We love maps.
We love imagery.
We love work breaks.
We hope you like them as well!
It’s March already, is that snow all melted yet? I hope so–but before you go outside and check for sure, take a few minutes to peruse the satellite image included in this article. Originally, it was our goal to feature opposing images of the 2017 Presidential Inauguration and subsequent Women’s March in Washington DC; however Mother Nature did not agree with our plan as she scheduled thick clouds for both days. So instead, this month we feature a 50-centimer WorldView-2 image collected over the Women’s March in Denver, Colorado collected at approximately 11:09 AM local time on January 21, 2017. And while the winter months are difficult to capture images during given the low elevation of the Sun in the sky, you can still see the massive crowds that gathered in Civic Park as well as marched through the streets of Denver.
Have a great rest of your workday!
(Images Courtesy: DigitalGlobe. Processed by Apollo Mapping for improved color accuracy and clarity.)
When I heard that NASA was having a press release about a new exoplanet discovery I assumed they found one Earth-sized planet that falls more snuggly in the habitable zone; as many of the previous discoveries were often on the edge of being habitable. My mind was blown when I listened to their announcement, not one but seven Earth-sized planets, three of which fall in the habitable zone. I’m sure you’ve heard all about it by now, but I’m far too excited to spare you from another rendition of this breaking news!
To give you some perspective, including the three new planets, we now have a total of 49 planets that are considered potentially habitable. Of those 49, only 12 of these planets are considered more likely to have a rocky composition and the ability to maintain liquid water on its surface. Included in this number is three of the seven newly discovered planets. Another factor to bear in mind is that we can only detect exoplanets that orbit directly between their stars and our line of site. If their orbits don’t block some of the light emitted from the star, then we cannot detect their presence. This means we are only seeing a fraction of the exoplanets that are out there. Just think, if you take into account how many we can see, just imagine how many stars have planets just likes ours captured in their orbit that we can’t see.
This newly discovered solar system is dubbed TRAPPIST-1. The sun at the center of this system is an ultra-cool dwarf. This sounds like something from the World of Warcraft, instead it is a star much smaller and cooler than our Sun. All seven of the planets orbit very close to one another and to their central star. All seven would fit between our Sun and Mercury, and still can maintain liquid water on their surface. From one planet you could gaze upon the neighboring one, like we do with our Moon.
The TRAPPIST-1 system is exciting because it is only about 39 light-years away, that’s about 235 trillion miles (no big deal, right?). Space is relative, so compared to 267 light-years, it’s not so bad. That’s close enough for other sensors to detect these planets, more specifically for the James Webb Space Telescope (JWST). I never miss an opportunity to gush about the JWST. I’ve been writing about it for years and now we are only about a year from its launch, in October of 2018. The telescope has a 6.5-meter primary mirror and will orbit outside the orbit of the Moon, cutting down on interference from the Earth’s atmosphere. Once operational it will turn its attention to the TRAPPIST-1 system to study the planets’ atmospheres and search for signs of water.
So stay tuned, there are more existing discoveries to come, it’s a brave new world out there.
-
- For this month’s review of technology we feature a list of random technological advancements that caught my attention recently.
First we have two ideas for graphene, one is a biofoam where it is combined with bacteria-produced cellulose to clean water; the other is an enhanced silk that is twice as strong as nature-born silk. This futuristic fabric uses both the sun and your motion to produce renewable power. This research uses sewage to grow desert forests; while this floating desalination plant can produce clean water with 50% less power. Could this star-shaped, highly targeted polymer replace our current approach to antibiotics? An insect-eating fungi could transform the future of insecticides–while this research promises a way to use hydrocarbons without releasing carbon dioxide. Finally, 3D printed magnets could replace traditional versions as they outperform them and produce zero waste.
- For this month’s review of technology we feature a list of random technological advancements that caught my attention recently.
The January 2017 NOAA temperature percentiles map showed small pockets of record warmth over every continent with some cooler temperatures in the western USA and across much of Europe.-
- The January 2017 NOAA global climate report is out and the month was (only, sigh…) the 3rd warmest January on record since 1880, behind just 2016 (the highest) and 2007. Temperatures across the land and ocean were 1.58 degrees Fahrenheit (0.88 degrees Celsius) above the 20th Century Average of 53.6 degrees Fahrenheit (12.0 degrees Celsius). Read more of the first 2017 NOAA climate report here.
-
- It’s March and Spring is still on my mind, so my Google Search of the month was, “GIS and spring flowers.” And while this does not exactly remind me of frolicking in fields of spring flower, it is one solid paper on the use of spatial statistics to estimate wide-spread flower phenology from a limited number of samples by Garcia-Mozo, Galan and Vazquez. Spring cannot come soon enough!
