Apollo Mapping is pleased to announce that starting in October, sales of high-resolution satellite imagery from DigitalGlobe’s WorldView-3 commenced! Launched in mid-August, WorldView-3 is the most technologically advanced satellite the world has ever seen, featuring 29 bands of spectral data as well as resolution up to 31-centimeters (cm). For those of you who have not heard of WorldView-3, here is a summary of the its key specifications:

    • Spectral Bands
      • Panchromatic
      • 8-band multispectral (coastal, blue, green, yellow, red, red edge, NIR-1 and NIR-2)
      • 8-band shortwave infrared (SWIR)
      • 12-band CAVIS (corrects for Clouds, Aerosols, Vapors, Ice and Snow)
    • Sensor Resolution
      • At nadir–31-cm panchromatic, 1.24-meter (m) multispectral, 3.7-m SWIR and 30.0-m CAVIS
      • 20° off-nadir–34-cm panchromatic, 1.38-m multispectral, 4.1-m SWIR and ~33-m CAVIS
    • Dynamic Range
      • 11-bits, panchromatic and multispectral)
      • 14-bits, SWIR and CAVIS
    • Footprint Width
      • 13.1 kilometers (km; at nadir)
    • Single Pass Maximum Collection Geometry (at 30° off-nadir)
      • Mono–66.5 km x 112 km (5 strip wide)
      • Stereo–26.6 km x 112 km (2 pairs wide)
    • Daily Collection Capacity
      • 680,000 sq km
    • Georeferenced Horizontal Accuracy
      • < 3.5-m CE90 (global average, dependent on terrain)

Along with the exciting announcement that WorldView-3 sales are to start in October, here are several additional changes to take note of with regards to DigitalGlobe satellite imagery offerings:

Ball Aerospace and Technologies Corporation played an integral role in the construction and launch of DigitalGlobe’s advanced high-resolution satellite, WorldView-3.
      1. There is a new price list available for 30-cm satellite imagery products offered by DigitalGlobe. Please email the Apollo Mapping sales team at sales@apollomappping.com for additional details on these new prices.
      2. 30-cm WorldView-3 products will not be available until Q1 2015. Please check our monthly newsletter, The Geospatial Times, for details on exactly when 30-cm products will be made available.
      3. 40-cm and 50-cm tasking requests for WorldView-3 only will be subject to the new 30-cm resolution pricing table.
      4. New collections at 30-cm resolution will have regional prices dependent on the country that is being tasked. We can tell you more about the regional prices to expect if you email us at sales@apollomappping.com.

If you have any questions about sales of WorldView-3 data and/or the new pricing to take effect for 30-cm DigitalGlobe imagery products, please send us an email at sales@apollomappping.com.

Due to popular demand, significant imagery discounts for DigitalGlobe products are back! We expect these discounts to last till the end of 2014 so now is your time to take advantage of the deal if you missed out last year. In fact, no one has taken advantage of this discount offer yet which is surprising to us given how popular it was in 2013.

As a quick recap, this 50% off offer applies to purchases of 1,000 square kilometers (sq km) of satellite imagery that is older than 18 months, including WorldView-2, QuickBird, GeoEye-1, IKONOS and WorldView-1 data.

If you would like to check for coverage over your area of interest, give our online search engine, Image Hunter, a try. With Image Hunter, you can search for all DigitalGlobe satellite imagery quicker and easier than you can on their own site. It will literally only take a second or two to load all of the search results over your area of interest!

Here are the specifics on this DigitalGlobe imagery discount offer:

  • Discount Offer: 50% off
  • Regional Restrictions: US clients only
  • Minimum Order: 1,000 sq km (across all polygons; at least 25 sq km per polygon)
  • Age Restriction: greater than 18 months old
  • Satellites Offered: WorldView-2, QuickBird, GeoEye-1, IKONOS and WorldView-1
  • Products Offered: georeferenced panchromatic, natural color, 4-band pansharpened/bundle, 8-band bundle and stereo
  • Promotion Dates: now through December 31, 2014
  • Academic discounts still apply

If you would rather we check for coverage over your area of interest(s), no problem! Just send an email with your latitude/longitude coordinates, shapefile or KMZ to sales@apollomapping.com.

Last summer I stayed with friends in Portland, Oregon. They were avid campers so each weekend we would go somewhere new; sometimes it would be car-camping so we could bring coolers full of beer or the canoe, and sometimes we backpacked deep into the thick of it with everything we needed on our backs. On one of the former trips, my friend mentioned that he would be bringing his crab traps to catch crawfish. We spent the weekend dropping pods throughout Timothy Lake on Mt. Hood, going out periodically to reap our bounty and looking forward to the return home to do some southern style cooking with northwestern mud bugs. Well, on our last run to scoop the traps, we came across a few items we didn’t intend to catch, namely an old reel and someone else’s pod. Clearly lost and forgotten items, respectively, we brought them with us and didn’t think much of it.

