Many of our readers have likely not heard of KOMPSAT-3. If you are one of them, we suggest you think about it for your next project requiring high resolution satellite imagery. And in particular, for those of you who work with vegetation and/or spectral analysis as KOMPSAT-3 is the only multispectral high resolution satellite in the world to collect data in the afternoon. Further, KOMPSAT-3 has the highest data quantization of any satellite on the market.
If you are not familiar with KOMPSAT-3, here is a summary of the key satellite specifications:

70-cm natural color sample images collected by KOMPSAT-3 on July 8, 2014 over Santiago, Chile. This data has been photo enhanced by Apollo Mapping. Additional samples of color 70-cm KOMPSAT-3 imagery can be found here.- Launch Date: May 17, 2012, 16:39 UTC
- Spectral Bands:
- Panchromatic
- 4-band multispectral (blue, green, red and NIR)
- Sensor Resolution:
- At nadir–70-cm panchromatic & 2.8-m multispectral
- 20° off-nadir–82-cm panchromatic & 3.28-m multispectral
- 30° off-nadir–1.02-m panchromatic & 4.08-m multispectral
- 45° off-nadir–2.11-m panchromatic & 8.44-m multispectral
- Dynamic Range: 14-bits
- Revisit Frequency: (at 40°N)
- 1.4 days (< 45° off-nadir)
- 4.1 days (< 20° off-nadir)
- Mean Local Crossing Time: 13:30 local time (approximate; across lit side of Earth)
- Footprint Width: 16 km (at nadir)
- Maximum Collection Geometry:
- Mono, strip mode–16 km x 4,000 km (1 strip wide)
- Mono, wide area mode–48 km x 100 km (3 strips wide)
- Stereo, single pass mode–16 km x 200 km (2 pairs wide)
- Daily Collection Capacity: 300,000 sq km
- Georeferenced Horizontal Accuracy: 48.5-m CE90 (global average, dependent on terrain)
Having worked with sample images for the past several weeks, we are impressed with the crispness of KOMPSAT-3 data and its color reproduction. We feel that KOMPSAT-3 separates itself from other high-resolution satellites in two key ways:
(1) 14-bit depth which is important for spectral analysis. With 14-bit depth data, KOMPSAT-3 has a maximum digital number (or pixel value) range of 16,384 units. Compared with the maximum digital number range of 4,096 for Pléiades 1 and then 2,048 for the other high-resolution satellites in orbit now, this is a significant advantage for you remote-sensing academics and professionals out there.
(2) A 1:30 PM local collection time. All other multispectral high-resolution satellites collect imagery during the mid-morning, so an afternoon collection time can be an advantage in persistently cloudy areas like tropical islands. This is also an advantage for vegetation analysis as chlorophyll concentrations change though out the day; so coupling KOMPSAT-3 with imagery collected during the morning, can give researchers a more complete picture of plant health.
If you are interested in pricing, coverage and/or have any additional questions about KOMPSAT-3 data, please let the Apollo Mapping sales team at sales@apollomapping.com or (303) 993-3863.
I was back in my native Illinois for the holidays and I was overwhelmed by the number of potholes on all the city streets. Sure, the state has been hemorrhaging money forever, so there likely isn’t enough cash to go around to attend to minor infrastructure issues, but as we drove around I just couldn’t help but cringe at the damage the potholes must inflict on cars, shocks, struts, tires, wheels and gas mileage to boot. But I also thought there must be a high degree of energy transmission between the give and take of the automobile and the porous road, and wondered how that energy could be harnessed.
This pothole at Archbald Pothole State Park in Pennsylvania would ruin any driver’s day. 50-cm color image captured March 15, 2012 by WV-2 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.Well, I’m no genius, if you’ve read this series before, you know that. So of course people have been thinking about this idea for years. Graduate students from M.I.T. helped create a shock, called GenShock, several years ago that not only helps to smooth a ride but can also partially power a car. The school partnered with Levant Power Corporation and the prototypes were used in military vehicles. Their test runs yielded a 3-10% bump in fuel efficiency in vehicles that initially averaged 40 mpg.
