With the US PGA Tour taking its winter break during December, we travel around the globe from China to our home state of Colorado for this stop on the Pléiades 1 Golf Course of the Month. Widely regarded as one of the state’s premier golf courses, The Inverness Golf Club in Englewood, Colorado is located just south of our largest city, Denver. From 1992 to 1997, The Inverness Golf Club was home to one of the state’s best opens, the Colorado Open Championship. Started in 1964, the Colorado Open invites a mixed field of professionals and accomplished amateurs. A minimum of 60 spots are also awarded for the tournament to winning golfers participating in one of the four qualifiers. Played during July each year, the Colorado Open features a purse of $125,000 with up to $5,000 for amateur prizes and a $23,000 pay out to the professional winner.

The Inverness Golf Club is an 18-hole designed by renowned architect, J. Press Maxwell and opened in 1974 (happy 40th birthday!!). Located just south of the Denver Tech Center and a short drive off the major north-south highway in Colorado, I-25, Inverness GC features multiple water hazards and more than 50 sand bunkers. Its fairways are covered with lush Bluegrass and its greens with Bent grass. For championships, the courses plays 7,057 yards long at a total par of 70. The par-3 15th hole is the shortest on the course at 168 yards, though it plays right over a large lake; and the longest is the par-5 16th hole at 575 yards. The signature hole is the par-4, 418-yard 13th with a medium-sized lake golfers must carry over off the tee and then a bunker running down its left side.

If you live in Colorado or visit our amazing state regularly, playing a round at Inverness is a must! While you think about chasing your golf ball across the fairways and greens, sit back and enjoy these 50-cm color Pléiades 1 images of the course.

A 50-cm color image of The Inverness Golf Club in Englewood, Colorado collected on October 3, 2014 by Pléiades 1B. To see this course in 1.5-meter resolution, check out this month’s feature on SPOTMaps. Image photo enhanced by Apollo Mapping. © CNES 2012, Distribution Airbus Defense and Space / Spot Image S.A., France, all rights reserved.

The Pléiades 1 High-Resolution Satellite Constellation

The Pléiades 1 constellation (or at least part of it!) has been in orbit since December 2011 and if you have not had a chance to check out any sample imagery, take a few moments and have a look at the gallery on our website. If you work with high resolution imagery, you should consider Pléiades 1 for your next geospatial project.

A variety of Pléiades 1 products are available from both a growing archive and as a new collection, including 50-centimeter (cm) pansharpened imagery and 50-cm panchromatic–2-meter (m) 4-band multispectral bundles. We are happy to discuss the technical specifications, pricing and tasking options available with this satellite constellation.

Working with Pléiades 1 since the launch of the first twin satellite, P1A, we have noticed that:

  • Airbus Defense and Space is able to deliver on their tasking feasibilities.

The Apollo Mapping sales team can answer any questions you might have about the high resolution satellite constellation, Pléiades 1. We can be reached anytime at (303) 993-3863 or sales@apollomapping.com.

More sample images and technical information about Pléiades 1A and 1B can be found on our website here.

By now, everyone knows about BPA which is scientifically known as bisphenol A. This industrial chemical has been found in numerous forms of epoxy resins and polycarbonate plastics, and has been used since the 1890s. Its link to negative health side effects was first noticed in the 1930s, but not widely reported until 1997. The chemical mimics the effects of estrogen, and several studies have linked prenatal exposure to physical and neurological difficulties later in life. Because of this, and other negative side effects of BPA, most companies have stopped using the chemical, and even have gone as far as to advertise their products as BPA-free. While this is good, it is not the end of the road for the dark side of plastics.

A study done in Sweden recently found that two other chemicals commonly used in plastics, DiNP and DEHP, have been linked to altered genital development in boys while in the womb. There is not much known about DiNP yet, but DEHP is found in common vinyl items such as toys, flooring and packaging. By simply handling these plastic and vinyl items during the course of a mother’s life, she can retain traces of these harmful elements in her system which can be measured in urine samples. While this is somewhat frightening, other studies refute the findings, stating there is not a certain causal link. It may noteworthy that plastics make up 85% of medical equipment, and if there is a link between plastics and negative side effects, this could become a major issue.