The study area within BNP with debris removal site locations indicated.
>A progression of hot spot maps which consider benthic habitats, depth, frequency of debris and seagrass locations.

Researchers at the University of Miami (affectionately known as “The U”) set out on a study to look at the dispersal of lobster trap debris in Biscayne National Park (BNP), Florida. They hoped to assess removal efficiency and see how GIS technology could be employed for the sake of trappers’ purse strings and the health of our waters. Through a well-developed literature review, the authors noted that lost or discarded fishing gear can have many negative effects on our waters and marine-life. Not only can these items ensnare marine-life, but their very presence can be detrimental to the structure of ecosystem interactions, as well as have harmful impacts on delicate life-forms such as reefs.

The study was based on existing data compiled over 5 years that tracked debris removal efforts in BNP. In contrast to most nationally protected parks, state law in Florida allows fishing and trapping in the sheltered waterways. Through the use of existing data, accompanied by newly collected data, the researchers created maps of “hot-spots” where trap debris was most likely to accumulate and thus potentially impact marine-life quality.

The new spatial data used in this research was collected by two contractors working in the study area for four weeks collecting debris. One contractor towed divers near the surface, and the other towed divers near the seafloor. The latter method of debris designation and data collection put divers in better contact with accumulated rubbish, and as you would assume, allowed for this contractor’s method of recovery to be more fruitful at nearly two times the efficiency of the surface trawl.

In the researchers’ analysis of existing data, they hypothesized that the amount of debris would be highest during the first attempts at garbage removal from the waterways. However, this did not appear to be the case. It appeared that fishers and trappers were still careless, or unlucky, in regards to their fishing equipment throughout the 5-year study period.

The research team, at the time of the submission for publication, was still in the process of improving and tweaking their spatial model. Their suggestions for improved of debris tracking and recovery included mandatory documentation of the number of traps deployed, trap soak periods and dispersal of traps in relation to preferred lobster habitat locations. The reef hot spot map they created was intended to enhance cleanup efficiency in future efforts, as well as to minimize the impact (and its duration) of lost, abandoned or forgotten traps on marine-life.

Justin Harmon
Staff Writer

Many of our readers have likely not heard of KOMPSAT-3. If you are one of them, we suggest you think about it for your next project requiring high resolution satellite imagery. And in particular, for those of you who work with vegetation and/or spectral analysis as KOMPSAT-3 is the only multispectral high resolution satellite in the world to collect data in the afternoon. Further, KOMPSAT-3 has the highest data quantization of any satellite on the market.

If you are not familiar with KOMPSAT-3, here is a summary of the key satellite specifications:


70-cm natural color sample images collected by KOMPSAT-3 on August 4, 2013 over Rome, Italy. This data has been photo enhanced by Apollo Mapping. Additional samples of color 70-cm KOMPSAT-3 imagery can be found here.
  • Launch Date: May 17, 2012, 16:39 UTC
  • Spectral Bands:
    • Panchromatic
    • 4-band multispectral (blue, green, red and NIR)
  • Sensor Resolution:
    • At nadir–70-cm panchromatic & 2.8-m multispectral
    • 20° off-nadir–82-cm panchromatic & 3.28-m multispectral
    • 30° off-nadir–1.02-m panchromatic & 4.08-m multispectral
    • 45° off-nadir–2.11-m panchromatic & 8.44-m multispectral
  • Dynamic Range: 14-bits
  • Revisit Frequency: (at 40°N)
    • 1.4 days (< 45° off-nadir)
    • 4.1 days (< 20° off-nadir)
  • Mean Local Crossing Time: 13:30 local time (approximate; across lit side of Earth)
  • Footprint Width: 16 km (at nadir)
  • Maximum Collection Geometry:
    • Mono, strip mode–16 km x 4,000 km (1 strip wide)
    • Mono, wide area mode–48 km x 100 km (3 strips wide)
    • Stereo, single pass mode–16 km x 200 km (2 pairs wide)
  • Daily Collection Capacity: 300,000 sq km
  • Georeferenced Horizontal Accuracy: 48.5-m CE90 (global average, dependent on terrain)

Having worked with sample images for the past several weeks, we are impressed with the crispness of KOMPSAT-3 data and its color reproduction. We feel that KOMPSAT-3 separates itself from other high-resolution satellites in two key ways:

(1)  14-bit depth which is important for spectral analysis. With 14-bit depth data, KOMPSAT-3 has a maximum digital number (or pixel value) range of 16,384 units. Compared with the maximum digital number range of 4,096 for Pléiades 1 and then 2,048 for the other high-resolution satellites in orbit now, this is a significant advantage for you remote-sensing academics and professionals out there.