Potholes are notoriously hard on vehicles. When a car strikes one, it causes it to move both vertically and horizontally, thus resulting in a loss of energy from the original forward trajectory. Aside from that, the devil’s holes can wreak havoc in other ways. Harsh winter weather leads to the use of heavy machinery with plows and abrasive materials used to fight ice; all of which drastically effect road conditions and stimulate road damage, leading to potholes. In the especially hard winter of 2014, Time magazine reported that there were 1,100 claims in one week alone in Chicago for damage to vehicles from the potholes. Citizen drivers have the right to file these claims across the country, but mostly they are rejected. It is noted that municipalities are responsible for the upkeep of the roads, so maybe there should be more impetus put on how money is spent for repairs and pothole prevention. I imagine the estimates for lost earnings and unnecessary expenses due to vehicular damage are astounding.
Chicago itself has a policy of paying up to $2,000 per claim, but not more than half. It is written that the driver bears some responsibility in avoiding the potholes to begin with. In 2013, Chicago paid off 754 claims at an average of $240 per claimant, making the city look generous compared to other locales such as Colorado Springs, Colorado who rejected 98%. When you think of all the infrastructure issues in this country we now face, it bodes that potholes would be lowest on the list of priorities.
And while the technology for shocks and struts that can absorb impact and transfer energy are up and running, though far from perfect and widely available, it gives us hope for yielding gains from these pesky bumps in the road. For now, steer clear; as if we need one more thing to look out for in our fast-paced lives.
Justin Harmon
Staff Writer
Do you have the need for regularly updated images of locations around the world?
Perhaps you need imagery to integrate with an OEM solution you are developing?
Or maybe your organization uses large amounts of high-resolution imagery each year, and you are seeking a low-cost option for this data?
If you answered yes to any or all of these questions, then the solution you are looking for is DigitalGlobe’s Global Basemap (GBM).
With Global Basemap, you have access to millions of square kilometers of imagery with low cloud-cover and off-nadir angles. This data is accessible in streaming web-mapping services as well as through an online viewer. And perhaps the most important feature of GBM is the regular updates you can receive as out-dated imagery is often of little or no use to our valued clients.
January 2015 Global Basemap Product Update
This month we introduce a new product, Basemap +Vivid, to our regular readers of this update on DigitalGlobe’s GBM service. This new offering of full country (or regional in some cases) coverage is the most beautiful, high-resolution basemap available anywhere. Adjusted for details like optimal contrast, tonal blending and season, the result is a product with unrivalled consistency, completeness and visual appeal.
Powered by DigitalGlobe’s proprietary image processing techniques and unrivaled high-resolution imagery archive, Basemap +Vivid provides the highest visual quality imagery basemap. Basemap +Vivid is offered over large areas of interest, usually at the country level.
DigitalGlobe is aggressively building out global coverage of the Basemap +Vivid product. Today, there are a total of 63 countries available off-the-shelf, each ready for both online or offline delivery, including:
- Argentina
- Australia
- Pakistan
- Saudi Arabia
- South Africa
By the end of Q1 2015, Japan, North Korea, South Korea, Kazakhstan and the entire continent of Africa will be added to the Basemap +Vivid database. In Q2 2015, DigitalGlobe will complete India and build out partial coverage of China. To find out more about Basemap +Vivid, please check out our new monthly piece on this product here.
A coverage map showing available color Global Basemap imagery over Sub-Saharan Africa by location and the most recent coverage date. In many locations, there will multiple imagery dates available.Global Basemap Product Specifications
- Geographic Regions Covered: defined area of interest, country-level or global
- Maximum Imagery Resolution: 50-centimeters through WMS and WCS; 60-cm for other delivery mechanisms
- Data Sources: primary = WorldView-2 and GeoEye-1; secondary = QuickBird, IKONOS, WorldView-1 and aerial
- Database Update Frequency: annual, semi-annual, quarterly or daily (for Refresh 2.0 only); updates are to limited portions of the database, not the entire database
- Data Accuracy: 8.5-meter CE90%
- Database Access: OGC streaming services (i.e. WMS, WMST, WCS and WFS), Google Earth streaming services (i.e. EarthService), ArcGIS plugin (i.e. ImageConnect), offline database and online portal
- Pricing Model: transactional and unlimited tiered subscriptions based on geography and number of users (with uplifts for more frequent updates and imagery downloads)
- Subscription Term: annual
For more information on the pricing and coverage available in Global Basemap, you can reach our sales team anytime at sales@apollomapping.com or during typical business hours at (303) 993-3863.