One of the three original cancer centers as established by the National Cancer Act of 1971, MD Anderson in Houston, Texas focuses on caring for the person as well as the disease. A documentary titled, “The Art of the Possible,” looks at how health care can change for the better when individuals are treated as people, and not just numbers. 50-cm color image captured by WorldView-2 on January 18, 2014 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.

Industry watchdogs are quick to point out that the benefit of doubt on whether plastics are truly harmful is on their side. If we only focus on BPA, say some, we have to be aware that the chemical has not been eradicated from the market. Many canned foods still come with BPA lined insides to maintain freshness. They also warn that exposing any plastic to heat risks decomposition, allowing chemicals to leach into foods. When in doubt, recycle it; and use glass, stainless steel or porcelain as much as possible.

Plastics also have harmful side effects on our environment. Through the science of respirometry, we all know that that those plastic bags you get at grocery stores take forever to breakdown (maybe as long as several hundred years). Across the nation, anytime we choose to let grocers bag our food for us, we’re typically charged ten cents per bag used. We are also aware of the potential for stray bags to impact wildlife by causing tangles or getting ingested when mistaken as food. So how can we increase our quality of life by abandoning the use of plastics for good?

Some independent stores like in.gredients in Austin, Texas and ZERO market in Boulder, Colorado are leading the charge with zero-waste markets. These stores operate on customers brining in their own bags, bins, jars and bottles (preferably not plastic) in order to reduce waste. As the website for in.gredients states, waste is a human invention. These stores, and others like them, are popping all over the world with the hopes to change how we think about buying, transporting and storing food. By making the move to reusable containers and putting that responsibility on the consumer, there is a chance for real change in how waste accumulates. This trend also leads to smarter consumers who are more conscious about what industries do to us unconsciously; oftentimes putting our sugar and salt laden, over-processed foods in environmentally unfriendly containers that just happen to pose further risks to our health.

Justin Harmon
Staff Writer

In this monthly article, we provide details on updates to Airbus Defense and Space GEO’s SPOTMaps product. SPOTMaps is an orthorectified 2.5-meter (m) and now 1.5-m natural color imagery layer with coverage over more than 110 countries–totaling an impressive 115 million plus square kilometers (sq km). For projects requiring a value-priced basemap better than what 15-m Landsat can offer, there is no other choice than SPOTMaps.


1.5-meter SPOT 6 natural color images collected over Inverness Golf Club, Englewood, Colorado and the surrounding areas on April 11, 2014. If you would like to see this golf course in Pléiades 1 50-cm resolution as a comparison, please click here. © CNES 2012, Distribution Airbus Defense and Space / Spot Image S.A., France, all rights reserved
This map of SPOTMap1.5 coverage shows the regions that have been released as well as those currently in production. An Apollo Mapping representative can provide more details on the specific year ranges used in each mosaic.
This map of SPOTMap2.5 coverage has been color coded to show the collection year which makes up the majority of each mosaic as well as those markets that were added in the final month of production (i.e. August 2013). An Apollo Mapping representative can provide more details on the specific year ranges used in each mosaic.

SPOTMaps Product Updates–November 2014

  • 22 million sq km of SPOTMap1.5 coverage is to be released in 2014 alone!
  • These countries are currently in production and will be added to the SPOTMaps1.5 database soon:
    • Algeria (part of the country)
    • Australia (part of the country)
    • Botswana
    • Egypt (part of the country)
    • Israel and the Occupied Territories
    • Jordan
    • Lebanon
    • Libya (part of the country)
    • Mauritania (part of the country)
    • Senegal
  • Production of SPOTMaps2.5 is complete now that SPOTMaps1.5 are being released.

For those who have never worked with SPOTMaps, below is a summary of key product specifications of the 1.5-m and 2.5-m versions as well as product differentiators.

