in its early years. The college eventually dropped the theological department from its offerings, only to reinstitute the focus in the late 1990s.

Once dubbed “Little Vienna,” Chernvitsi, Ukraine is considered the cultural hub, alongside Lviv, in the western part of the country. From above we see sprawling fields surrounding rural homes on the edge of town. 50-cm color image captured August 19, 2012 by WorldView-2 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

Chernivtsi has a storied past as its history of establishment dates back to the early 15th Century. At times it was held by the Turks and Romania; and it was acquired by the U.S.S.R. in 1940. In 1944, when the Axis Forces were driven out by the Red Army, the city was reincorporated into the Ukrainian SSR. In 1991, it became a part of independent Ukraine. The city was key to the Bricha during WWII, the underground effort that helped Jews escape post-war from the horrible atrocities of the Holocaust. The Jewish people have a long connection to the city, and this is most visibly obvious by the presence of the Jewish cemetery built in the late 1860s. It is the final resting place of more than 50,000 Jewish people, and also includes four mass graves that contain the remains of Jewish soldiers from WWI, Turkish soldiers and Romanian citizens who died in the early stages of WWII and victims of the Holocaust from 1941.

The great country of Ukraine is also home to a popular American celebrity: Mila Kunis. Most popular on TV for her work in That 70’s Show and with a host of big screen smashes, such as Forgetting Sarah Marshall and Ted, Mila moved from the Ukraine early in life at age 7 to Los Angeles with her family. However, their roots in the arts and culture are not dependent on American pop culture. Theaters, philharmonics, music halls and more fill the great streets of Chernivtsi, making for a vibrant scene that has hosted many prominent Ukrainian artists throughout its history. Throughout the country, its unique architecture provides a setting for their illustrious history of expressive arts.

The historical region of Bukovina, which is comprised of Ukraine and Romania, dates back to 1775; while originally part of Moldavia, it provides the geographic backdrop to this Eastern European city. Bukovina is ethnically diverse, comprised of Ukrainians, Russians, Romanians, Poles, Jews and Roma people. Home to the first Yiddish language conference in 1908, the Czernowitz Conference, Chernivtsi is truly a cultural center. With a rich and diverse amalgam of people and cultures, coupled with significant regional and national struggles to survive, Ukraine and Chernivtsi will continue to have a presence on the international spectrum, beyond what is currently transpiring in the East.

Justin Harmon
Staff Writer

Many of our readers have likely not heard of KOMPSAT-3. If you are one of them, we suggest you think about it for your next project requiring high resolution satellite imagery. And in particular, for those of you who work with vegetation and/or spectral analysis as KOMPSAT-3 is the only high resolution satellite in the world to collect data in the afternoon. Further, KOMPSAT-3 has the highest data quantization of any satellite on the market.

If you are not familiar with KOMPSAT-3, here is a summary of the key satellite specifications:


70-cm natural color sample images collected by KOMPSAT-3 on February 24, 2013 over Marrakech, Morocco. This data has been photo enhanced by Apollo Mapping. Additional samples of color 70-cm KOMPSAT-3 imagery can be found here.
  • Launch Date: May 17, 2012, 16:39 UTC
  • Spectral Bands:
    • Panchromatic
    • 4-band multispectral (blue, green, red and NIR)
  • Sensor Resolution:
    • At nadir–70-cm panchromatic & 2.8-m multispectral
    • 20° off-nadir–82-cm panchromatic & 3.28-m multispectral
    • 30° off-nadir–1.02-m panchromatic & 4.08-m multispectral
    • 45° off-nadir–2.11-m panchromatic & 8.44-m multispectral
  • Dynamic Range: 14-bits
  • Revisit Frequency: (at 40°N)
    • 1.4 days (< 45° off-nadir)
    • 4.1 days (< 20° off-nadir)
  • Mean Local Crossing Time: 13:30 local time (approximate; across lit side of Earth)
  • Footprint Width: 16 km (at nadir)
  • Maximum Collection Geometry:
    • Mono, strip mode–16 km x 4,000 km (1 strip wide)
    • Mono, wide area mode–48 km x 100 km (3 strips wide)
    • Stereo, single pass mode–16 km x 200 km (2 pairs wide)
  • Daily Collection Capacity: 300,000 sq km
  • Georeferenced Horizontal Accuracy: 48.5-m CE90 (global average, dependent on terrain)

Having worked with sample images for the past several weeks, we are impressed with the crispness of KOMPSAT-3 data and its color reproduction. We feel that KOMPSAT-3 separates itself from other high-resolution satellites in two key ways:

(1)  14-bit depth which is important for spectral analysis. With 14-bit depth data, KOMPSAT-3 has a maximum digital number (or pixel value) range of 16,384 units. Compared with the maximum digital number range of 4,096 for Pléiades 1 and then 2,048 for the other high-resolution satellites in orbit now, this is a significant advantage for you remote-sensing academics and professionals out there.