This map shows the areas imaged by the Pléiades 1 constellation from December 1 to December 31, 2014 over South America and the near coastal islands. Please note that in many instances, multiple images were collected over the same area which is difficult to portray on this static map.In this monthly piece, we give our readers a sense of the high-resolution imagery coverage collected over a geography during a specified window. To do this, we pick a high resolution satellite, a defined time period and area of interest, then report key statistics on the total amount of imagery collected in square kilometers (sq km). Without further delay, let’s jump into our analysis.
Graphic Region of Interest: South America and the near coastal islands
Land Mass Covered: 17,688,056.9 sq km
Time Period: December 1 to December 31, 2014
High Resolution Satellite Constellation: Pléiades 1A + 1B
Pléiades 1 Constellation Imaging Statistics–South America
Total Area Collected: 1,215,144.7 sq km; 19,599.1 sq km per satellite/per day
Area Collected @ 20% or Less Clouds & 30 Degrees Off-Nadir: 227,391.9 sq km; 3,667.6 sq km per satellite/per day; 18.71% of total
Those faithful readers of Small World know that we changed things up recently. Because we’re heavily committed to academia and the use of GIS tools in the classroom, the focus of this article series switched from sister cities to college campuses bound by one random thing or another. When we moved away from the original format it landed us in Ann Arbor, Michigan, home to a University with a football problem. I (erroneously) speculated that they would solve their problems by going back to the ‘well’ (and they did, just a different well) to hire one of their own. So we traveled to Baton Rouge, Louisiana, home to a school with a pretty sturdy football program, the LSU Tigers. Well, I was wrong, and now that particular connection between those two schools is lost (though I’m sure there are hundreds of others), we’ll try to right the ship and make some logical jumps from here on out (hopefully).
There was reason to party inside the stadium at Vaught-Hemingway this year. The Rebels have started producing teams competitive in the powerful SEC. 50-cm color image captured November14, 2014 by WV-2 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.As I write this article, we are in the days between the first Division I-A (FBS for you PC newcomers) semifinals and the first “championship” game (don’t get me started on why it really isn’t). So, you might say, we must be getting ready to hear about Ohio State or the Quack Attack’s hometowns, right? Nope, that might make too much sense. We’re going to keep it Southern and talk about the next football season.
The frequently touted heavyweight conference known as the SEC had a rough go, especially in the West, this bowl season, going just two for seven in their postseason affairs. Two particularly large butt whoopings came in the “New Year’s Six” games on December 31 to Mississippi State and Ole Miss. Earlier in the season the two were undefeated and in the top five. The Magnolia State had dug itself up from the trenches of forgotten programs and made names for themselves. Well, what have you done for us lately?
Since I got us off track and ended up on the campus of LSU, I’m going to get things back on line. An obvious (and one last football connection for this season) link is to a fellow school in the aforementioned fading glory (for now) football conference of the SEC: Ole Miss. The two schools home states have many similarities, one of them being a shared state flower, the magnolia. The two squads first met on the gridiron in 1894, and have met annually since 1945. It wasn’t until 2008 that the rivalry was given an official name, the Magnolia Bowl, most likely to keep up with all the other nicknamed rivalries and conference trophies that dot the country. It was at its height in the ‘50s and ‘60s, and died down considerably after for a few decades largely due to a slip in play quality by the Rebels. It appears that Ole Miss is once again pointed in the right direction, so maybe it will be a game to watch every season. We’ll find out next Fall.
