On August 13, 2014, DigitalGlobe successfully sent the next-generation high-resolution imagery satellite into space, WorldView-3 (WV3). WorldView-3 joins its two siblings, WorldView-1 and WorldView-2 (WV2), orbiting our planet a mere 617 kilometers from its surface! DigitalGlobe has set a track record of calibrating satellites quicker than any other company in the industry, so we fully expect WV3 imagery sales to start before the end of 2014.

Hands down, WorldView-3 is the most technologically advanced satellite ever launched. Building upon and extending the technology of WV2, WorldView-3 features higher resolution, more spectral bands and greater agility than any other commercial satellite in the marketplace.

Here are the features that really set WV3 apart from the competition:

As WV3 sped through our atmosphere reaching an orbit more than 600 km above the planet, its 50-cm panchromatic-only sibling, WV1, captured this time series of the launch from its heavenly position.
  • Improved Resolution
    • Higher resolution means you can see more detail in WV3 imagery.
    • Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m short-wave infrared and 30-m CAVIS bands.
    • At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m short-wave infrared.
    • With the easing of US government regulations, we will be able to provide WV3 imagery at a maximum of 30-cm resolution.
  • Additional Spectral Bands
    • If spectral analysis is part of your project, then no other satellite can match WV3 with its 8 bands of visible and near-infrared data; 8 shortwave infrared bands which are crucial for geological studies; and 12 CAVIS bands to detect water vapor, dissolved aerosols, snow, clouds and more.
  • Better Positional Accuracy
    • With accuracies of 3.5-m CE90% or better (without ground control even!), WV3 has no rivals for its enhanced positional accuracy.
  • Daily Revisits
    • At 40 degrees latitude, WV3 will be able to image each location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
  • Increased Collection Capacity
    • WV3 features a 13.1-km swath width (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day.
    • Improved control movement gyros translate into a larger maximum contiguous collection area per pass with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.

Please keep a look out at upcoming editions of The Geospatial Times for updates on WV3 imagery availability, product samples and pricing. If you have any specific questions about WV3 now, please send us an email at sales@apollomapping.com.

When I started my adventure called grad school, I was actually a human geography major with a focus on African development. As such, my Free for All for this month is a shout out to the world of development. The folks at AidData.org seem to be obsessed with mapping development projects and I applaud their efforts as maps are the best! On their website, you will find a plethora of data, online maps, APIs and much more–in fact, it seemed the more I explored their website, the more I found.

Here are a few highlight of AidData.org website, I suggest you explore a bit more to find what might interest you:

An example of a map you can make with AidData.org, this one shows global food security statistics.

As a quick heads up, do not add in the “www.” if you type in your own URL as it will fail!

Until my next edition of the Free For All, happy hunting for free geospatial goodies!

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

We are excited to announce that starting immediately 40-cm satellite imagery products from DigitalGlobe’s constellation are ready for purchase! While the change in resolution from 50-cm down to 40-cm might sound like a 20% increase in the number of pixels you would receive, it is actually a 56.25% increase given that you will receive additional pixels in two dimensions. This can be a serious advantage for spectral and visual analysis where the features of interest are at the detection limits of 50-cm imagery products.

Here are some specifics on 40-cm DigitalGlobe imagery products to keep in mind when placing an order for this data:

(1)  This change in resolution from 50-cm to 40-cm only impacts GeoEye-1 and WorldView-2 imagery. DigitalGlobe’s other sensors (i.e. IKONOS, QuickBird and WorldView-1) collect data with a ground sampling distance* equal to or higher than 50-cm.

(2)  At nadir, GeoEye-1 collects 41-cm imagery and WorldView-2 collects 46-cm imagery. As the off-nadir angle of collection grows, so does the ground sampling distance; and so, in many cases, it would not make sense to deliver GeoEye-1 and WorldView-2 at 40-cm resolution. Your Apollo Mapping representative can help you decide if it makes to deliver these imagery products at 40-cm or 50-cm resolution.

(3)  The change in resolution from 50-cm to 40-cm also impacts multispectral data. You can now order multispectral data at a maximum resolution of 1.6 meters.

(4)  40-cm imagery products will be offered at the same price as 50-cm products through the end of September 2014. Pricing for 40-cm products will be available from Apollo Mapping during August and will be published in the next newsletter when released.

(5)  In some cases, 40-cm imagery products will take longer than 50-cm products to deliver given the extra processing and file sizes required for the increased resolution.