(2)  A 1:30 PM local collection time. All other high-resolution satellites collect imagery during the mid-morning, so an afternoon collection time can be an advantage in persistently cloudy areas like tropical islands. This is also an advantage for vegetation analysis as chlorophyll concentrations change though out the day; so coupling KOMPSAT-3 with imagery collected during the morning, can give researchers a more complete picture of plant health.

If you are interested in pricing, coverage and/or have any additional questions about KOMPSAT-3 data, please let the Apollo Mapping sales team at sales@apollomapping.com or (303) 993-3863.

Earth Day has been celebrated every year on April 22nd since its inception in 1970. In 1968, the U.S. Public Health Service organized the Human Ecology Symposium, an environmental conference for students to learn about the degradation of the Earth’s resources and its impacts on human health. Its organizer, Morton Hilbert, spent the next 2 years with his students organizing the first Earth Day. Hilbert went on to make waves in other arenas, specifically his efforts in relocating Vietnamese refugees in the early 1950s, but he will be best known for his collaboration with Senator Gaylord Nelson who was integral to the establishment of Earth Day. After touring the oil spill ravaged area of Santa Barbara in the 1960s, Nelson, aboard a flight to San Francisco posited that:

Where there’s smoke, there’s fire. This industrial chimney spits out fumes that have the potential to cripple all living things; fitting that they reside in Springdale, PA, the home of Rachel Carson, author of Silent Spring. 50-cm color image captured April 21, 2014 by WorldView-2 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.
Another scene from Carson’s hometown, these industrial plants sit on the Allegheny River, no doubt acting as red flags to the potential for environmental hazards when industry and nature meet. 50-cm color image captured April 21, 2014 by WorldView-2 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

“If we could tap into the environmental concerns of the general public and infuse the student anti-war energy into the environmental cause, we could generate a demonstration that would force the issue onto the national political agenda.”

And this is what he did in partnership with Hilbert and several committed students. The vision for Earth Day was for people to act locally, for the day to be decentralized and for it to be as entirely grassroots as possible. Today it is celebrated in 192 countries. There have been pivotal points along the way that have led to the day’s success, most notably in 1990 when the mobilization of 200 million people spearheaded recycling efforts and laid the ground work for the Earth Summit in 1992, orchestrated by the United Nations Conference on Environment and Development. There were 172 nations represented, with 166 sending their heads of state or government. The conference produced the nonbinding resolution, Agenda 21, containing guidelines on sustainability, such as the Forest Principles which extends to the conservation of forested lands; and the Rio Declaration on Environment and Development, with principles for local engagement in sound economic growth. Earth Day 2000 included a virtual world which increased its reach across the globe.

Many people credit the roots of Earth Day to a few years before the influential symposium coordinated by Hilbert; as some say it started with the release of Rachel Carson’s book, Silent Spring, in 1962. In the 1940s, Carson became concerned with synthetic pesticides, specifically DDT, a compound used to fight fire ants and mosquitos. Its use caused the unintentional death of thousands of birds, and it led Carson to dig deeper. Working alongside the Audubon Society, she spent four years compiling data about the collateral damage of pesticide use on all living things. She began writing her monograph feverishly in 1960, culminating in 1962; when published, the book was an international eye-opener. Her choice of title was inspired by a Keats poem with the lines, “The sedge is wither’d from the lake, and no birds sing.”

So what has Earth Day done for us? Many have criticized it, saying that it is only a show and that its impact is not far-reaching. Those same critics say that people think one day of doing well is enough, and they most often return to their old (bad) habits. But as more people do come to participate, and as the global climate shifts (both literally and figuratively), it may be the impetus for further real change. While it has been around for three and a half decades, its growth shows there is more work to be done, and more people to sway to make every day an Earth Day.

Justin Harmon
Staff Writer

During April, we started a limited beta test of the GISrack and found several bugs and improvements that needed to be made.  We are busy smashing these bugs to improve the user experience of our spatial cloud. We hope that beta testing with a larger audience will begin during July but cannot be 100% sure of this. We will keep our readers updated each month on the progress we have made with the GISrack in this regular feature.