The best tailgating in the world is between these trees. Ole Miss also ranks tops in the best looking coeds. Just sayin’. 40-cm color image captured November14, 2014 by WV-3 and comes courtesy of DigitalGlobe. Photo enhanced by Apollo Mapping.The University of Mississippi, better known as Ole Miss (or just Mississippi if you’re a State fan), was founded in 1848. Its alias came about just before the turn to the 20th Century when the school solicited name ideas for its yearbook. One student submitted Ole Miss, and though it wasn’t adopted for the year in review, it was informally so for the school itself. A University, and a region, steeped in history, tradition and some unfortunate accounts (See ESPN’s 30 for 30 series, Ghosts of Ole Miss for more on that topic), it is known for many things–parties and debutantes to name just a few. I had the privilege of attending a party (and football game) at The Grove when the football team wasn’t quite what they are today, and it was something. Ten acres of splendid wooded cover and green pastures that are decked out delicately and extravagantly the night before each home game. Evening gowns and jackets preferred, chandeliers in pop-up tents and open-invites to strangers to come and party, The Grove is quite the site. The Walk of Champions, another tradition rich in pageantry, occurs every Saturday when the Rebels are at home. The team walks through The Grove on their way to Vaught-Hemingway Stadium on the brick path that splits the heralded grounds in two. When I was there the common saying was, “We might not win every football game, but we will win every party.” They proved that to be so on that Saturday.
Ole Miss is more than extravagant parties (I better not leave out the Square in downtown Oxford!); it is also home to some legendary literary figures such as William Faulkner and John Grisham. But what it is most known for to people outside of Oxford is the rich southern culture associated with fall Saturdays. Football means a lot to this school, even if they haven’t always fielded the best teams. In fact, their patriarch of the gridiron, Archie Manning and his prodigal son Eli both receive highest regards in this idyllic little town. So much so that the speed limits on campus is 18 mph; the jersey number of Archie when he roamed the fields in the late 1960s.
Justin Harmon
Staff Writer
A 2.5-meter simulated natural color SPOT 5 image collected over Barcelona, Spain. © CNES 2012, Distribution Airbus Defense and Space / Spot Image S.A., France, all rights reservedStarting immediately, we are pleased to announce new per square kilometer pricing for all SPOT 1 to 5 imagery products. In the past, these medium resolution datasets where priced by the entire scene, or a fixed portion of a scene in the case of SPOT 5. This new pricing will lower prices for our valued clients as well as speed up the quotation process.
We are also pleased to announce that starting immediately, the academic discount on all SPOT 1 to 7 products–including SPOTMaps and archived plus tasked stereo and mono imagery–is now 50% off! That is significant savings for our valued academic clients.
If you are interested in finding out more about these new SPOT 1 to 5 prices or in placing a new academic order, please let us know by email at sales@apollomapping.com.
You can also find technical specifications of these satellites on our website here.
Have you ever loaded two files into ArcGIS with different projections yet they still lined up? I am guessing all of you will say yes as this is one of ArcGIS’ best features, albeit it rather seamless and hidden. The automated feature that lines up these various spatial layers is called, projecting (or re-projecting) on the fly, and will be the focus of this month’s Geospatial Frequently Asked Question (G-FAQ). Similar to the last few months of the G-FAQ, I will start off with a short explanation of the topic followed by a tutorial video.
In this G-FAQ, we will focus on answering the following set of core questions:
What is projecting on the fly and how does it line up my spatial layers? When might projecting on the fly fail? Are there any special considerations to working with datasets that have been projected on the fly?
In the distant past, ArcGIS did not have the ability to line up spatial layers, including vectors and rasters, that were loaded if their projections differed. When I say that spatial layers with different projections would not line up, here is an example. If you loaded a color raster image file with a WGS84 datum and geographic coordinates; then loaded a parcel layer from the same location with a WGS84 datum but UTM coordinates, the vector file would not appear over top the raster imagery. Rather, the two files would look to occupy different geographic spaces even though they are indeed from the same location. While I am not 100% sure when on the fly projections were added, they have been a part of the software since version 9.0 at least.
So then, projecting data on the fly is a feature that is rather seamlessly done by ArcGIS where by the data frame of your current session assumes the projection of the first file you load. In the example above then, since we loaded the raster imagery first, the data frame would assume a geographic WGS84 projection. And then when the second file is loaded, it is automatically re-projected from UTM WGS84 to match the Geographic WGS84 projection of the data frame and the first spatial file. This on the fly projection continues as more and more spatial layers are loaded into the same ArcGIS session. It is important to note that files transformed on the fly are done so in memory only so that the original file remains unaffected.
On the fly projections only work when each of the spatial layers has metadata defining the datum and coordinate system (i.e. its projection, see this past GFAQ for more details on this topic). Returning to the example above, if the first layer we loaded, i.e. the raster, was not projected (see the link above to determine if a dataset is projected), then the data frame would not assume any projection. And similarly, if the second spatial file we loaded was not projected but the first layer was, then on the fly projection would fail and the layers would not line up.