(2)  A 1:30 PM local collection time. All other multispectral high-resolution satellites collect imagery during the mid-morning, so an afternoon collection time can be an advantage in persistently cloudy areas like tropical islands. This is also an advantage for vegetation analysis as chlorophyll concentrations change though out the day; so coupling KOMPSAT-3 with imagery collected during the morning, can give researchers a more complete picture of plant health.

If you are interested in pricing, coverage and/or have any additional questions about KOMPSAT-3 data, please let the Apollo Mapping sales team at sales@apollomapping.com or (303) 993-3863.

I have a friend who did his BS in environmental science and his MS in environmental stewardship. The other day I was at his house having some beers and I asked where I should put the cans and bottles. He told me just to throw them away. I was caught off guard and immediately asked him why he didn’t recycle. He said that recycling is not efficient, and that we put too much effort in to something that reaps little reward. He said he hoped that would change in the future, but that it just wasn’t worth anyone’s time to do so now. Huh. I most certainly didn’t agree with him, but being that he’s a very smart fellow, I thought I’d look into it a bit.

In 2013, CBS ran a report about the perceptions and effects of home-use recycling. According to their study, of the 250 million tons of trash thrown out each year, nearly 85 million tons was diverted from landfills to recycling plants. But still, there are other skeptics out there than just my friend. One person CBS interviewed gave a statistic that is frequently cited: only 5% of waste generated in this country comes from homes, so can individuals really make a difference? New York City officials say yes, and not just environmentally, but financially, too.

The Newby Island Resource Recovery Park in Santa Clara County, California is one of the largest recycling centers in the country. Their green energy facility generates enough renewable energy to power over 3,000 homes a year. 60-cm color image captured by QuickBird on June 19, 2014 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

While NYC has some of the “laziest” recyclers in the country (curious since I just moved back from Texas where you have to drive your recycling to the next town if you want to do your part), in that only 15% of their trash is diverted from landfills as compared to the national average of 34%. The Big Apple’s constituents have made some strides over the last few years, which has saved the City $30 million a year with hopes to double that by 2017. NYC receives $10 per ton of recycled paper which leads to a savings of $86 per ton as compared to a landfill drop of paper. Clearly there’s a different kind of green in that recycling than what you might think.

So maybe my friend didn’t have his ducks in a row with his assertion that recycling wasn’t worth it. Well, hold on. What about plastics? This material makes up (and wraps up) an awful lot of what we consume and therefore much of what we discard. That far-off recycling plant in Texas I referred to only took #1 and #2 plastics because it wasn’t economical for them to take other designations. Plastics differ in the heat they melt at, meaning you can’t commingle them all together. This leads to extra sorting and fuel costs when you have to process different batches of plastic at different temperatures and for different lengths of time. A 2008 Popular Mechanics article reminded us that those plastic containers we’re so fond of are made from petroleum, so therefore have value; but when it comes time to recycling them, we have to consider the cost of transportation and energy. In addition, they reminded us to consider the carbon emissions from the transitional recycling process. Hmm. True.

Well, where does that leave us? Clearly some forms of recycling are worth their weight in gold (pun intended), but others have a ways to go, perhaps. Or more appropriately, we as consumers have a ways to go. Our lifestyle has caused many of us to not think about the consequences of our consumption in many ways; we know there is a recycling bin nearby, so as long as we use it, we’re doing our part, right? Here in Boulder, Colorado, everyone uses their stainless steel or heavy duty glass water bottles and brings their reusable cloth bags to the grocery stores. And that trend can be seen all over the country (even in Texas where I lived for a spell), but what we need to do is be more aware about our uses of other plastics. Not only because of the difficulty and expense of recycling them, but because of the health reasons attached to doing so (which we’ll look at next month).

Justin Harmon
Staff Writer

When I joined Apollo Mapping six weeks ago, I was asked if I wanted to write a brief article for the monthly newsletter and of course I jumped at the chance. As I sat down to come up with ideas, I started thinking about previous opportunities I’ve come across in my brief, but future long-term, GIS and remote sensing related career. One topic in particular stood out for my first article, i.e. monitoring, but more importantly monitoring your competition.

An oil storage facility site imaged on June 25, 2011 by the 50-cm color satellite, WorldView-2. (Image Courtesy: DigitalGlobe)
An image of the same oil storage facility now collected on February 12, 2014 by the 60-cm color satellite, QuickBird. (Image Courtesy: DigitalGlobe)

The term monitoring can mean many things, especially in the geospatial world. Monitoring for some might mean weekly site collections, and for others it might mean collections quarterly or even annually, but in the end, it really depends on your project. I’ve seen projects where the goal was to monitor oil wells for productivity and/or capacity changes; and some to monitoring parking lots to count cars; and still others to monitor ports for estimated shipping volumes.