Key Product Specifications

  • SPOTMaps1.5
    • Resolution: 1.5-m
    • Spectral Bands: true natural color (RGB)
    • Horizontal Accuracy: 6 to 10-m CE90 (circular error 90%)
    • Projection/Datum: UTM WGS84
    • Source Data: SPOT6/7 satellite imagery
    • File Format: GeoTIFF
  • SPOTMaps2.5
    • Resolution: 2.5-m
    • Spectral Bands: simulated natural color (RGB)
    • Horizontal Accuracy: 10 to 15-m RMSE (root mean square error)
    • Projection/Datum: UTM WGS84
    • Source Data: SPOT5 satellite imagery
    • File Format: GeoTIFF

Product Differentiators

  • Recent and ready for immediate delivery and integration with your GIS
  • Seamless, orthorectified coverage across countries and entire regions in 1.5-m and 2.5-m resolution
  • Suitable for work up to 1:10,000 scale
  • Custom product framing with minimum orders of ~100 sq km
  • Product series is updated nearly every month
  • Source data can be delivered with all SPOTMaps mosaics
  • Volume and academic discounts are offered
  • Multi-user licenses are available

If you would like pricing details and/or additional product details, such as date ranges and accuracy specifications, please let us know at sales@apollomapping.com or (303) 993-3863.

Okay, so I know we have all had the experience of installing a freeware program and along with it seven smaller programs are added to your computer. And then what if one of those smaller add-on programs is causing issues on your computer and no matter what, you cannot uninstall it?!

Well, I ran into this situation recently when I tried to update a program and along with it came the annoying browser toolbar, AVG SafeGuard. No matter what I tried, AVG was one persistent program! I tried the normal uninstall application included with Windows 7–and no luck. Then I tried a number of online solutions that involved manually deleting files from the C: drive as well as my registry–and again, nothing! Finally, I broke down and tried a few programs that promised they could uninstall AVG, but again no success, ugh.

I was about to give up and just deal with toolbar, when I ran across Revo Uninstaller Pro. Revo offers a free 30-day trial period and then costs about $40 to continue using it. So I installed the 30-day trial and boom, within minutes AVG Toolbar was gone and my computer was running smoothly again.

A huge thanks goes out to the developers of Revo Uninstaller–hopefully this short piece gives you some well deserved attention!

Until my next edition of the Free For All, happy hunting for free geospatial goodies!

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

In last month’s edition of the Geospatial Frequently Asked Question (G-FAQ), we started our discussion on ground control points (GCPs) and their relationship to orthorectification. Specifically, our focus was on determine the number of GCPs required to create an accurate orthoimage and then selecting the locations for these points. In this edition of the G-FAQ, we conclude the discussion of GCPs by offering tips on collecting them in the field, recording metadata about each and then applying them to your orthoimage.

As a quick reminder, our focus in this two-part G-FAQ edition is on these questions:

What are ground control points and how do they improve the accuracy of high resolution satellite imagery? How do I decide on the number required and the locations of these ground control points? What best practices should I follow in the field when collecting ground control points?

In the October edition of the G-FAQ, we learned that ground control points are locations on the planet with a precisely known X, Y and Z position. When these control points are photo identifiable in high resolution imagery, they can be used to improve the data’s accuracy through orthorectification. Starting in August, we discussed the basics (and some of the nuances) of orthorectification, you can read more about the process here. In last month’s G-FAQ, I introduced an equation to help you determine the number of GCPs required for orthorectification and also looked at the ideal distribution of these points. This month, we pick up the discussion with a focus on collecting GCPs and then applying them to your raw high-resolution imagery.

CPT_SS06_2008_N
CPT_SS06_2008_S
CPT_SS06_2008_W
CPT_SS05_SS06_2008_Box_3A series of images and photos that are good examples of the overhead imagery view and then on-the-ground photo views that should be recorded for each GCP surveyed. This is a NOAA control point collected around Cleburne Municipal Airport, Texas. The surveyor who recorded this GCP took three photos of the location from the north, south and west to illustrate the location of the point. And then on the three images, you can see a label added that uses the unique GCP ID number as well as indicates the direction the photo was taken (i.e. N = north; S = south; etc.). There is also an accompanying screengrab of the high resolution imagery with the location of the GCP indicated. (Photos and Map Credit: NOAA)

Step 3–Collecting Ground Control Points in the Field

Now that you have determined the number of GCPs required and their general locations, it is time to head out into the field to collect this data! Here is a check list to be sure you are ready for your trip out to the field and then some advice on what to do once you get there.