(6)  New collections at 40-cm resolution are only available for these countries during Quarter 3 2014, they will start globally beginning Q4 2014:

  • Algeria
  • Antarctica
  • Australia
  • Chad
  • Greenland
  • Libya
  • Mali
  • Mauritania
  • Morocco
  • New Zealand
  • Niger
  • South Africa
  • Tunisia
  • Western Sahara

(7)  In our September edition of The Geospatial Times, we will feature comparisons of 40-cm and 50-cm imagery products over the same locations.

For more information about these exciting resolution changes, please contact the Apollo Mapping sales team by email at sales@apollomapping.com.

* Ground sampling distance is used here to describe the area of ground that is covered by a single pixel during imaging, for example 41-cm for GeoEye-1 when collected directly at nadir. Resolution is differentiated then from ground sampling distance as it is the area of the ground covered by each pixel in the imagery, for example 40-cm or 50-cm for GeoEye-1 products.

Monterrey, Mexico, the capital of the northeastern state of Nuevo Leon, has been in the news a lot in the past several years, but often not for good. The area is rife with drug and cartel activity, and there have been political issues as well fueling the fire. In 2012, one instance of violence turned up 49 decapitated bodies between Monterrey and nearby Reynosa, the work of warring gangs. At the time, there was much concern for the civilian population, as well as for tourists and expatriates living in the area; but authorities were quick to point out that all of the deceased had some connection to illicit activity. If that doesn’t help you sleep better at night, phew…  Well, that was 2012, this is 2014. In March, an American entrepreneur was kidnapped and held for ransom for 36 hours before he and another victim escaped from a moving truck to find their way to safety.

Originally operated as the Monterrey Foundry at its inception in 1900, the industrial park closed in 1986, leaving a valuable plot for the government to transition into a recreational hub. 50-cm color image captured on May 17, 2014 by GeoEye-1 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.
With a water park that rivals many Six Flags in the United States, Fundidora Park is a great place for family fun. Also a hot attraction at Fundidora is the theme-based Sesame Street park, Bert and Ernie are south of the border, too! 50-cm color image captured on May 17, 2014 by GeoEye-1 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

But it hasn’t always been like this. As recently as 2005, Monterrey was deemed the safest Latin America city to live in, and it has historically been a financial stronghold. However, in 2010, the city fell victim to the violence that affected much of the country in the border regions near the United States. Now the city hopes to return to its prowess as one of the industrial and technological hotspots of the country. Monterrey is home to an elite university, over 100 industrial parks and several multinational companies. With new efforts between private interests and local government, security has been significantly improved in the last two years, and some speculators claim that Monterrey is set for a technology boom. Coupled with that, the area has been deemed an attractive place for investment, and this is in no small part to the state being responsible for 8% of GDP while only having 4% of the country’s population.

The area surrounding Monterey is home to a bastion of natural beauty. The Saddle Mountains and the Monterrey National Park are filled with amazing sites such as waterfalls, various varieties of reptiles, birds and large mammals too. The oso negro (black bear) and puma are two of the larger critters you’ll find within the confines of the park. The city has been progressive in its desire to conserve its natural resources, and this can be seen in other ways outside of the establishment of local and national parks; for example, in water conservation projects and working partnerships with farmers to maximize the utility and efficiency of their agricultural programs.

And of course, the city has beautiful architecture and art as well. Some of the most prized art is done by the abstract structure designer Maestro Sebastian.  He is considered by many to be one of the most prized living artists in Mexico. His sculpture entitled, Monterrey’s Door, appears as a sort of looking glass into the natural and industrial beauty of the region, and has a resemblance to St. Louis, Missouri’s Arch, or Gateway to the West. Monterrey is also home to Fundidora Park, a recreational area built over an old steel and iron plant opened in 1900, the first of its kind in Latin America. The park has five entrances, giving it sort of a pentagon feel from overhead, and is a fine arts and cultural center with 5-star hotels, auditoriums and several museums. Monterrey may have hit a rough patch recently due to the unrest in Mexico, but their storied history and bright future seem to be paving the way to success.

Justin Harmon
Staff Writer

I’m old enough to remember the time before cell phones. I remember when you had to actually coordinate with people where to meet and when, and you had to stick to your plans. I remember when people used to look where they were going when they were walking. I remember the time when every stupid thing I did wasn’t caught on video.

Ah, the glory days… we are, and have been for quite some time, a cellular and mobile world (pun intended). We are heavily dependent on our electronic gadgets. For many of us, much of our life is contained in that 3×5 index card looking thing. And with the recent ruling by the Supreme Court that law enforcement agents need a warrant to access the data contained in our phones, it gives further credit to the value of the phone as both a personal and professional necessity.