While we have your attention, now is a great time to explain a bit about the GISrack. Some of you may have used other GIS cloud services in the past, and in many ways the GISrack will be similar to these. But the GISrack will distinguish itself in a variety of important manners. Here is a list of the key features that will be unique to the GISrack:



  • Near-instant set-up–unlike other GIS clouds, the GISrack will take less than five minutes to sign up for, load data on to and get started using. No other cloud comes close to that flexibility.
  • Tons of free spatial data–included with every subscription is access to more than 4 terabytes (TB) of free vector and raster data covering the United States and many parts of the world.
  • A marketplace for spatial data – all users will have access to a library of spatial data that can be added to your GIS cloud. Further, users will be able to post data they have created to the marketplace to sell to other users (or let them use for free if you wish).
  • Cloud computing – we will ask all users for feedback on the spatial operations they perform most frequently and will then implement the most popular ones in the GISrack.
  • Free entry-level subscriptions – users will be able to use the full-functionality of the GISrack with up to 25 megabytes (MB) of free storage and bandwidth. And once you pass this storage limit, subscriptions will start at just $5.00 per month!
  • A robust online viewer–for those users in your organization lacking access to a GIS application, the GISrack will feature an online viewer that can be accessed from anywhere in the world as long as users have internet access.
  • Enhanced browsing speeds – we will have all of your spatial data cached in multiple locations around the world so access times will be greatly reduced for international users.
  • Flexible streaming architecture – administrators will be able to setup multiple WMS and WFS feeds that can be shared with the appropriate teams of data users. Each feed can be seeded with the datasets these users need access to.
  • Industry-leading data redundancy – with 99.999999999% data redundancy, you can be assured that your data will not be lost once placed on the GISrack.

Do you have any specific questions you would like answered about the GISrack? Or perhaps you want to join the beta program? If so, let us know by email at sales@apollomapping.com.

For projects requiring a more detailed look than can be offered by the common free sources of elevation data and for those in cloudy or hard-to-reach regions where this data is of poor quality, Astrium GEO’s Elevation10 product suite is the ideal solution. Elevation10 is a 10-meter digital elevation model (DEM) derived from stereo pairs collected by the radar satellite, TerraSAR-X. These DEMs are often delivered within a month of order placement utilizing data obtained in the past two years.

TerraSAR-X is a synthetic aperture radar (SAR) satellite, meaning it is an active sensor unlike the optical satellites most of us are familiar with such as QuickBird, Pleiades 1 and WorldView-2. An active sensor (1) creates an energy pulse, in this case radar waves; (2) aims them at a surface, in this case our planet; and then (3) very accurately measures the amount of time it takes for this pulse to return to the sensor. Radar waves can pass right through clouds which are an optical satellite’s worst nightmare.

As TerraSAR-X measures the time it takes for energy pulses to return to its sensors as well as its position in space in the XYZ directions, radar stereo pairs have higher accuracy than do traditional pairs collected by optical satellites. This means that elevation data extracted from TerraSAR-X stereo pairs is accurate even without the use of ground control points. Ground control points can be expensive to collect–particularly in remote and unsafe areas–so this can be a significant cost savings vis-à-vis other elevation products.

Elevation10 is created from TerraSAR-X radar stereo pairs collected in StripMap mode. StripMap data has resolution up to 3-meters with a footprint that is 30 kilometers (km) wide by 50 km long. By employing TerraSAR-X stereo pairs collected in both ascending and descending directions, Astrium GEO is able to remove many of the anomalies that are common in SAR elevation data.

Click on the image above to see an animated comparison of 10-meter Elevation10 (both a DSM and DTM), 30-meter ASTER GDEM and 90-meter USGS SRTM data over Barcelona, Spain. (Image Sources: USGS, JPL and Astrium GEO)

Elevation10 is offered as both a digital surface model (DSM) which includes vegetation, buildings and other human-made structures; and as a digital terrain model (DTM) where these have been removed. DTMs are hydrographically enforced to make sure that features which impact water flow, such as dams and embankments, are represented. Hydrographic enforcement is also offered with DSMs. The accuracy specifications for Elevation10 are as follows:

  • Absolute Horizontal Accuracy–5 to 10 meters (Circular Error 90%, CE90)
  • Absolute Vertical Accuracy–5 to 10 meters (Linear Error 90%, LE90)

For regions of the world with limited access, such as the Himalayas and the Andes, or in regions with persistent cloud cover and/or haze, such as Malaysia and Beijing, Elevation10 is the ideal solution. Elevation10 data is priced by the square kilometer according to the product type with academic discounts available. For more information about Elevation10, contact your Apollo Mapping sales representative at (303) 993-3863 or sales@apollomapping.com.