  • First things first, it is time to pack your gear for the field. Here are some items you will want to be sure are included in your backpack:(1)  A differential GPS unit or conventional surveying equipment. Whatever you chose, be sure it can achieve accuracies equal to half the imagery’s pixel size or better.

    (2)  A tripod for the GPS unit (or surveying equipment) with a precisely measured height to the bottom of the GPS while it is locked on the tripod. Be sure to record this height in a safe place as you will need the information later.

    (3)  A camera to take photos of the GPS-tripod in position, collecting control data.

    (4)  Back up batteries or alternative power sources for the GPS unit and camera.

    (5)  A laptop with the screengrabs of the approximate GCPs locations loaded on it as well as a copy of the raw imagery files.

    (6)  A premade document on the laptop to record the position information (i.e. X, Y and Z coordinates) reported by the GPS unit. We will discuss the format for this positional information in more depth below.

  • Now let’s move to some tips for working in the field to collect GCPs. First and foremost, whatever you do, your safety is the number one concern! If you have selected GCPs that are on private grounds, be sure to request permission before you enter their lands. And if you have selected locations for GCPs that are unsafe when you get to the field, chose an alternate location that is safe (see some tips below on changing the location of GCP sites).
  • When you have decided on the final location for each of your GCPs, set your tripod and GPS unit in place and let it get a lock on the number of satellites it needs to achieve the accuracy you desire. While you are waiting on the GPS unit to lock its position in, you will need to take at least two photos of each GCP. And be sure to take photos of the GPS unit-tripod from different angles. These photos will be crucial when you get back into your office and try to relate each GCP to the exact pixel it represents in your imagery.
  • If you do change GCP locations in the field, it is a good idea to mark an imagery screengrab with the new position. If the new locations are not on the original set of screengrabs you made, create a new screengrab(s) and mark the new GCP site(s).
  • In order to keep your GCPs organized, it is a good idea to create a spreadsheet to record the metadata on each control point you survey. Here are the items we suggest you add to the spreadsheet:(1)  The model and number of the tripod, GPS unit and/or surveying equipment used.

    (2)  A point identification number.

    (3)  The X, Y and Z coordinates of the point.

    (4)  The projection (i.e. datum, coordinate system and units) used to survey the GCP.

    (5)  The estimated error or XYZ covariance matrix for each point.

    (6)  Written description of the general location of each point.

    (7)  Additional notes including details on how photos and imagery screengrabs of each point are named.

    If you would like to use a spreadsheet I created, you can download it here.

Step 4–Applying Your Ground Control Points to Imagery

Now that you have collected your set of GCPs, it is time to get back into the office and apply them in the orthorectification process. In short, what you need to do is locate the exact pixel that each of your GCPs relates to–that is why the photos you took in the field are so important. As you find this exact pixel and apply GCPs, be sure look at the RMS error (sometimes called residuals) of each point you add as one bad point could degrade the accuracy of the final product. Keep in mind that residuals are computed on a global best fit basis so a point with a high residual might not actually be bad. It might just be isolated as isolated GCPs often have higher residuals than will clustered GCPs. If possible, having a final residual value smaller than your pixel size is the goal. And one final word to the wise with regards to GCPs, if you can, be sure to leave out several points to test the accuracy of the final orthoimage you have created.

Well, that brings us to the end of our discussion of orthorectification and ground control points. Hopefully you learned a bit along the way in this four part discussion!

Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.

Find Out More About This Topic Here

Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com

With the start of commercial WorldView-3 imagery sales in October, we were able to get our hands on some full resolution 40-cm color over Barcelona, Spain. And to say we were blown away with the quality of the data is an understatement!!