But what also comes along with these super handy, and sometimes awesome devices, is their inevitable ability to become outdated–and often very quickly. Much as with laptops, mp3 players and tablets, it seems like the next best thing comes out right after you buy your new toy. So what do many of us do? Clearly we buy the next best thing as soon as money allows. And herein lies the problem: what do we do with our old gear? Some of us stockpile them in an old shoebox making for a great time capsule submission that would chronicle our fast-paced technology development (as well as our materialistic culture and inability to be happy with simple things), while others of us recycle and still others discard.

The Sugar Grove Station in West Virginia is operated by the NSA and has the charge of intercepting all international communications entering the eastern United States. Oh yea, Big Brother is watching you… 50-cm color image captured on July 9, 2010 by WorldView-2 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

You may say, “so what if I throw out my old phone?” Well, you just might be creating further problems for our environment, and maybe indirectly for yourself. Since no one wants to have their intimate secrets and nudie pictures to be commandeered through some seemingly well-intentioned phone recycling scam, many people choose to go the route of the garbage can with their outdated talk-boxes. So let’s break it down, what is so bad about pitching an old phone? Well here are the stats: More than 80% of electronic devices are discarded in landfills, and they have the potential to release harmful toxins into the air and soil. While e-waste represents only 2% of our trash in landfills, it makes up 70% of our toxic waste. Cell phones contain high percentages of precious metals like gold and silver. As a country, we throw away $60 million in gold and silver a year! The average American replaces their phone every 22 months; and in 2010 alone, there were 150 million phones discarded.

So we don’t want that stuff in our ground, do we (we want the gold in our banks!)? No, of course not. So what do we try to do with it? Export it to Third World countries so they get the negative side effects that come with the disposal of heavily toxic waste. The United States is the only industrialized country to not ratify the Basel Convention, an international treaty that makes it illegal to traffic in toxic waste. But we’re a consumptive society that wants the next great thing, and were also very heavily NIMBY. So what to do? I don’t have an answer, in case you were expecting one.

But cell phones cause other problems too. People who talk on them loudly in public venues are annoying and rude. People get distracted and use them when driving, and this has the potential to be the cause of severe accidents. And still others find the radio waves to be harmful to their quality of life and health. Some have gone as far as to live in shielded cages designed to protect them from electromagnetic radiation. Man, that would be a tough life. So what can someone who is more than just annoyed by our cellular culture do? Move to Green Bank, West Virginia, part of the U.S. Radio Quiet Zone. No radio transmitters are allowed within 10 miles of the facility. No cell phones, no Wi-Fi allowed. Can you hear me now? No? Good.

Justin Harmon
Staff Writer

In this month’s edition of the Geospatial Frequently Asked Question (G-FAQ), we turn our attention to the question of horizontal accuracy in high-resolution imagery products. While it seems like a topic that should be relatively straightforward, surprisingly it is wrought with complexities. Broadly speaking, orthorectification is the process of improving the horizontal accuracy of imagery; and as such, it will be the focus of this two-part series.

In this two-part G-FAQ series, we focus on this set of core questions:

What is the difference between georeferenced and orthorectified imagery? How is orthorectification completed and its accuracy tested? What are RPC files and how are they used in orthorectification?

Before we jump headlong into this two part series on orthorectification, let me frame the discussion a bit. First, my focus here is on high-resolution satellite imagery as that is where my knowledge base lies. While many of the principles discussed here would apply to aerial imagery as well, there are certainly topics relevant to aerial data and orthorectification that will not be covered. Second, my focus is on high resolution data and not on medium resolution data. This is done consciously as many medium resolution imagery products are simply too coarse to see features distinctly; and if you cannot see features (such as a sidewalk), then assessing the accuracy of an orthorectified dataset is impossible. And finally, the intent of this G-FAQ series is to address the basics of orthorectification so that our readers have an understanding of how an orthoimage is created and how its accuracy is assessed. I will not describe the mathematics behind orthorectification as admittedly this is well beyond my knowledge base.

Sources of Inaccuracies in Imagery

Many of our clients assume that high-resolution satellite imagery will be “accurate” to begin with, but this is not necessarily the case. To explore this topic, first we need to understand what the word, “accurate,” really means. In some cases, people use this term to refer to the alignment of the imagery they are purchasing with the spatial datasets they have in house. When this is the case, there is no way to assure accurate alignment without spatially registering the multiple layers to each other. Not only can the high resolution imagery we provide have accuracy errors, so too can the base layers a client has in house which can further accentuate the misalignment.