- Last month we reviewed Montgomery, Alabama’s online GIS resources and this month we travel to north-western corner of our nation with a review of Fairbanks, Alaska. As the second largest city in the state, the Fairbanks GIS folks did not have a homepage other than this page which offers themed links to a rather robust online GIS platform. On the GIS platform, you are able to turn on and off layers; zoom around the map; search by attributes and more. I did see a download button but was unable to make it work.
Brock Adam McCarty
Map Wizard
(720) 470-7988
brock@apollomapping.com
Launched in late 2016, Map Mavin is our pay-as-you go GIS cloud that lets users make unlimited public and password-protected web maps. Once you upload your vector and raster files to our secure Amazon cloud, you are ready to make and share your web maps in minutes–just like this demo web map we made with vectors and a base layer TIFF from Boulder, Colorado.
And with our Screen Share function, you can link up with users all around the world to collaborate on a map in real-time. Picture a live webex in your mind but just based around a map that moves and changes as the members of your team update information. Imagine the possibilities of working in real-time with a team of collaborators around the world without any GIS knowledge required!
Priced at just $20 per month with a free trial month, there is no other cloud-based GIS on the market that can compete with Map Mavin on price. For your $20 per month, you are able to store and/or download up to 5 gigabytes (5GB); and once you go over 5GB in a month, it costs you just 75-cents per GB from there! As an added bonus, you can cancel your monthly contract at any time.
March 2017 Product Updates
In the past month, we released several Map Mavin updates that included but were not limited to the following list of fixes, additions and enhancements:
- Clarified language on the Map Mavin sign up page to explain the difference between free view-only accounts and paid web map creation (i.e. admin) accounts.
- Simplified the process for making and saving changes to layer symbology.
- Fixed a bug that prevented users from signing in to emails containing capital letters.
- Fixed transparency display issues for layers in a web map.
- Significantly improved the functionality and stability of the get info tool on active web maps.
- Added scroll bars to long lists of layers in the My Data Layers & Folders section of the Admin panel.
Stay tuned to this series where we will let you know about the Map Mavin changes that were released in the past month.
If you have an improvement or feature addition you would like to add the Map Mavin product road map, let us know by email at support@mapmavin.com.
Are you interested in trying out Map Mavin? If so, you can sign up here. Or maybe you would like a live demo of the product before you sign up? If so, send us an email at support@mapmavin.com and we will get one scheduled right away!
Our goal in the Mapping for Good series is to bring light to projects that use maps and geospatial data to make the world a better place. In some cases, the mission may be very specific: we’ve covered organizations that take photographs of just one part of the world to create an environmental record; and wrote of an even more localized effort to map health trends within the City of Chicago. Sometimes, however, the effort to make data available in one locale can grow into a mission to address mapping needs across the entire globe.
Such is the case with WorldMap, a “collaboratively edited, multilingual, free internet mapping electronic media site open to everyone that is house at the Center for Geographic Analysis at Harvard University.” Though WorldMap’s breadth now covers thousands of datasets and spans the entire world, it evolved from an initial project called AfricaMap. AfricaMap is a website started in 2007 by art historian Suzanne Blier and GIS scientists Ben Lewis and Wendy Guan (it is of note that Lewis also developed the first peer-to-peer GIS system).
The essential goal of AfricaMap was to unite a wide range of cross-disciplinary information in a single, centralized mapping environment, from health data to linguistic layers, infrastructure and transportation datasets, and with the ability to load high resolution satellite imagery in the background. Over time the ability for users to upload data themselves was enabled, and soon the desire and need to expand the project beyond the scope of Africa became apparent.
WorldMap’s current range of applications is vast, spanning from personal use to large-scale projects operated in partnership with international organizations.
Here are just some examples of its scope:
- The United Nations uses WorldMap to address the illicit trade of flora and fauna in East Africa.
- WorldMap collaborates with Emory University to make available data from the Trans-Atlantic Slave Database.
- The American Theological Library Association (ATLA) partners with Harvard and WorldMap to share information from its ATLA Religion Database on the site.
Most importantly, WorldMap is free and open to everyone. It is this unfettered access that gives the project its true value, as allowing anyone to use it inevitably promotes collaboration between groups that would otherwise struggle to connect across physical, technological or bureaucratic boundaries. With anyone able to upload map layers and datasets, users and organizations alike are better able to visualize data and find spatial relationships that may not otherwise have been discovered.
If you would like to learn more about AfricaMap and WorldMap, or are interested in trying it out for yourself, we encourage you to do so by visiting worldmap.harvard.edu.
Fletcher Berryman
Cloud Tamer
(970) 710-0909
fletcher@apollomapping.com
Map Mavin is our GIS cloud, have you checked it out yet? If not, you can find out more information about it here.
If Map Mavin looks like a service you could use to create the web maps required for your next project, then you need to check out this monthly article where we give away up to five (5) free subscriptions!