Without a doubt, this is the highest quality satellite imagery available on the market. Even at 40-cm resolution, this data rivals the clarity and detail you can see in 30-cm aerial imagery given how exact the optics on WorldView-3 are. And then, there are the colors, do not even get me started–they look as natural and realistic as anything we have ever seen!

Here are some thoughts about WorldView-3 data after having a chance to preview the 40-cm color imagery of Barcelona provided to us by DigitalGlobe:

  1. The level of detail seen in 40-cm color WorldView-3 imagery cannot be rivaled by any commercial satellite on the market.
  2. You are able to resolve new features never seen in satellite imagery before, including thin structural beams, pipes and even roof top heating/cooling units. We expect these features to be even more apparent when 30-cm WorldView-3 data is available starting Q1 2015.
  3. The saturation and vibrance of color WorldView-3 imagery is absolutely incredible. It’s only close rival is color imagery from its older sibling, WorldView-2!
  4. Without a question, we recommend having all WorldView-3 data produced at 40-cm resolution.

Additional details about WorldView-3 can be found on our website here.

If you have any specific projects where you think WorldView-3 would be the ideal solution, let us know by email at sales@apollomapping.com.

In this 40-cm color image of El Prat Airport in Barcelona, Spain, check out how vivid the teal color on the runway is; as well as the crispness of the lettering and the heating/cooling units on the rooftop of the terminal. This WorldView-3 data was collected on October 3, 2014 and comes courtesy of DigitalGlobe.
This 40-cm WorldVIew-3 image of Camp Nou, home of FC Barcelona, shows the rows between seats as well as thin structural beams on the upper west side of the stadium. You can even see the pedestrian ramps on the south side of the stadium. This 40-cm WorldView-3 data was collected on October 3, 2014 and comes courtesy of DigitalGlobe.
Check out the people on the tennis courts as well as the poolside furniture you can see here in the 40-cm WorldView-3 image of western Barcelona. This color WorldView-3 data was collected on October 3, 2014 and comes courtesy of DigitalGlobe.
The green and red roofs of the industrial buildings here are as intensely colored as we have ever seen in satellite imagery. Also, check out how clear the thin structural beams and the yard of small industrial objects in the south-west of the image are. This 40-cm WorldView-3 data of Barcelona, Spain was collected on October 3, 2014 and comes courtesy of DigitalGlobe.
Ohhhh, the beach! You can see beach furniture riddling the coast next to the water as well as details never seen before on boats in satellite imagery. This serene ocean view of Barcelona was collected on October 3, 2014 by the satellite, WorldView-3, and comes courtesy of DigitalGlobe.

Do you have the need for regularly updated images of locations around the world?

Perhaps you need imagery to integrate with an OEM solution you are developing?

Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?

If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s Global Basemap (GBM).

With Global Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of GBM is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.

October 2014 Global Basemap Product Update

In the last few months, we’ve talked about updates to the Refresh USA GBM product. But as DigitalGlobe Basemap has a global scope, this month we highlight some of the updates being done in the rest of the world to keep its content the freshest and most valued source of truth about our changing planet.

Over the past few weeks and months, DigitalGlobe added beautiful, color balanced mosaics of over 50 metro areas to GBM. The focus this time was on Europe and Northern Africa, including cities such as: Benghazi, Libya; Copenhagen, Denmark; Kiev, Ukraine; Marrakesh, Morocco; Minsk, Belarus; Paris, France; Prague, Czech Republic; and Zaragoza, Spain.

In addition to these beautiful metros, DigitalGlobe added timely imagery over every continent on Earth, increasing the overall currency of the GBM database.

A coverage map showing available color Global Basemap imagery over South America by location and date.

Global Basemap Product Specifications

– Geographic Regions Covered: defined area of interest, country-level or global

– Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 60-cm for other delivery mechanisms

– Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial

– Database Update Frequency:  annual, semi-annual, quarterly or daily (for Refresh 2.0 only); updates are to limited portions of the database, not the entire database

– Data Accuracy: 8.5-meter CE90%

– Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal

– Pricing Model: transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)

– Subscription Term: annual

For more information on the pricing and coverage available in Global Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.