In other cases, the term accuracy can refer to how closely imagery aligns with its real position on the planet. While more modern satellites (such as GeoEye-1 and WorldView-2) have imagery that is closer to its actual position on the planet, the alignment is rarely, if ever, ‘perfect’ without additional processing of the data. These positional inaccuracies are caused by both internal and external factors. Internal factors are those caused by the imaging system itself, and include platform orientation and movement, optical and electrical aberrations and geometric characteristics. External factors will further compound internal ones and include the topography of the area imaged as well as atmospheric refraction. When taken together, internal and external factors can result in small or large positional inaccuracies; and further, accuracy will not be consistent from one image to the next even if it is collected by the same sensor, such as WorldView-2.

Georeferenced Versus Orthorectified Imagery

Now that we understand a bit about the sources of inaccurate data, let’s spend some time on three terms often used to describe satellite imagery: georeferenced, co-registered and orthorectified. Georeferencing is the process of projecting and thereby assigning coordinates (e.g. latitude and longitude) to an image. A georeferenced image has no accuracy guarantee; and while often times there is an accuracy statement for this type of data, it is a global average and not an assurance. In order to assure the horizontal accuracy of an image, it needs to be orthorectified.

keating_left_and_orthoOrthorectification creates a final product whereby each pixel in the image is depicted as if it were collected from directly overhead or as close to this as possible. In the graphic above, you can see a path through the forest going from the northwest to the southeast. On the left is the original image, and on the right is the orthorectified image. In the orthorectified version, you can see that the path is now nearly straight after the influence of topography has been removed from the image. (Graphic Credit: David DiBiase, Penn State University)

Orthorectification is the process of removing internal and external distortions to assign more accurate coordinates to the final image. The goal of orthorectification is to create a final product whereby every pixel in the image is depicted as if it were viewed at nadir (or directly overhead), thereby removing the affects of hills, valleys, etc. on the data. Once data has been orthorectified, you are able to compute distances, areas and directions more accurately from the imagery. As a side note, it is never possible to remove all of the distortion in an image as after all, we display imagery on a flat surface (e.g. a computer monitor or paper) while the world is obviously curved; or put another way, no orthorectified image will be 100% true to its real world position.

Co-registration is the process of matching one (or more) spatial layer(s) to another so they align as closely as possible. It is possible to co-register two or more image files (i.e. raster to raster) to each other, multiple images to multiple vectors (i.e. raster to vector) and even multiple vectors to vectors (i.e. vector to vector). Unless one of the spatial layers used in co-registration has a known accuracy and its position does not shift, there is no way to assure the accuracy of the final product(s) created by this process.

How to Create an Orthorectified Image

Generally speaking, an orthorectified image starts georeferenced. To orthorectify an image, you need at minimum these two items:

  • An elevation model – this is a spatial layer that shows the topography of the ground under the imagery you plan to orthorectify. The preferred format of the elevation layer is a digital terrain model (DTM) whereby human-made features as well as vegetation and other surface features have been removed; accordingly, this is sometimes called a bare earth model.
  • A camera model or rational polynomial coefficients (RPCs)–we will describe both of these items in more detail shortly, but simply stated, the camera model or RPCs describe the positional relationship of the imagery to the ground below when it was collected by the sensor.

In order to have a guaranteed accuracy for orthorectified imagery, ground control points (GCPs) are required. While we will discuss ground control in more detail in upcoming G-FAQs, for now let’s define them as known points on the surface of the planet that can be found in the imagery you plan to orthorectify. When an elevation model, a camera model/RPCs and ground control are taken together, orthorectified data can be extremely accurate–the higher the quality of the DEM and/or GCPs you use, the more accurate the final product can be.

For our visual-learning readers, orthorectification can be pictured in this fashion. High-resolution imagery is akin to a balloon that is stretched over the topography of the planet (i.e. the elevation model) and is tied down at multiple locations with known coordinates (i.e. GCPs). Once this stretching and tying-down process is completed, the balloon is now positioned accurately on the surface of our planet, or it has been orthorectified.

From the graphic and description above, it might be apparent that removing the influence of topography on imagery is one of the most important steps of orthorectification. The effect of topography is to tilt features in an image away from the center of the camera, and this is counter-acted by employing an elevation model in the orthorectification process. Accordingly, orthorectification has a more drastic impact on accuracy in areas of high relief. As a general rule of thumb, when orthorectifying high-resolution imagery, you should use a 10-meter elevation model or better; and in areas with extremely high relief, you might consider a higher resolution elevation model than this. Obviously, this is a general rule of thumb as it can be nearly impossible to find free 10-meter elevation models outside the USA; and creating them can be very costly and take weeks to months to complete.