So here is how this will work. Each month, we will give away up to five free one-month subscriptions to Map Mavin–that is a $20 value per subscription! Included in this free one-month subscription is 5 gigabytes (GB) of cloud-based storage and download bandwidth, plus you even get an additional free trial month. Once you exceed this 5 GB limit, you would be charged $0.75 per GB for the storage and/or bandwidth you use in the rest of the month. Then you would pay a base rate of $20 per month for Map Mavin from there if you decide to keep the service active. If you are already a Map Mavin client, we will credit your account $20 if you win the contest.
To win, you will need to submit the correct answer to the trivia question below. You have 24 hours from the time our newsletter sends to submit your answer. We will randomly draw the five winners from the group of readers who answered correctly; and then announce these winners in the next edition of The Geospatial Times.
Okay, ready, set, here we go:
This former house and now museum of a famous American author is located less than one mile from a well-known baseball stadium that has a common unit of measurement as part of its name. To win, provide the stadium name, the author and address of the former house/museum.
You have 24 hours to get us the correct answer to this question by email. Please submit your answers to sales@apollomapping.com.
February 2017 Free For All Answer & Winners!
Last month’s answer was the Smithsonian Institution Building (or the Castle) which is part of the Smithsonian Museum and was funded by English donor, James Smithson. Last month’s winner of the $20 Map Mavin credit was Forrest Sherman, nice work!
Good luck winning our monthly prize and let us know if you have any questions about Map Mavin!
In this month’s edition of Map Mavin Methods, we will show you how to take advantage of a simple yet powerful tool that’s built into Map Mavin, i.e. the Hover Field tool. The Hover Field tool allows users to decide which attribute will show up in a text bubble when a given feature (point, line, polygon, etc.) is hovered over by the cursor within a web map. Our corresponding video explains how the hover field works in relation to attribute tables–and gives a brief explanation of attribute tables for those of you who may be unfamiliar. The video also shows how a user can best put this feature to use.
While we will go into more detail in future Map Mavin Methods articles about how attribute tables work for those who may not be familiar with them, the easiest way to understand an attribute table (in the context of mapping) is as a spreadsheet that allows one to tie demography, descriptive details, geography and/or other pertinent information to each feature in a layer. For example (as seen in our video as well), the City of Boulder maintains a spreadsheet that contains information on the status of all of the publicly owned trees that it oversees–including address, street name, species, when it was last trimmed, the soil type it lives in and the actual coordinates that detail exactly where it’s located; among many other attributes. This table is the “backend” of what you see on a map when you upload the “Boulder Trees” shapefile. Each bit of information is tied to a particular point on the map, with each point representing a single tree.
Our Hover Field tool allows users to decide which of the many categories of information will show up when a cursor is hovered over a given tree. One may wish to know the soil it’s in, or whether or not the tree is known to be diseased. In Map Mavin, users can select one or multiple attributes to be displayed when hovering over a point, line or polygon.
Check out our video to see the tool in action and learn more about how you can easily apply it to your Map Mavin projects!
If you have any questions or comments regarding this mini-lesson or would like to request a live Map Mavin demo, feel free to reach out to Fletcher at fletcher@apollomapping.com or call at 970-710-0909.
Fletcher Berryman
Cloud Tamer
(970) 710-0909
fletcher@apollomapping.com
The Juno spacecraft is whizzing around Jupiter and its highly destructive atmosphere, gathering as much data as it can before it succumbs to the inevitable. On December 11th, Juno captured a breathtaking image of Jupiter’s northern latitudes. Juno was performing a close flyby of the planet, at an altitude of 10,300 miles (16,600 kilometers) when the JunoCam imager grabbed this shot. You can see the Little Red Spot in the lower left region of the photo. Little is only by comparison, as it is actually a giant storm and the third largest of its kind on the gas planet.
These anticyclones occur in regions of high pressure and large-scale wind circulation, and we are talking about winds speeds of 600 kilometers per hour (kph). Most of us have heard of the largest anticyclone, the Great Red Spot, which has been observed from Earth for 350 years. They are similar to our hurricanes and tornados in how they behave. Many factors contribute to the longevity of these storms, including Jupiter’s fast spin, the lack of atmospheric layers and almost limitless energy from the planet’s thick atmosphere.
NASA is taking suggestions and votes for where to image during their next close flyby of the planet. They are limited by digital storage space on the craft, so they have to be selective. You can cast your votes for the next close up view here. Juno begins its flyby at the North Pole and two hours later emerges from the South Pole. These close ups allow the spacecraft to take high-resolution images of specific features and areas on Jupiter. NASA wants to know what you have been dying to see on the massive gas planet.
Jupiter is in many ways a mystery, its swirling clouds and thick layers make it very difficult to probe deeper into the planet to better understand its composition. Juno’s mission is to help unravel these mysteries before its sensor are destroyed by the intense radiation from the planet.