While on the fly projections are a huge time saver, there are some points that need to be considered so as to avoid errors:
- Loading projected layers in a different order can cause slightly different alignment (or misalignment) as well as change the look and feel of the session as the data frame assumes the first projection and then reprojects subsequent layers to this.
- In some cases, ArcGIS will make assumptions about a spatial layer even if it is missing projection metadata. This is often the case with geographic coordinates whereby Arc will assume a WGS84 datum which may or may not be correct.
- If a subsequent file is loaded with a datum that does not match that of the data frame, ArcGIS will throw up a warning that a geographic transformation (see this GFAQ for more details on transformations) is required and will typically choose the best option. It is important to note that the mathematics required for this geographic transformation are only an approximation for processing speed. If a precise transformation is required, you will need to use the toolbox functions Project (for vectors) or Project Raster to change the actual source file.
- You can check the Data Frame properties to determine what on the fly projection has been set by right-clicking on Layers in the Table of Contents.
- On the fly projections should only be used for visual display of data. You should never make area or distance calculations off of on the fly reprojected data given the mathematical approximations stated above. If you need to make these calculations, you should reproject all of the source files into the same projection with the toolbox functions mentioned above.
Now that we have set the stage for on the fly projections, it is time to spend a few minutes on a visual review of this topic in the video tutorial you will find here.
This seven minute or so tutorial video explains many of the points made above (plus a few additional quirks) but in a visual fashion. Hopefully you will see and hear a few tidbits you did not know before!
Do you have an idea for a future G-FAQ? If so, let me know by email at brock@apollomapping.com.
Find Out More About This Topic Here
- Harvard University–Why Don’t My Layers Line Up?
- Hunter College–What is a Datum Transformation?
- Rice University–Introduction to Coordinate Systems and Projections
- Texas A&M University–Lab Assignment 04: Map Projections
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com



Here are four gorgeous WV3 images collected over Santiago, Chile. In these samples, you can see the unrivaled clarity and color saturation that WorldView-3 can provide. These 40-cm color images were collected on October 11, 2014 and have been photo enhanced by Apollo Mapping. (Images Courtesy: DigitalGlobe)Every time we look at WorldView-3 (WV3) imagery, we are blown away. So we have decided to make this article a monthly feature for the viewing joy of our valued readers. This month, we feature four color 40-cm WV3 images collected over Santiago, Chile.
If you have not heard of the recently-launched satellite, WorldView-3, here are the features that really set it apart from the competition:
- Improved Resolution
- Higher resolution means you can see more detail in WV3 imagery.
- Data collected at nadir will have 31-centimeter (cm) panchromatic, 1.24-meter (m) visible and near infrared, 3.7-m short-wave infrared and 30-m CAVIS bands.
- At 20 degrees off-nadir, the resolution is 34-cm panchromatic, 1.38-m visible and near infrared and 4.1-m short-wave infrared.
- With the easing of US government regulations, we will be able to provide WV3 imagery at a maximum of 30-cm resolution during Q1 2015.
- Additional Spectral Bands
- If spectral analysis is part of your project, then no other satellite can match WV3 with its: 8 bands of visible and near-infrared data; 8 shortwave infrared bands which are crucial for geological studies; and 12 CAVIS bands to detect water vapor, dissolved aerosols, snow, clouds and more.
- Better Positional Accuracy
- With accuracies of 3.5-m CE90% or better (without ground control even!), WV3 has no rivals for its enhanced positional accuracy.
- Daily Revisits
- At 40 degrees latitude, WV3 will be able to image each location daily with 1-meter or better resolution and then every 4.5 days at 34-cm resolution or better.
- Increased Collection Capacity
- WV3 features a 13.1-km swath width (at nadir) with the ability to collect up to 680,000 square kilometer (sq km) of high-resolution data per day.
- Improved control movement gyros translate into larger maximum contiguous collection areas per pass, with up to ~7,500 sq km of mono imagery and ~3,000 sq km of stereo possible.
If you are interested in WorldView-3 imagery for your next project, please let us know by phone, 303-993-3863, or by email, sales@apollomapping.com.