This brings me to my next point, maybe the true value of monitoring is not just observing your own assets but your competition. Perhaps the true value of the pixels Apollo Mapping offers is understanding what your competitors are doing and not just a pretty picture. For example, your competition could be ramping up productivity by adding oil containers, paving new roads to an existing site or building a new pipeline.

I’ve come across quite a few opportunities very similar to the examples above, and they seem to be growing in number given the value monitoring can provide. Two ideas came to mind when writing this article: the first was the New England Patriots and ‘Spygate,’ which I will not go into here; and the other was a NASCAR race. I’m sure you’re wondering why NASCAR, well the answer is simple! All of the cars in a race have to adhere to the same specifications and policies, yet they all make their pre-race changes behind closed doors. Now imagine if you could see what changes were made, you’d have a leg up on the competition. The value of information is different for every company, but just knowing that you can access imagery can be of great value to making informed business decisions.

With the resolution and revisit time of today’s satellites, the ability to see something on a daily or weekly basis is a reality. And today’s technology allows you options to view one site or one hundred sites depending on what you need.

Here are three ways Apollo Mapping can help you monitor locations:

  1. The Image Hunter Archive–our imagery archive is updated daily with scenes from numerous high to medium resolutions sensors on a global scale. To say that there’s a ton of imagery in Image Hunter is an understatement, with an estimated 5 million square kilometers of high res data ingested on a daily basis. Image Hunter is the most powerful imagery search tools in the industry.
  2. Subscription Services–a Global Basemap Subscription service, and in particular the Basemap + Refresh subscription service, provides an almost yearly refresh of the USA. So if your projects or competitive intel requires yearly collections, this may fit the bill for your organization. Global access subscription services are also available if your organization requires multi-country imagery coverage. These services are accessible via any OGC-compliant software or through a password protected web portal.
  3. Custom Tasking – We can collect imagery just about anywhere on the globe, so if the needs of your project aren’t met with our archive or a subscription service, then we can custom collect areas down to 25 square kilometers. Your custom tasking order can be completed on-time with 3 different levels of priority tasking depending upon the budget of the project. FTP and/or secure portal delivery is available.

Each of these three methods to acquire imagery and monitor sites has its place. To find out which option is best for you, please feel free to reach out to me directly and let’s discuss your project.

Robert O’Munneke
Chief of Sales
(703) 304-6425
Robert@apollomapping.com

Have you checked out the new and improved Image Hunter yet?!?! If not, you should!

Listening to the feedback we received on improving imagery search engines, the new version of Image Hunter features a major overhaul to the user interface as well as to the backend architecture. Image Hunter Version 2 is built on open-source technology so now it works on all computers, not just on Windows machines. We slimmed down the user interface to make it easier to find the imagery filters and other available tools. All things said, we really think you will enjoy your browsing experience with Image Hunter (Version 2).

Key October 2014 Improvements

We made some major strides forward with Image Hunter in October, including the addition of WorldView-3 to the database! During the month, we also implemented a more stable basemap and added a button to search by Catalog ID. We expect exciting improvements in November as well, so stay tuned for more updates!

Image Hunter can be accessed 24 hours a day, 7 days a week and is a one-stop shop for every major source of medium and high-resolution satellite imagery on the market today, including:

  • WorldView-3
  • WorldView-2
  • QuickBird
  • WorldView-1
  • GeoEye-1
  • IKONOS
  • The Pléiades 1 constellation
  • The entire SPOT constellation
  • RapidEye

If any of our readers have struggled with other geospatial search engines that are clunky, only query one data source and/or do not provide image previews, then Image Hunter is the solution to your woes, as it features:

  • Online browsing of satellite imagery from 3 data providers and 15 satellites.
  • Near-instantaneous loading of low resolution preview imagery with collection date, cloud cover and other key metadata.
  • The ability to define your area of interest by address and with coordinates, geometric shape or shapefile/KMZ.
  • A responsive basemap with street names to provide spatial context when discovering data as well as crowd-sourced updates for the most accurate map possible.
  • Exports of the area of interest you create as well as the scenes you select in shapefile or KMZ format.
  • Support for all operating systems, and not just our friends with Windows machines!

The new version of Image Hunter can be accessed here. We are excited to find out what you think about Version 2!

If you have any ideas and/or feedback to improve the new Image Hunter, please let us know at sales@apollomapping.com or (303) 993-3863.