As mentioned at the outset of this article, the mathematical models used to orthorectify imagery are beyond the scope of this G-FAQ. That said, it is useful to describe two of the more common methods employed in the orthorectification process from a high-level. The most common method is the black-box (or the analytical) model. This method does not look at the specifics of a sensor and/or the collection geometry of the imagery, rather it relies on RPC files (which we will address in more detail in the second part of this G-FAQ) for orthorectification. The advantage of the black-box method is that it is easy to implement as software developers do not have to gather proprietary information (i.e. the camera model) for each sensor.

The second methods for orthorectification are physical-based models which take into account a wide variety of factors influencing the acquisition of imagery. One of the most popular physical-based methods is referred to as the rigorous model or camera model. The rigorous or camera model is based on proprietary information about each sensor that can only be obtained from its owner; as such, many commercial software packages do not include this method. This model takes into account multiple factors not considered in the black-box model including the exact position of the satellite in space when the image was acquired, the sensor’s electronic and optical characteristics as well as atmospheric effects. The advantage of the rigorous model is improved accuracy of the orthorectified image, though my review of the available research suggests the impact is minimal. For example, Dial and Grodecki found less than a 0.1 pixel residual error difference between IKONOS imagery orthorectified by the black-box and rigorous models.

In the second part of this G-FAQ series, we will continue the discussion on orthorectification with a focus on accuracy testing and RPC files.

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

Many of our readers have likely not heard of KOMPSAT-3. If you are one of them, we suggest you think about it for your next project requiring high resolution satellite imagery. And in particular, for those of you who work with vegetation and/or spectral analysis as KOMPSAT-3 is the only multispectral high resolution satellite in the world to collect data in the afternoon. Further, KOMPSAT-3 has the highest data quantization of any satellite on the market.

If you are not familiar with KOMPSAT-3, here is a summary of the key satellite specifications:



70-cm natural color sample images collected by KOMPSAT-3 on August 16, 2013 over Melbourne, Australia. This data has been photo enhanced by Apollo Mapping. Additional samples of color 70-cm KOMPSAT-3 imagery can be found here.
  • Launch Date: May 17, 2012, 16:39 UTC
  • Spectral Bands:
    • Panchromatic
    • 4-band multispectral (blue, green, red and NIR)
  • Sensor Resolution:
    • At nadir–70-cm panchromatic & 2.8-m multispectral
    • 20° off-nadir–82-cm panchromatic & 3.28-m multispectral
    • 30° off-nadir–1.02-m panchromatic & 4.08-m multispectral
    • 45° off-nadir–2.11-m panchromatic & 8.44-m multispectral
  • Dynamic Range: 14-bits
  • Revisit Frequency: (at 40°N)
    • 1.4 days (< 45° off-nadir)
    • 4.1 days (< 20° off-nadir)
  • Mean Local Crossing Time: 13:30 local time (approximate; across lit side of Earth)
  • Footprint Width: 16 km (at nadir)
  • Maximum Collection Geometry:
    • Mono, strip mode–16 km x 4,000 km (1 strip wide)
    • Mono, wide area mode–48 km x 100 km (3 strips wide)
    • Stereo, single pass mode–16 km x 200 km (2 pairs wide)
  • Daily Collection Capacity: 300,000 sq km
  • Georeferenced Horizontal Accuracy: 48.5-m CE90 (global average, dependent on terrain)

Having worked with sample images for the past several weeks, we are impressed with the crispness of KOMPSAT-3 data and its color reproduction. We feel that KOMPSAT-3 separates itself from other high-resolution satellites in two key ways:

(1)  14-bit depth which is important for spectral analysis. With 14-bit depth data, KOMPSAT-3 has a maximum digital number (or pixel value) range of 16,384 units. Compared with the maximum digital number range of 4,096 for Pléiades 1 and then 2,048 for the other high-resolution satellites in orbit now, this is a significant advantage for you remote-sensing academics and professionals out there.

(2)  A 1:30 PM local collection time. All other multispectral high-resolution satellites collect imagery during the mid-morning, so an afternoon collection time can be an advantage in persistently cloudy areas like tropical islands. This is also an advantage for vegetation analysis as chlorophyll concentrations change though out the day; so coupling KOMPSAT-3 with imagery collected during the morning, can give researchers a more complete picture of plant health.

If you are interested in pricing, coverage and/or have any additional questions about KOMPSAT-3 data, please let the Apollo Mapping sales team at sales@apollomapping.com or (303) 993-3863.

Do you send wires to Apollo Mapping? If so, please send us an email at sales@apollomapping.com and we will send you back our new wire transfer details! In the new wire transfer details, you will see there is no longer an intermediary bank which should make things much easier when sending us money.

Thanks to everyone for their continued patronage to Apollo Mapping!